Cover Picture: Three-Dimensional SiCN Ceramic Microstructures via Nano-Stereolithography of Inorganic Polymer Photoresists (Adv. Funct. Mater. 9/2006)
Article first published online: 26 MAY 2006
Copyright © 2006 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim
Advanced Functional Materials
Volume 16, Issue 9, June, 2006
How to Cite
Pham, T. A., Kim, D.-P., Lim, T.-W., Park, S.-H., Yang, D.-Y. and Lee, K.-S. (2006), Cover Picture: Three-Dimensional SiCN Ceramic Microstructures via Nano-Stereolithography of Inorganic Polymer Photoresists (Adv. Funct. Mater. 9/2006). Adv. Funct. Mater., 16: n/a. doi: 10.1002/adfm.200690032
- Issue published online: 26 MAY 2006
- Article first published online: 26 MAY 2006
- Cited By
- Micropatterning, 3D;
- Resist materials, inorganic polymer
An inorganic polymer photoresist was successfully synthesized for the first time with high photosensitivity and a high ceramic yield. Furthermore, it is shown by Kim, Yang, and co-workers on p. 1235 that a nano-stereolithography process linked with careful pyrolysis of this resin paves the way for the fabrication of 2D and 3D ceramic microstructures (examples of which are shown on the cover) with high spatial resolution.
We report a newly synthesized inorganic polymer photoresist with a high ceramic yield by the functionalization of polyvinylsilazane (KiON VL20) with 2-isocyanatoethyl methacrylate via linkage or insertion reaction routes. The chemistry of the synthesis and the pyrolytic conversion as well as the mechanical evaluation were investigated by using various analytical instruments. We show for the first time that this photosensitive resin is a novel precursor for the fabrication of complex 3D SiCN ceramic microstructures with a 210 nm resolution via a two-photon absorbed crosslinking process and subsequent pyrolysis at 600 °C under a nitrogen atmosphere. Moreover, the dimensional deformation during pyrolysis was significantly reduced by adding silica nanoparticles as a filler. In particular, the ceramic microstructures containing 40 wt % silica nanoparticles exhibited a relatively isotropic shrinkage owing to its sliding free from the substrate during pyrolysis.