AIChE Journal

Copyright © 2012 American Institute of Chemical Engineers

Cover image for Vol. 58 Issue 3

March 2012

Volume 58, Issue 3

Pages 658–983

  1. Perspective

    1. Top of page
    2. Perspective
    3. Fluid Mechanics and Transport Phenomena
    4. Particle Technology and Fluidization
    5. Separations
    6. Process Systems Engineering
    7. Reactors, Kinetics, and Catalysis
    8. Thermodynamics
    9. Environmental and Energy Engineering
    1. Challenges and opportunities in engineered retrofits of buildings for improved energy efficiency and habitability (pages 658–667)

      Henry C. Foley

      Article first published online: 31 JAN 2012 | DOI: 10.1002/aic.13748

  2. Fluid Mechanics and Transport Phenomena

    1. Top of page
    2. Perspective
    3. Fluid Mechanics and Transport Phenomena
    4. Particle Technology and Fluidization
    5. Separations
    6. Process Systems Engineering
    7. Reactors, Kinetics, and Catalysis
    8. Thermodynamics
    9. Environmental and Energy Engineering
    1. An experimental investigation of nucleate pool boiling in aqueous solutions of a polymer (pages 668–677)

      A. D. Athavale, R. M. Manglik and M. A. Jog

      Article first published online: 5 APR 2011 | DOI: 10.1002/aic.12616

    2. Nonbuoyancy density-driven convective mass and heat transfer: Scaling analysis and solution methodology (pages 678–689)

      William B. Krantz, Hanyong Lee, Siladitya Ray Chaudhuri and Sun-Tak Hwang

      Article first published online: 28 JUN 2011 | DOI: 10.1002/aic.12631

  3. Particle Technology and Fluidization

    1. Top of page
    2. Perspective
    3. Fluid Mechanics and Transport Phenomena
    4. Particle Technology and Fluidization
    5. Separations
    6. Process Systems Engineering
    7. Reactors, Kinetics, and Catalysis
    8. Thermodynamics
    9. Environmental and Energy Engineering
    1. A statistical method for velocity detection in moving powder beds using image analysis (pages 690–696)

      Tofan A. Willemsz, Thanh N. Tran, Martijn van der Hoeven, Ricardo Hooijmaijers, Henderik W. Frijlink, Herman Vromans and Kees van der Voort Maarschalk

      Article first published online: 22 APR 2011 | DOI: 10.1002/aic.12624

    2. Powder hydrophobicity and flow properties: Effect of feed frame design and operating parameters (pages 697–706)

      Rafael Mendez, Fernando J. Muzzio and Carlos Velazquez

      Article first published online: 27 APR 2011 | DOI: 10.1002/aic.12639

    3. Measurements and computation of low mass transfer coefficients for FCC particles with ozone decomposition reaction (pages 707–729)

      Mayank Kashyap and Dimitri Gidaspow

      Article first published online: 2 MAY 2011 | DOI: 10.1002/aic.12615

    4. Fluidization of micronic particles in a conical fluidized bed: Experimental and numerical study of static bed height effect (pages 730–744)

      Alireza Bahramian and Martin Olazar

      Article first published online: 2 MAY 2011 | DOI: 10.1002/aic.12621

    5. Quantifying lateral solids mixing in a fluidized bed by modeling the thermal tracing method (pages 745–755)

      Daoyin Liu and Xiaoping Chen

      Article first published online: 6 MAY 2011 | DOI: 10.1002/aic.12627

    6. A CFD study of gas–solid jet in a CFB riser flow (pages 756–769)

      Tingwen Li and Chris Guenther

      Article first published online: 16 MAY 2011 | DOI: 10.1002/aic.12619

  4. Separations

    1. Top of page
    2. Perspective
    3. Fluid Mechanics and Transport Phenomena
    4. Particle Technology and Fluidization
    5. Separations
    6. Process Systems Engineering
    7. Reactors, Kinetics, and Catalysis
    8. Thermodynamics
    9. Environmental and Energy Engineering
    1. Developing thin-film-composite forward osmosis membranes on the PES/SPSf substrate through interfacial polymerization (pages 770–781)

      Kai Yu Wang, Tai-Shung Chung and Gary Amy

      Article first published online: 22 APR 2011 | DOI: 10.1002/aic.12635

    2. Experimental and theoretical study of methane adsorption on granular activated carbons (pages 782–788)

      Yuguo Wang, Cemal Ercan, Anwar Khawajah and Rashid Othman

      Article first published online: 27 APR 2011 | DOI: 10.1002/aic.12611

  5. Process Systems Engineering

    1. Top of page
    2. Perspective
    3. Fluid Mechanics and Transport Phenomena
    4. Particle Technology and Fluidization
    5. Separations
    6. Process Systems Engineering
    7. Reactors, Kinetics, and Catalysis
    8. Thermodynamics
    9. Environmental and Energy Engineering
    1. Hybrid time slots sequencing model for a class of scheduling problems (pages 789–800)

      Pedro M. Castro, Luis J. Zeballos and Carlos A. Méndez

      Article first published online: 31 MAR 2011 | DOI: 10.1002/aic.12609

    2. A linear model predictive control algorithm for nonlinear large-scale distributed parameter systems (pages 801–811)

      Ioannis Bonis, Weiguo Xie and Constantinos Theodoropoulos

      Article first published online: 2 MAY 2011 | DOI: 10.1002/aic.12626

    3. You have free access to this content
      Dynamic risk analysis using alarm databases to improve process safety and product quality: Part I—Data compaction (pages 812–825)

      Ankur Pariyani, Warren D. Seider, Ulku G. Oktem and Masoud Soroush

      Article first published online: 16 MAY 2011 | DOI: 10.1002/aic.12643

    4. You have free access to this content
      Dynamic risk analysis using alarm databases to improve process safety and product quality: Part II—Bayesian analysis (pages 826–841)

      Ankur Pariyani, Warren D. Seider, Ulku G. Oktem and Masoud Soroush

      Article first published online: 23 MAY 2011 | DOI: 10.1002/aic.12642

    5. Automatic differentiation-based quadrature method of moments for solving population balance equations (pages 842–854)

      Vinay Kariwala, Yi Cao and Zoltan K. Nagy

      Article first published online: 18 MAY 2011 | DOI: 10.1002/aic.12613

    6. Economic model predictive control of nonlinear process systems using Lyapunov techniques (pages 855–870)

      Mohsen Heidarinejad, Jinfeng Liu and Panagiotis D. Christofides

      Article first published online: 31 MAY 2011 | DOI: 10.1002/aic.12672

    7. Capacity expansion planning through augmented Lagrangian optimization and scenario decomposition (pages 871–883)

      Zukui Li and Marianthi G. Ierapetritou

      Article first published online: 16 JUN 2011 | DOI: 10.1002/aic.12614

    8. Multilevel strategies for the retrofit of large-scale industrial water system: A brewery case study (pages 884–898)

      Hella Tokos, Zorka Novak Pintarič, Yongrong Yang and Zdravko Kravanja

      Article first published online: 20 JUN 2011 | DOI: 10.1002/aic.12618

  6. Reactors, Kinetics, and Catalysis

    1. Top of page
    2. Perspective
    3. Fluid Mechanics and Transport Phenomena
    4. Particle Technology and Fluidization
    5. Separations
    6. Process Systems Engineering
    7. Reactors, Kinetics, and Catalysis
    8. Thermodynamics
    9. Environmental and Energy Engineering
    1. Temperature wave-trains of periodically forced networks of catalytic reactors (pages 899–913)

      Pietro Altimari, Erasmo Mancusi, Lucia Russo and Silvestro Crescitelli

      Article first published online: 22 MAR 2011 | DOI: 10.1002/aic.12601

    2. Kinetic analysis for crystal growth rate of NH4Cl in the NaCl-MgCl2-H2O system with a thermodynamic approach (pages 914–924)

      Daoguang Wang and Zhibao Li

      Article first published online: 28 MAR 2011 | DOI: 10.1002/aic.12604

    3. Beckmann rearrangement in a microstructured chemical system for the preparation of ε-caprolactam (pages 925–931)

      J. S. Zhang, K. Wang, Y. C. Lu and G. S. Luo

      Article first published online: 22 APR 2011 | DOI: 10.1002/aic.12612

    4. Analysis of oxide and vanadate supports for catalytic hydrogen combustion: Kinetic and mechanistic investigations (pages 932–945)

      Parag A. Deshpande, Sneha Polisetti and Giridhar Madras

      Article first published online: 22 APR 2011 | DOI: 10.1002/aic.12636

    5. Hydrokinetic optimization of commercial scale slurry bubble column reactor (pages 946–956)

      Wayne Strasser and Alan Wonders

      Article first published online: 27 APR 2011 | DOI: 10.1002/aic.12629

  7. Thermodynamics

    1. Top of page
    2. Perspective
    3. Fluid Mechanics and Transport Phenomena
    4. Particle Technology and Fluidization
    5. Separations
    6. Process Systems Engineering
    7. Reactors, Kinetics, and Catalysis
    8. Thermodynamics
    9. Environmental and Energy Engineering
    1. Pressure variation due to heat shock of CO2hydrate desserts (pages 957–966)

      T. B. Peters, J. L. Smith and J. G. Brisson

      Article first published online: 22 APR 2011 | DOI: 10.1002/aic.12634

  8. Environmental and Energy Engineering

    1. Top of page
    2. Perspective
    3. Fluid Mechanics and Transport Phenomena
    4. Particle Technology and Fluidization
    5. Separations
    6. Process Systems Engineering
    7. Reactors, Kinetics, and Catalysis
    8. Thermodynamics
    9. Environmental and Energy Engineering
    1. Permeation through CO2selective glassy polymeric membranes in the presence of hydrogen sulfide (pages 967–973)

      Colin A. Scholes, Geoff W. Stevens and Sandra E. Kentish

      Article first published online: 31 MAR 2011 | DOI: 10.1002/aic.12610

    2. 20 V stack of aqueous supercapacitors with carbon (−), titanium bipolar plates and CNT-polypyrrole composite (+) (pages 974–983)

      Xiaohang Zhou, Chuang Peng and George Z. Chen

      Article first published online: 20 JUN 2011 | DOI: 10.1002/aic.12632

SEARCH

SEARCH BY CITATION