Journal of Applied Polymer Science

Cover image for Journal of Applied Polymer Science

March 1976

Volume 20, Issue 3

Pages 573–857

  1. Articles

    1. Top of page
    2. Articles
    3. Note
    1. Corona-induced graft polymerization of ethyl acrylate onto cellulose film (pages 573–579)

      I. Sakata and D. A. I. Goring

      Article first published online: 9 MAR 2003 | DOI: 10.1002/app.1976.070200301

    2. Copolymer composition as a function of molecular weight and the effect of conversion on this relationship (pages 581–589)

      Francis M. Mirabella Jr., Edward M. Barrall II, Edmund F. Jordan Jr. and Julian F. Johnson

      Article first published online: 9 MAR 2003 | DOI: 10.1002/app.1976.070200302

    3. An infrared technique for the quick analysis of cotton–polyester blends (pages 591–595)

      P. Bhama Iyer, K. R. Krishna Iyer and N. B. Patil

      Article first published online: 9 MAR 2003 | DOI: 10.1002/app.1976.070200303

    4. The effect of competitive adsorption on the rate of diffusion (pages 597–607)

      David F. Hemming, John D. Collins and Arved Datyner

      Article first published online: 9 MAR 2003 | DOI: 10.1002/app.1976.070200304

    5. Solute diffusion through swollen polymer membranes (pages 609–625)

      D. R. Paul, M. Garcin and W. E. Garmon

      Article first published online: 9 MAR 2003 | DOI: 10.1002/app.1976.070200305

    6. Modification of poly(vinyl alcohol) fibers by hexamethylene diisocyanate (pages 681–688)

      D. S. Varma and Chandran Nedungadi

      Article first published online: 9 MAR 2003 | DOI: 10.1002/app.1976.070200310

    7. The effect of red phosphorus on the flammability of poly(ethylene terephthalate) (pages 689–701)

      A. Granzow and J. F. Cannelongo

      Article first published online: 9 MAR 2003 | DOI: 10.1002/app.1976.070200311

    8. Effect of styrene grafting on diffusion and solubility of gases in polyethylene (pages 703–714)

      Keio Toi, Kiyoshi Igarashi and Taneki Takuda

      Article first published online: 9 MAR 2003 | DOI: 10.1002/app.1976.070200312

    9. Preparation and properties of fibers from a crystalline polymethacrylonitrile (pages 715–731)

      Masahiko Miyanoki and Yasushi Joh

      Article first published online: 9 MAR 2003 | DOI: 10.1002/app.1976.070200313

    10. Radiation protection of poly(vinyl chloride) by N,N-dialkyl dithiocarbamate substitution (pages 753–763)

      Tsutomu Nakagawa and Yukihiko Fujiwara

      Article first published online: 9 MAR 2003 | DOI: 10.1002/app.1976.070200316

    11. Permeabilities to salts and water of macrocyclic polyether–polyamide membranes (pages 773–788)

      Ehud Shchori and Joseph Jagur-Grodzinski

      Article first published online: 9 MAR 2003 | DOI: 10.1002/app.1976.070200318

    12. Ultrahigh molecular weight polyethylene as used in articular prostheses (a molecular weight distribution study) (pages 809–812)

      Aldo M. Crugnola, Eric L. Radin, Robert M. Rose, Igor L. Paul, Sheldon R. Simon and Mark B. Berry

      Article first published online: 9 MAR 2003 | DOI: 10.1002/app.1976.070200321

    13. Effect of orientation of two-dimensional filler on dynamic mechanical properties of cured epoxy resin (pages 813–823)

      Katsuyoshi Iisaka and Kyoichi Shibayama

      Article first published online: 9 MAR 2003 | DOI: 10.1002/app.1976.070200322

    14. Dynamic mechanical behavior of poly(2-hydroxyethyl methacrylate)–glass beads composites (pages 841–851)

      J. Kolařík, J. Janáček and L. Nicolais

      Article first published online: 9 MAR 2003 | DOI: 10.1002/app.1976.070200325

  2. Note

    1. Top of page
    2. Articles
    3. Note
    1. You have free access to this content

SEARCH

SEARCH BY CITATION