SEARCH

SEARCH BY CITATION

Cited in:

CrossRef

This article has been cited by:

  1. 1
    Mirko Skiborowski, Andreas Harwardt, Wolfgang Marquardt, Efficient optimization-based design for the separation of heterogeneous azeotropic mixtures, Computers & Chemical Engineering, 2015, 72, 34

    CrossRef

  2. 2
    Teng Zhou, Kevin McBride, Xiang Zhang, Zhiwen Qi, Kai Sundmacher, Integrated solvent and process design exemplified for a Diels–Alder reaction, AIChE Journal, 2015, 61, 1
  3. 3
    Nor Alafiza Yunus, Krist V. Gernaey, John M. Woodley, Rafiqul Gani, A systematic methodology for design of tailor-made blended products, Computers & Chemical Engineering, 2014, 66, 201

    CrossRef

  4. 4
    Juliette Heintz, Jean-Pierre Belaud, Nishant Pandya, Moises Teles Dos Santos, Vincent Gerbaud, Computer aided product design tool for sustainable product development, Computers & Chemical Engineering, 2014, 71, 362

    CrossRef

  5. 5
    Abdul Qadir, Matteo Chiesa, Ali Abbas, In silico design of solvents for carbon capture with simultaneous optimisation of operating conditions, International Journal of Greenhouse Gas Control, 2014, 30, 179

    CrossRef

  6. 6
    Mingsen Liao, Yuehong Zhao, Pengge Ning, Hongbin Cao, Hao Wen, Yi Zhang, Optimal Design of Solvent Blend and Its Application in Coking Wastewater Treatment Process, Industrial & Engineering Chemistry Research, 2014, 53, 39, 15071

    CrossRef

  7. 7
    Mansi Garg, Monika Chauhan, Pankaj Kumar Singh, Jimi Marin Alex, Raj Kumar, Pyrazoloquinazolines: Synthetic strategies and bioactivities, European Journal of Medicinal Chemistry, 2014,

    CrossRef

  8. 8
    Sandra B. Glisic, Aleksandar M. Orlović, Review of biodiesel synthesis from waste oil under elevated pressure and temperature: Phase equilibrium, reaction kinetics, process design and techno-economic study, Renewable and Sustainable Energy Reviews, 2014, 31, 708

    CrossRef

  9. 9
    José A. Scilipoti, Martín Cismondi, Alfonsina E. Andreatta, Esteban A. Brignole, Selection of Solvents with A-UNIFAC Applied to Detoxification of Aqueous Solutions, Industrial & Engineering Chemistry Research, 2014, 53, 44, 17051

    CrossRef

  10. 10
    Rafiqul Gani, Ka M. Ng, Proceedings of the 8th International Conference on Foundations of Computer-Aided Process Design, 2014,

    CrossRef

  11. 11
    J. Abildskov, M.B. van Leeuwen, C.G. Boeriu, L.A.M. van den Broek, Computer-aided solvent screening for biocatalysis, Journal of Molecular Catalysis B: Enzymatic, 2013, 85-86, 200

    CrossRef

  12. 12
    Apurva Samudra, Nikolaos V. Sahinidis, Design of Heat-Transfer Media Components for Retail Food Refrigeration, Industrial & Engineering Chemistry Research, 2013, 52, 25, 8518

    CrossRef

  13. 13
    Apurva P. Samudra, Nikolaos V. Sahinidis, Optimization-based framework for computer-aided molecular design, AIChE Journal, 2013, 59, 10
  14. 14
    Derick C. Weis, Douglas R. MacFarlane, Computer-Aided Molecular Design of Ionic Liquids: An Overview, Australian Journal of Chemistry, 2012, 65, 11, 1478

    CrossRef

  15. 15
    Elisa Conte, Rafiqul Gani, Yuen S. Cheng, Ka M. Ng, Design of formulated products: Experimental component, AIChE Journal, 2012, 58, 1
  16. 16
    Shawn Martin, Lattice Enumeration for Inverse Molecular Design Using the Signature Descriptor, Journal of Chemical Information and Modeling, 2012, 52, 7, 1787

    CrossRef

  17. 17
    João A. P. Coutinho, Pedro J. Carvalho, Nuno M. C. Oliveira, Predictive methods for the estimation of thermophysical properties of ionic liquids, RSC Advances, 2012, 2, 19, 7322

    CrossRef

  18. 18
    Brock C. Roughton, Brianna Christian, John White, Kyle V. Camarda, Rafiqul Gani, Simultaneous design of ionic liquid entrainers and energy efficient azeotropic separation processes, Computers & Chemical Engineering, 2012, 42, 248

    CrossRef

  19. 19
    Abdualnaser Muftah Almagrbi, Sandra B. Glisic, Aleksandar M. Orlovic, The phase equilibrium of triglycerides and ethanol at high pressure and temperature: The influence on kinetics of ethanolysis, The Journal of Supercritical Fluids, 2012, 61, 2

    CrossRef

  20. 20
    JJ Victoria Villeda, M Dahmen, M Hechinger, A Voll, W Marquardt, Towards model-based design of biofuel value chains<!–<RunningTitle>Towards model-based design of biofuel value chains</RunningTitle>–>, Current Opinion in Chemical Engineering, 2012, 1, 4, 465

    CrossRef

  21. 21
    Igor Mitrofanov, Sascha Sansonetti, Jens Abildskov, Gürkan Sin, Rafiqul Gani, 22nd European Symposium on Computer Aided Process Engineering, 2012,

    CrossRef

  22. 22
    Urmila Diwekar, Yogendra Shastri, Design for environment: a state-of-the-art review, Clean Technologies and Environmental Policy, 2011, 13, 2, 227

    CrossRef

  23. 23
    Pimporn Lek-utaiwan, Bunyaphat Suphanit, Peter L. Douglas, Nakarin Mongkolsiri, Design of extractive distillation for the separation of close-boiling mixtures: Solvent selection and column optimization, Computers & Chemical Engineering, 2011, 35, 6, 1088

    CrossRef

  24. 24
    Luz Maria Chávez-Islas, Ruben Vasquez-Medrano, Antonio Flores-Tlacuahuac, Optimal Molecular Design of Ionic Liquids for High-Purity Bioethanol Production, Industrial & Engineering Chemistry Research, 2011, 50, 9, 5153

    CrossRef

  25. 25
    Athanasios I. Papadopoulos, Mirko Stijepovic, Patrick Linke, On the systematic design and selection of optimal working fluids for Organic Rankine Cycles, Applied Thermal Engineering, 2010, 30, 6-7, 760

    CrossRef

  26. 26
    Sandra B. Glišić, Dejan U. Skala, Phase transition at subcritical and supercritical conditions of triglycerides methanolysis, The Journal of Supercritical Fluids, 2010, 54, 1, 71

    CrossRef

  27. 27
    Milojevic Svetomir, Glisic Sandra, Skala Dejan, The batch fractionation of Juniperus communis L. essential oil: Experimental study, mathematical simulation and process economy, Chemical Industry and Chemical Engineering Quarterly, 2010, 16, 2, 183

    CrossRef

  28. 28
    Srinivas S. Godavarthy, Krishna M. Yerramsetty, Vijay K. Rachakonda, Brian J. Neely, Sundararajan V. Madihally, Robert L. Robinson, Khaled A.M. Gasem, Design of improved permeation enhancers for transdermal drug delivery, Journal of Pharmaceutical Sciences, 2009, 98, 11
  29. 29
    Ramesh L. Gardas, João A. P. Coutinho, Group contribution methods for the prediction of thermophysical and transport properties of ionic liquids, AIChE Journal, 2009, 55, 5
  30. 30
    Fadwa T. Eljack, Mario R. Eden, A systematic visual approach to molecular design via property clusters and group contribution methods, Computers & Chemical Engineering, 2008, 32, 12, 3002

    CrossRef

  31. 31
    Mourad Korichi, Vincent Gerbaud, Pascal Floquet, A.-Hassan Meniai, Saci Nacef, Xavier Joulia, Computer aided aroma design I–Molecular knowledge framework, Chemical Engineering and Processing: Process Intensification, 2008, 47, 11, 1902

    CrossRef

  32. 32
    Mourad Korichi, Vincent Gerbaud, Thierry Talou, Pascal Floquet, A.-Hassan Meniai, Saci Nacef, Computer-aided aroma design. II. Quantitative structure–odour relationship, Chemical Engineering and Processing: Process Intensification, 2008, 47, 11, 1912

    CrossRef

  33. 33
    J. Song, H.-H. Song, Computer-Aided Molecular Design of Environmentally Friendly Solvents for Separation Processes, Chemical Engineering & Technology, 2008, 31, 2
  34. 34
    Srinivasa S. Godavarthy, Robert L. Robinson, Khaled A.M. Gasem, Improved structure–property relationship models for prediction of critical properties, Fluid Phase Equilibria, 2008, 264, 1-2, 122

    CrossRef

  35. 35
    Hou-Chieh Cheng, Feng-Sheng Wang, Optimal biocompatible solvent design for a two-stage extractive fermentation process with cell recycling, Computers & Chemical Engineering, 2008, 32, 7, 1385

    CrossRef

  36. 36
    Arunprakash T. Karunanithi, Charles Acquah, Luke E.K. Achenie, Tuning the Morphology of Pharmaceutical Compounds via Model Based Solvent Selection, Chinese Journal of Chemical Engineering, 2008, 16, 3, 465

    CrossRef

  37. 37
    Rafiqul Gani, Chemical Product Design: Toward a Perspective Through Case Studies, 2007,

    CrossRef

  38. 38
    I. Stanescu, R. R. Gupta, L. E. K. Achenie, Anin-silicostudy of solvent effects on the Kolbe–Schmitt reaction using a DFT method, Molecular Simulation, 2006, 32, 3-4, 279

    CrossRef

  39. 39
    X. Yang, H. Song, Computer Aided Molecular Design of Solvents for Separation Processes, Chemical Engineering & Technology, 2006, 29, 1
  40. 40
    Athanasios I. Papadopoulos, Patrick Linke, Multiobjective molecular design for integrated process-solvent systems synthesis, AIChE Journal, 2006, 52, 3
  41. 41
    Biaohua Chen, Zhigang Lei, Qunsheng Li, Chengyue Li, Application of CAMD in separating hydrocarbons by extractive distillation, AIChE Journal, 2005, 51, 12
  42. 42
    B. Lin, S. Chavali, K. Camarda, D.C. Miller, Computer-aided molecular design using Tabu search, Computers & Chemical Engineering, 2005, 29, 2, 337

    CrossRef

  43. 43
    Zhigang Lei, Biaohua Chen, Zhongwei Ding, Special Distillation Processes, 2005,

    CrossRef

  44. 44
    R. Gani, Computer-Aided Methods and Tools for Chemical Product Design, Chemical Engineering Research and Design, 2004, 82, 11, 1494

    CrossRef

  45. 45
    KI-JOO KIM, URMILA M. DIWEKAR, KEITH G. TOMAZI, ENTRAINER SELECTION AND SOLVENT RECYCLING IN COMPLEX BATCH DISTILLATION, Chemical Engineering Communications, 2004, 191, 12, 1606

    CrossRef

  46. 46
    Soorathep Kheawhom, Masahiko Hirao, Environmentally Benign Separation Process Synthesis, JOURNAL OF CHEMICAL ENGINEERING OF JAPAN, 2004, 37, 2, 243

    CrossRef

  47. 47
    Luke E.K. Achenie, Manish Sinha, The design of blanket wash solvents with environmental considerations, Advances in Environmental Research, 2004, 8, 2, 213

    CrossRef

  48. 48
    Nikolaos V. Sahinidis, Mohit Tawarmalani, Minrui Yu, Design of alternative refrigerants via global optimization, AIChE Journal, 2003, 49, 7
  49. 49
    Zhigang Lei, Chengyue Li, Biaohua Chen, Extractive Distillation: A Review, Separation & Purification Reviews, 2003, 32, 2, 121

    CrossRef

  50. 50
    Apostolos Giovanoglou, Julie Barlatier, Claire S. Adjiman, Efstratios N. Pistikopoulos, Joan L. Cordiner, Optimal solvent design for batch separation based on economic performance, AIChE Journal, 2003, 49, 12
  51. 51
    Yiping Wang, Luke E.K. Achenie, Computer aided solvent design for extractive fermentation, Fluid Phase Equilibria, 2002, 201, 1, 1

    CrossRef

  52. 52
    Georgios Kontogeorgis, Handbook of Surface and Colloid Chemistry, Second Edition, 2002,

    CrossRef

  53. 53
    A. Buxton, A. Hugo, A.G. Livingston, E.N. Pistikopoulos, Computer Aided Molecular Design: Theory and Practice, 2002,

    CrossRef

  54. 54
    A. Apostolakou, C.S. Adjiman, Computer Aided Molecular Design: Theory and Practice, 2002,

    CrossRef

  55. 55
    A. Apostolakou, C.S. Adjiman, Computer Aided Molecular Design: Theory and Practice, 2002,

    CrossRef

  56. 56
    P.M. Harper, H. Hostrup, R. Gani, Computer Aided Molecular Design: Theory and Practice, 2002,

    CrossRef

  57. 57
    E.A. Brignole, M. Cismondi, Computer Aided Molecular Design: Theory and Practice, 2002,

    CrossRef

  58. 58
    A. Sundaram, V. Venkatasubramanianan, J.M. Caruthers, Computer Aided Molecular Design: Theory and Practice, 2002,

    CrossRef

  59. 59
    P.R. Patkar, V. Venkatasubramanian, Computer Aided Molecular Design: Theory and Practice, 2002,

    CrossRef

  60. 60
    R. Gani, L.E.K. Achenie, V. Venkatasubramanian, Computer Aided Molecular Design: Theory and Practice, 2002,

    CrossRef

  61. 61
    Manish C. Tayal, Urmila M. Diwekar, Novel sampling approach to optimal molecular design under uncertainty, AIChE Journal, 2001, 47, 3
  62. 62
    Manish Sinha, Luke E.K. Achenie, Systematic design of blanket wash solvents with recovery considerations, Advances in Environmental Research, 2001, 5, 3, 239

    CrossRef

  63. 63
    M. Cismondi, E.A. Brignole, European Symposium on Computer Aided Process Engineering - 11, 34th European Symposium of the Working Party on Computer Aided Process Engineering, 2001,

    CrossRef

  64. 64
    Costas D. Maranas, European Symposium on Computer Aided Process Engineering - 11, 34th European Symposium of the Working Party on Computer Aided Process Engineering, 2001,

    CrossRef

  65. 65
    A.-H Meniai, D.M.T Newsham, Molecular solvent design for liquid–liquid extraction using the UNIQUAC model, Fluid Phase Equilibria, 1999, 158-160, 327

    CrossRef

  66. 66
    Andrew Buxton, Andrew G. Livingston, Efstratios N. Pistikopoulos, Optimal design of solvent blends for environmental impact minimization, AIChE Journal, 1999, 45, 4
  67. 67
    Shankar Vaidyaraman, Costas D. Maranas, Optimal synthesis of refrigeration cycles and selection of refrigerants, AIChE Journal, 1999, 45, 5
  68. 68
    Konstantinos Holiastos, Vasilios Manousiouthakis, Automatic synthesis of thermodynamically feasible reaction clusters, AIChE Journal, 1998, 44, 1
  69. 69
    J.E. Ourique, A. Silva Telles, Computer-aided molecular design with simulated annealing and molecular graphs, Computers & Chemical Engineering, 1998, 22, S615

    CrossRef

  70. 70
    Michael L. Mavrovouniotis, Design of chemical compounds, Computers & Chemical Engineering, 1998, 22, 6, 713

    CrossRef

  71. 71
    C.A. Ruiz, C. Jaksland, R. Gani, Energy Efficiency in High Purity Cyclohexane Production, Chemical Engineering Research and Design, 1998, 76, 3, 368

    CrossRef

  72. 72
    E.C. Marcoulaki, A.C. Kokossis, Molecular design synthesis using stochastic optimisation as a tool for scoping and screening, Computers & Chemical Engineering, 1998, 22, S11

    CrossRef

  73. 73
    V.Shankar Raman, Costas D. Maranas, Optimization in product design with properties correlated with topological indices, Computers & Chemical Engineering, 1998, 22, 6, 747

    CrossRef

  74. 74
    A.A. Hamad, M.M. El-Halwagi, Simultaneous Synthesis of Mass Separating Agents and Interception Networks, Chemical Engineering Research and Design, 1998, 76, 3, 376

    CrossRef

  75. 75
    A.-H. Meniai, D.M.T. Newsham, B. Khalfaoui, Solvent Design for Liquid Extraction Using Calculated Molecular Interaction Parameters, Chemical Engineering Research and Design, 1998, 76, 8, 942

    CrossRef

  76. 76
    A. Buxton, A.G. Livingston, E.N. Pistikopoulos, Reaction path synthesis for environmental impact minimization, Computers & Chemical Engineering, 1997, 21, S959

    CrossRef

  77. 77
    L. Constantinou, K. Bagherpour, R. Gani, J.A. Klein, D.T. Wu, Computer aided product design: problem formulations, methodology and applications, Computers & Chemical Engineering, 1996, 20, 6-7, 685

    CrossRef

  78. 78
    Ajay Modi, João Paulo Aumond, Michael Mavrovouniotis, George Stephanopoulos, Rapid plant-wide screening of solvents for batch processes, Computers & Chemical Engineering, 1996, 20, S375

    CrossRef

  79. 79
    V. VENKATASUBRAMANIAN, A. SUNDARAM, K. CHAN, J.M. CARUTHERS, Genetic Algorithms in Molecular Modeling, 1996,

    CrossRef

  80. 80
    M. Kernen, L. L. Lee, H. Perez-Blanco, A Computer-Aided Molecular Design of Fluids That Optimize Absorption Cycle COP, Journal of Energy Resources Technology, 1995, 117, 2, 156

    CrossRef

  81. 81
    Kevin G. Joback, George Stephanopoulos, Intelligent Systems in Process Engineering Part I: Paradigms from Product and Process Design, 1995,

    CrossRef

  82. 82
    V. Venkatasubramanian, K. Chan, J.M. Caruthers, Computer-aided molecular design using genetic algorithms, Computers & Chemical Engineering, 1994, 18, 9, 833

    CrossRef

  83. 83
    R. Gani, Aa. Fredenslund, Computer aided molecular and mixture design with specified property constraints, Fluid Phase Equilibria, 1993, 82, 39

    CrossRef

  84. 84
    S. Zeck, D. Wolf, Requirements of thermodynamic data in the chemical industry, Fluid Phase Equilibria, 1993, 82, 27

    CrossRef

  85. 85
    H. Strübing, S. Konstantinidis, P. G. Karamertzanis, E. N. Pistikopoulos, A. Galindo, C. S. Adjiman, Computer-Aided Methodologies for the Design of Reaction Solvents,
  86. 86
    H. Strübing, S. Konstantinidis, P. G. Karamertzanis, E. N. Pistikopoulos, A. Galindo, C. S. Adjiman, Computer-Aided Methodologies for the Design of Reaction Solvents,
  87. 87
    Michael L. Mavrovouniotis, Design of Compounds for Physical Methods, Encyclopedia of Computational Chemistry,