A review and expansion of the fundamental processes of the vapor–liquid–solid (VLS) growth mechanism for nanowires is presented. Although the focus is on nanowires, most of the concepts may be applicable to whiskers, nanotubes, and other unidirectional growth. Important concepts in the VLS mechanism such as preferred deposition, supersaturation, and nucleation are examined. Nanowire growth is feasible using a wide range of apparatuses, material systems, and growth conditions. For nanowire growth the unidirectional growth rate must be much higher than growth rates of other surfaces and interfaces. It is concluded that a general, system independent mechanism should describe why nanowires grow faster than the surrounding surfaces. This mechanism is based on preferential nucleation at the interface between a mediating material called the collector and a crystalline solid. The growth conditions used mean the probability of nucleation is low on most of the surfaces and interfaces. Nucleation at the collector-crystal interface is however different and of special significance is the edge of the collector-crystal interface where all three phases meet. Differences in nucleation due to different crystallographic interfaces can occur even in two phase systems. We briefly describe how these differences in nucleation may account for nanowire growth without a collector. Identifying the mechanism of nanowire growth by naming the three phases involved began with the naming of the VLS mechanism. Unfortunately this trend does not emphasize the important concepts of the mechanism and is only relevant to one three phase system. We therefore suggest the generally applicable term preferential interface nucleation as a replacement for these different names focusing on a unifying mechanism in nanowire growth.
If you can't find a tool you're looking for, please click the link at the top of the page to "Go to old article view". Alternatively, view our Knowledge Base articles for additional help. Your feedback is important to us, so please let us know if you have comments or ideas for improvement.