Foaming is a common phenomenon in industrial processes, including wet flue gas desulfurization (FGD) plants. A systemic investigation of the influence of two foaming agents, sodium dodecyl sulphate (SDS) and egg white albumin (protein), and two commercial antifoams on a wet FGD pilot plant operation has been carried out. Foaming caused by 0.03 g SDS/(L slurry) reduced the desulfurization degree from 84 to 74% and the solids and limestone concentrations of the slurry from 58 to 48 g/(L slurry) and from 1.4 to 1.0 g/(L slurry), respectively. These effects were attributed to the foaming transferring small particles to the foam layer present on top of the slurry in the holding tank. The addition of 0.03 g antifoams/(L slurry) to SDS foam eliminated the foam, but the desulfurization degree remained low. Potential mechanisms for the observed behavior are analyzed. © 2014 American Institute of Chemical Engineers AIChE J, 60: 2382–2388, 2014
If you can't find a tool you're looking for, please click the link at the top of the page to "Go to old article view". Alternatively, view our Knowledge Base articles for additional help. Your feedback is important to us, so please let us know if you have comments or ideas for improvement.