SEARCH

SEARCH BY CITATION

Cited in:

CrossRef

This article has been cited by:

  1. 1
    Shanqing Xu, Jianhu Shen, Shiwei Zhou, Xiaodong Huang, Yi Min Xie, Design of lattice structures with controlled anisotropy, Materials & Design, 2016, 93, 443

    CrossRef

  2. 2
    Volker Weißmann, Rainer Bader, Harald Hansmann, Nico Laufer, Influence of the structural orientation on the mechanical properties of selective laser melted Ti6Al4V open-porous scaffolds, Materials & Design, 2016, 95, 188

    CrossRef

  3. 3
    L.-C. Zhang, H. Attar, M. Calin, J. Eckert, Review on manufacture by selective laser melting and properties of titanium based materials for biomedical applications, Materials Technology, 2016, 31, 2, 66

    CrossRef

  4. 4
    Lai-Chang Zhang, Hooyar Attar, Selective Laser Melting of Titanium Alloys and Titanium Matrix Composites for Biomedical Applications: A Review , Advanced Engineering Materials, 2016, 18, 4
  5. 5
    Xiaojian Wang, Shanqing Xu, Shiwei Zhou, Wei Xu, Martin Leary, Peter Choong, M. Qian, Milan Brandt, Yi Min Xie, Topological design and additive manufacturing of porous metals for bone scaffolds and orthopaedic implants: A review, Biomaterials, 2016, 83, 127

    CrossRef

  6. 6
    Jaejong Park, Alok Sutradhar, A multi-resolution method for 3D multi-material topology optimization, Computer Methods in Applied Mechanics and Engineering, 2015, 285, 571

    CrossRef

  7. 7
    Timothy B. Sercombe, Xiaoxue Xu, V.J. Challis, Richard Green, Sheng Yue, Ziyu Zhang, Peter D. Lee, Failure modes in high strength and stiffness to weight scaffolds produced by Selective Laser Melting, Materials & Design, 2015, 67, 501

    CrossRef

  8. 8
    Guenaelle Bouet, David Marchat, Magali Cruel, Luc Malaval, Laurence Vico, In VitroThree-Dimensional Bone Tissue Models: From Cells to Controlled and Dynamic Environment, Tissue Engineering Part B: Reviews, 2015, 21, 1, 133

    CrossRef

  9. 9
    Nan Yang, Yanling Tian, Dawei Zhang, Novel real function based method to construct heterogeneous porous scaffolds and additive manufacturing for use in medical engineering, Medical Engineering & Physics, 2015, 37, 11, 1037

    CrossRef

  10. 10
    D. C. Guth, M. A. Luersen, P. A. Muñoz-Rojas, Optimization of three-dimensional truss-like periodic materials considering isotropy constraints, Structural and Multidisciplinary Optimization, 2015, 52, 5, 889

    CrossRef

  11. 11
    Y.J. Liu, X.P. Li, L.C. Zhang, T.B. Sercombe, Processing and properties of topologically optimised biomedical Ti–24Nb–4Zr–8Sn scaffolds manufactured by selective laser melting, Materials Science and Engineering: A, 2015, 642, 268

    CrossRef

  12. 12
    P. D. Dunning, C. J. Brampton, H. A. Kim, Simultaneous optimisation of structural topology and material grading using level set method, Materials Science and Technology, 2015, 31, 8, 884

    CrossRef

  13. 13
    Joshua D. Deaton, Ramana V. Grandhi, A survey of structural and multidisciplinary continuum topology optimization: post 2000, Structural and Multidisciplinary Optimization, 2014, 49, 1, 1

    CrossRef

  14. 14
    S.M. Giannitelli, D. Accoto, M. Trombetta, A. Rainer, Current trends in the design of scaffolds for computer-aided tissue engineering, Acta Biomaterialia, 2014, 10, 2, 580

    CrossRef

  15. 15
    Yi Min Xie, Xiaoying Yang, Jianhu Shen, Xiaolei Yan, Arash Ghaedizadeh, Jianhua Rong, Xiaodong Huang, Shiwei Zhou, Designing orthotropic materials for negative or zero compressibility, International Journal of Solids and Structures, 2014, 51, 23-24, 4038

    CrossRef

  16. 16
    Vivien J. Challis, Anthony P. Roberts, Joseph F. Grotowski, High resolution topology optimization using graphics processing units (GPUs), Structural and Multidisciplinary Optimization, 2014, 49, 2, 315

    CrossRef

  17. 17
    Vivien J. Challis, Xiaoxue Xu, Lai Chang Zhang, Anthony P. Roberts, Joseph F. Grotowski, Timothy B. Sercombe, High specific strength and stiffness structures produced using selective laser melting, Materials & Design, 2014, 63, 783

    CrossRef

  18. 18
    Jan Wieding, Andreas Wolf, Rainer Bader, Numerical optimization of open-porous bone scaffold structures to match the elastic properties of human cortical bone, Journal of the Mechanical Behavior of Biomedical Materials, 2014, 37, 56

    CrossRef

  19. 19
    Longyu Zhao, Seunghyun Ha, Keith W. Sharp, Andrew B. Geltmacher, Richard W. Fonda, Alex H. Kinsey, Yong Zhang, Stephen M. Ryan, Dinc Erdeniz, David C. Dunand, Kevin J. Hemker, James K. Guest, Timothy P. Weihs, Permeability measurements and modeling of topology-optimized metallic 3-D woven lattices, Acta Materialia, 2014, 81, 326

    CrossRef

  20. 20
    Jan Wieding, Robert Souffrant, Wolfram Mittelmeier, Rainer Bader, Finite element analysis on the biomechanical stability of open porous titanium scaffolds for large segmental bone defects under physiological load conditions, Medical Engineering & Physics, 2013, 35, 4, 422

    CrossRef

  21. 21
    Joseph E. Cadman, Shiwei Zhou, Yuhang Chen, Qing Li, On design of multi-functional microstructural materials, Journal of Materials Science, 2013, 48, 1, 51

    CrossRef

  22. 22
    Vivien J. Challis, James K. Guest, Joseph F. Grotowski, Anthony P. Roberts, Computationally generated cross-property bounds for stiffness and fluid permeability using topology optimization, International Journal of Solids and Structures, 2012, 49, 23-24, 3397

    CrossRef

  23. 23
    Xu-bin SU, Yong-qiang YANG, Peng YU, Jian-feng SUN, Development of porous medical implant scaffolds via laser additive manufacturing, Transactions of Nonferrous Metals Society of China, 2012, 22, s181

    CrossRef

  24. 24
    Gladius Lewis, Nucleus pulposus replacement and regeneration/repair technologies: Present status and future prospects, Journal of Biomedical Materials Research Part B: Applied Biomaterials, 2012, 100B, 6
  25. 25
    Susan Nachtrab, Sebastian C. Kapfer, Dominik Rietzel, Dietmar Drummer, Mahyar Madadi, Christoph H. Arns, Andrew M. Kraynik, Gerd E. Schröder-Turk, Klaus Mecke, Tuning Elasticity of Open-Cell Solid Foams and Bone Scaffolds via Randomized Vertex Connectivity, Advanced Engineering Materials, 2012, 14, 1-2
  26. 26
    Yuhang Chen, Michiel Schellekens, Shiwei Zhou, Joseph Cadman, Wei Li, Richard Appleyard, Qing Li, Design Optimization of Scaffold Microstructures Using Wall Shear Stress Criterion Towards Regulated Flow-Induced Erosion, Journal of Biomechanical Engineering, 2011, 133, 8, 081008

    CrossRef

  27. 27
    A.P. Roberts, G. Grayson, V.J. Challis, L.C. Zhang, J.F. Grotowski, G.B. Schaffer, T.B. Sercombe, Elastic moduli of sintered powders with application to components fabricated using selective laser melting, Acta Materialia, 2011, 59, 13, 5257

    CrossRef