SEARCH

SEARCH BY CITATION

Cited in:

CrossRef

This article has been cited by:

  1. 1
    Fernando P. Bernardo, Pedro M. Saraiva, A conceptual model for chemical product design, AIChE Journal, 2015, 61, 3
  2. 2
    Lena Jankowiak, David Méndez Sevillano, Remko M. Boom, Marcel Ottens, Edwin Zondervan, Atze Jan van der Goot, A Process Synthesis Approach for Isolation of Isoflavones from Okara, Industrial & Engineering Chemistry Research, 2015, 54, 2, 691

    CrossRef

  3. 3
    Rudy Covis, Emmanuelle Marie, Alain Durand, Christophe Baravian, Kinetics of formation of oil-in-water emulsions using in situ rheo-optical measurements, AIChE Journal, 2015, 61, 1
  4. 4
    Michele Mattei, Georgios M. Kontogeorgis, Rafiqul Gani, A comprehensive framework for surfactant selection and design for emulsion based chemical product design, Fluid Phase Equilibria, 2014, 362, 288

    CrossRef

  5. 5
    C.K.H. Lee, K.L. Choy, Y.N. Chan, A knowledge-based ingredient formulation system for chemical product development in the personal care industry, Computers & Chemical Engineering, 2014, 65, 40

    CrossRef

  6. 6
    Yin-Ning Zhou, Jin-Jin Li, Qing Zhang, Zheng-Hong Luo, A novel fluorinated polymeric product for photoreversibly switchable hydrophobic surface, AIChE Journal, 2014, 60, 12
  7. 7
    Mariano Martín, Alberto Martínez, A methodology for simultaneous process and product design in the formulated consumer products industry: The case study of the detergent business, Chemical Engineering Research and Design, 2013, 91, 5, 795

    CrossRef

  8. 8
    Weishuang Ni, Songping Wu, Qun Ren, Silanized TiO2 nanoparticles and their application in toner as charge control agents: Preparation and characterization, Chemical Engineering Journal, 2013, 214, 272

    CrossRef

  9. 9
    Mariano Martín, Alberto Martínez, 23rd European Symposium on Computer Aided Process Engineering, 2013,

    CrossRef

  10. 10
    Elisa Conte, Rafiqul Gani, Yuen S. Cheng, Ka M. Ng, Design of formulated products: Experimental component, AIChE Journal, 2012, 58, 1
  11. 11
    F Picchioni, AA Broekhuis, Material properties and processing in chemical product design, Current Opinion in Chemical Engineering, 2012, 1, 4, 459

    CrossRef

  12. 12
    Peter M.M. Bongers, Cristhian Almeida-Rivera, 11th International Symposium on Process Systems Engineering, 2012,

    CrossRef

  13. 13
    Michele Mattei, Georgios M. Kontogeorgis, Rafiqul Gani, 11th International Symposium on Process Systems Engineering, 2012,

    CrossRef

  14. 14
    Elisa Conte, Rafiqul Gani, Ka Ming Ng, Design of formulated products: A systematic methodology, AIChE Journal, 2011, 57, 9
  15. 15
    Beverly V. Smith, Marianthi G. Ierapepritou, Integrative chemical product design strategies: Reflecting industry trends and challenges, Computers & Chemical Engineering, 2010, 34, 6, 857

    CrossRef

  16. 16
    Yuen S. Cheng, Ka W. Lam, Ka M. Ng, Robert K.M. Ko, Christianto Wibowo, An integrative approach to product development—A skin-care cream, Computers & Chemical Engineering, 2009, 33, 5, 1097

    CrossRef

  17. 17
    Michael Hill, Chemical Product Engineering—The third paradigm, Computers & Chemical Engineering, 2009, 33, 5, 947

    CrossRef

  18. 18
    Jean-Claude Charpentier, Perspective on multiscale methodology for product design and engineering, Computers & Chemical Engineering, 2009, 33, 5, 936

    CrossRef

  19. 19
    Peter M.M. Bongers, Cristhian Almeida-Rivera, 19th European Symposium on Computer Aided Process Engineering, 2009,

    CrossRef

  20. 20
    Michael Hill, 18th European Symposium on Computer Aided Process Engineering, 2008,

    CrossRef

  21. 21
    Ka Ming Ng, Rafiqul Gani, Kim Dam-Johansen, Chemical Product Design: Toward a Perspective Through Case Studies, 2007,

    CrossRef

  22. 22
    Ho-Ki Fung, Christianto Wibowo, Ka M. Ng, Chemical Product Design: Toward a Perspective Through Case Studies, 2007,

    CrossRef

  23. You have free access to this content23
    R. Costa, G. D. Moggridge, P. M. Saraiva, Chemical product engineering: An emerging paradigm within chemical engineering, AIChE Journal, 2006, 52, 6
  24. 24
    R. Costa, P.M. Saraiva, P. Elliott, D.C. Aldridge, G.D. Moggridge, 16th European Symposium on Computer Aided Process Engineering and 9th International Symposium on Process Systems Engineering, 2006,

    CrossRef

  25. 25
    Fernando P. Bernardo, Pedro M. Saraiva, Sérgio Simões, 16th European Symposium on Computer Aided Process Engineering and 9th International Symposium on Process Systems Engineering, 2006,

    CrossRef

  26. 26
    Ka M. Ng, Jinghai Li, Mooson Kwauk, Process engineering research in China: A multiscale, market-driven approach, AIChE Journal, 2005, 51, 10
  27. 27
    Alexander Mitsos, Michael M. Hencke, Paul I. Barton, Product engineering for man-portable power generation based on fuel cells, AIChE Journal, 2005, 51, 8
  28. 28
    Fernando P. Bernardo, Pedro M. Saraiva, European Symposium on Computer-Aided Process Engineering-15, 38th European Symposium of the Working Party on Computer Aided Process Engineering, 2005,

    CrossRef

  29. 29
    P.M. Saraiva, R. Costa, A Chemical Product Design Course with a Quality Focus, Chemical Engineering Research and Design, 2004, 82, 11, 1474

    CrossRef

  30. 30
    B. Harjo, C. Wibowo, K.M. Ng, Development of Natural Product Manufacturing Processes, Chemical Engineering Research and Design, 2004, 82, 8, 1010

    CrossRef

  31. 31
    J.C. Charpentier, T.F. McKenna, Managing complex systems: some trends for the future of chemical and process engineering, Chemical Engineering Science, 2004, 59, 8-9, 1617

    CrossRef

  32. 32
    Ka M. Ng, MOPSD: a framework linking business decision-making to product and process design, Computers & Chemical Engineering, 2004, 29, 1, 51

    CrossRef

  33. 33
    Michael Hill, Product and process design for structured products, AIChE Journal, 2004, 50, 8
  34. 34
    Fernando P. Bernardo, Pedro M. Saraiva, European Symposium on Computer-Aided Process Engineering-14, 37th European Symposium of the Working Party on Computer-Aided Process Engineering, 2004,

    CrossRef

  35. 35
    Ka Ming Ng, Christianto Wibowo, Beyond process design: The emergence of a process development focus, Korean Journal of Chemical Engineering, 2003, 20, 5, 791

    CrossRef

  36. 36
    Ka Y. Fung, Ka M. Ng, Product-centered processing: Pharmaceutical tablets and capsules, AIChE Journal, 2003, 49, 5
  37. 37
    Warren D. Seider, J.D. Seader, Daniel R. Lewin, Process Systems Engineering 2003, 8th International Symposium on Process Systems Engineering, 2003,

    CrossRef

  38. 38
    Ka M. Ng, Process Systems Engineering 2003, 8th International Symposium on Process Systems Engineering, 2003,

    CrossRef

  39. 39
    Christianto Wibowo, Lionel O'Young, Ka M. Ng, Process Systems Engineering 2003, 8th International Symposium on Process Systems Engineering, 2003,

    CrossRef

  40. 40
    R. Costa, R. G. Gabriel, P. M. Saraiva, E. Cussler, G. D. Moggridge, Chemical Product Design and Engineering, Kirk-Othmer Encyclopedia of Chemical Technology,
  41. 41
    Research and Technology Directions,