Front Cover Advanced Engineering Materials 4/2013

Authors

  • Steferson Luiz Stares,

    Corresponding author
    1. Department of Materials Science and Engineering (Glass and Ceramics), University of Erlangen-Nuremberg, Martensstr. 5, D-91058 Erlangen, Germany
    2. Central Institute for New Materials and Processing Technology (ZMP), Dr.-Mack-Str.81, D-90762 Fürth, Germany
    3. Biontech Degradable Polymers, Av. Papemborg s/n, CEP-88190-000 - Governador Celso Ramos, Brazil
    • Department of Materials Science and Engineering (Glass and Ceramics), University of Erlangen-Nuremberg, Martensstr. 5, D-91058 Erlangen, Germany.
    Search for more papers by this author
  • Alina Kirilenko,

    1. Department of Technology of Silicates and Synthesis of Minerals, M.Auezov South Kazakhstan State University, Tauke Khan Avenue 5, PC-160012 Shymkent, Kazakhstan
    Search for more papers by this author
  • Márcio Celso Fredel,

    1. Departament of Mechanical Engineerings, Federal University of Santa Catarina, Campus Universitário, CEP-88040-900 - Florianópolis, Brazil
    Search for more papers by this author
  • Peter Greil,

    1. Department of Materials Science and Engineering (Glass and Ceramics), University of Erlangen-Nuremberg, Martensstr. 5, D-91058 Erlangen, Germany
    2. Central Institute for New Materials and Processing Technology (ZMP), Dr.-Mack-Str.81, D-90762 Fürth, Germany
    Search for more papers by this author
  • Lothar Wondraczek,

    1. Department of Materials Science and Engineering (Glass and Ceramics), University of Erlangen-Nuremberg, Martensstr. 5, D-91058 Erlangen, Germany
    2. Central Institute for New Materials and Processing Technology (ZMP), Dr.-Mack-Str.81, D-90762 Fürth, Germany
    Search for more papers by this author
  • Nahum Travitzky

    1. Department of Materials Science and Engineering (Glass and Ceramics), University of Erlangen-Nuremberg, Martensstr. 5, D-91058 Erlangen, Germany
    2. Central Institute for New Materials and Processing Technology (ZMP), Dr.-Mack-Str.81, D-90762 Fürth, Germany
    Search for more papers by this author

Abstract

original image

A novel bioactive glass-loaded paper was developed with the goal of fabricating structures for use in bone reconstruction. The cover shows the surface of bioactive glass bodies, which is manufactured by preceramic paper. For further details see the article by Steferson Luiz Stares et al. on page 230.

Ancillary