Journal of Applied Polymer Science

Cover image for Journal of Applied Polymer Science

20 July 1989

Volume 38, Issue 2

Pages 207–382

  1. Articles

    1. Top of page
    2. Articles
    1. Decrystallization and acetylation and benzoylation of cotton fibers (pages 207–218)

      V. Subramaniam and N. Vasugi

      Article first published online: 9 MAR 2003 | DOI: 10.1002/app.1989.070380201

    2. Permeation and diffusion of environmental pollutants through flexible polymers (pages 227–236)

      Larry N. Britton, R. Brian Ashman, Tejraj M. Aminabhavi and Patrick E. Cassidy

      Article first published online: 9 MAR 2003 | DOI: 10.1002/app.1989.070380203

    3. Influence of the catalyst on the kinetics of a RIM formulation (pages 237–248)

      J. M. Rego, M. A. Pastor, J. J. Campo and Issa Katime

      Article first published online: 9 MAR 2003 | DOI: 10.1002/app.1989.070380204

    4. Melting behavior of cis-polybutadiene crystallized under stress (pages 249–256)

      F. De Candia and G. Romano

      Article first published online: 9 MAR 2003 | DOI: 10.1002/app.1989.070380205

    5. Functionalized polymers derived from the reaction of polymaleic anhydride with amines and alcohols (pages 257–264)

      D. Tsiourvas, C. M. Paleos and Photis Dais

      Article first published online: 9 MAR 2003 | DOI: 10.1002/app.1989.070380206

    6. Effect of comonomers on thermal degradation of polyacrylonitrile (pages 265–270)

      D. C. Gupta, J. P. Agrawal and R. C. Sharma

      Article first published online: 9 MAR 2003 | DOI: 10.1002/app.1989.070380207

    7. Mechanical behavior of closed cell plastic foams used as cushioning materials (pages 281–290)

      J. Miltz, O. Ramon and S. Mizrahi

      Article first published online: 9 MAR 2003 | DOI: 10.1002/app.1989.070380209

    8. Hydrolysis of cationic polyacrylamides (pages 297–304)

      Rein Aksberg and Lars Wågberg

      Article first published online: 9 MAR 2003 | DOI: 10.1002/app.1989.070380211

    9. Water sorption in polyamide–imide films and its effect on dielectric loss (pages 305–312)

      T. Tchangai, Y. Segui and K. Doukkali

      Article first published online: 9 MAR 2003 | DOI: 10.1002/app.1989.070380212

    10. Preparation of ion-exchange celluloses. I. Anion exchange celluloses (pages 313–322)

      M. I. Khalil, A. Wally, A. Kantouch and M. H. Abo-Shosha

      Article first published online: 9 MAR 2003 | DOI: 10.1002/app.1989.070380213

    11. The thermal stability of poly(aryl-ether–ether-ketone) as assessed by thermogravimetry (pages 323–337)

      M. Day, J. D. Cooney and D. M. Wiles

      Article first published online: 9 MAR 2003 | DOI: 10.1002/app.1989.070380214

    12. The strain rate dependency of fracture in polyethylene: Fracture initiation (pages 339–350)

      D. B. Barry and O. Delatycki

      Article first published online: 9 MAR 2003 | DOI: 10.1002/app.1989.070380215

    13. Laminar and turbulent flow continuous interfacial polycondensations of nylon 66 (pages 351–357)

      Richard G. Griskey and C. A. Patel

      Article first published online: 9 MAR 2003 | DOI: 10.1002/app.1989.070380216

    14. High density polyethylene-g-maleic anhydride preparation in presence of electron donors (pages 359–371)

      Norman G. Gaylord, Rajendra Mehta, Vijay Kumar and Mohammed Tazi

      Article first published online: 9 MAR 2003 | DOI: 10.1002/app.1989.070380217

    15. Isocyanate–epoxy reactions in bulk and solution (pages 373–382)

      J. S. Senger, I. Yilgor, J. E. McGrath and R. A. Patsiga

      Article first published online: 9 MAR 2003 | DOI: 10.1002/app.1989.070380218

SEARCH

SEARCH BY CITATION