Adv. Eng. Mater, 2013, 15, 379 DOI: 10.1002/adem.201200233

The following corrections of the above manuscript should be noted:

The figure of merit zT was calculated wrong in Figure 4 and 5e of the above manuscript. The correct calculation can be seen in Figure 1 below. Also the maximum zT value is rather 0.30 at 700 °C than 0.32 as mentioned in the abstract, introduction and Section 2.2. However, the wrong calculation doesn't affect the discussion nor the interpretation.


Figure 1. Correct calculation of zT for (a) Figure 4 and (b) Figure 5e in the above manuscript.

Download figure to PowerPoint