A rapid, simple, and efficient method for the preparation of highly dispersed supported Au catalysts has been developed. In the preparation, NaBH4 is used to reduce the Au precursor, lysine is employed to cap the formed Au colloids, and a short sonication time is applied to facilitate dispersion and deposition of the Au colloids onto the catalyst support, which has been mixed with the precursor beforehand. The end-point pH value of the solution and the isoelectric points (IEPs) of the catalyst supports have an influence on the size of the Au particles and their deposition. The optimum value for the end-point pH is 7.5–10.0, and the IEP should be 5–10. The amino acid capping agent is easily removed at the catalyst activation stage at 200 °C, and the Au particles are thermally stable against sintering, even at 500 °C for 3 h. It is also proven that the method is applicable to the preparation of supported Pt catalysts. The catalytic activity of the prepared Au catalysts for CO oxidation in the absence/presence of H2 is comparable to that of a Au catalyst prepared by the co-precipitation (CP) method, and to that of the standard catalyst from the World Gold Council (WGC). X-ray photoelectron spectroscopy (XPS) results show that only metallic Au exists in the catalysts before and after activation, and also after the catalysis reaction.
If you can't find a tool you're looking for, please click the link at the top of the page to "Go to old article view". Alternatively, view our Knowledge Base articles for additional help. Your feedback is important to us, so please let us know if you have comments or ideas for improvement.