SEARCH

SEARCH BY CITATION

Cited in:

CrossRef

This article has been cited by:

  1. 1
    Leonhard Mayrhofer, Apostolos Krallis, Christof Wurnitsch, Christian Paulik, CFD Derived Results Lead to An Installation of An Overflow Technique in A Microreactor for Gas-Phase Ethene Homo Polymerization, Macromolecular Reaction Engineering, 2015, 9, 1
  2. 2
    Mohsen Najafi, Mahmoud Parvazinia, Computational Modeling of Particle Fragmentation in the Heterogeneous Olefin Polymerization, Macromolecular Theory and Simulations, 2015, 24, 1
  3. 3
    Arash Alizadeh, Montree Namkajorn, Ekasith Somsook, Timothy F. L. McKenna, Condensed Mode Cooling for Ethylene Polymerization: Part I. The Effect of Different Induced Condensing Agents on Polymerization Rate, Macromolecular Chemistry and Physics, 2015, 216, 8
  4. 4
    Marzieh Nouri, Mahmoud Parvazinia, Hassan Arabi, Effect of fragment size distribution on reaction rate and molecular weight distribution in heterogeneous olefin polymerization, Iranian Polymer Journal, 2015, 24, 6, 437

    CrossRef

  5. 5
    M.J.H. Khan, M.A. Hussain, Z. Mansourpour, N. Mostoufi, N.M. Ghasem, E.C. Abdullah, CFD simulation of fluidized bed reactors for polyolefin production – A review, Journal of Industrial and Engineering Chemistry, 2014, 20, 6, 3919

    CrossRef

  6. 6
    Montree Namkajorn, Arash Alizadeh, Ekasith Somsook, Timothy F. L. McKenna, Condensed-Mode Cooling for Ethylene Polymerization: The Influence of Inert Condensing Agent on the Polymerization Rate, Macromolecular Chemistry and Physics, 2014, 215, 9
  7. 7
    Mohsen Najafi, Mahmoud Parvazinia, Mir Hamid Reza Ghoreishy, Costas Kiparissides, Development of a 2D Single Particle Model to Analyze the Effect of Initial Particle Shape and Breakage in Olefin Polymerization, Macromolecular Reaction Engineering, 2014, 8, 1
  8. 8
    Ahmad Shamiri, M. A. Hussain, Farouq Sabri Mjalli, Mohammad Saleh Shafeeyan, Navid Mostoufi, Experimental and Modeling Analysis of Propylene Polymerization in a Pilot-Scale Fluidized Bed Reactor, Industrial & Engineering Chemistry Research, 2014, 53, 21, 8694

    CrossRef

  9. 9
    Sang Yool Lee, Kyu Yong Choi, Kinetics and Growth of Polyethylene Nanofibrils over Metallocene Catalyst Supported on Flat Silica and Spherical Nano-Silica Particles, Macromolecular Reaction Engineering, 2014, 8, 11
  10. 10
    Sumant Dwivedi, Toshiaki Taniike, Minoru Terano, Understanding the Chemical and Physical Transformations of a Ziegler–Natta Catalyst at the Initial Stage of Polymerization Kinetics: The Key Role of Alkylaluminum in the Catalyst Activation Process, Macromolecular Chemistry and Physics, 2014, 215, 18
  11. 11
    Zhou Tian, Gu Xue-Ping, Lian-Fang Feng, Hu Guo-Hua, A model for the structures of impact polypropylene copolymers produced by an atmosphere-switching polymerization process, Chemical Engineering Science, 2013, 101, 686

    CrossRef

  12. 12
    Timothy F. L. McKenna, Estevan Tioni, Maria Maddalena Ranieri, Arash Alizadeh, Christophe Boisson, Vincent Monteil, Catalytic olefin polymerisation at short times: Studies using specially adapted reactors, The Canadian Journal of Chemical Engineering, 2013, 91, 4
  13. 13
    Ahmad Shamiri, Mohamed azlan Hussain, Farouq sabri Mjalli, Navid Mostoufi, Seyedahmad Hajimolana, Dynamics and Predictive Control of Gas Phase Propylene Polymerization in Fluidized Bed Reactors, Chinese Journal of Chemical Engineering, 2013, 21, 9, 1015

    CrossRef

  14. 14
    Sangyool Lee, Sung-Kyoung Kim, Sangbok Lee, Kyu Yong Choi, Metallocene Catalyzed Ethylene Polymerization with Specially Designed Catalyst Supports and Reaction Systems, Macromolecular Symposia, 2013, 333, 1
  15. 15
    S. R. Sultan, W. J. N. Fernando, Suhairi A. Sata, Modeling and Experimental Evaluation of Single Particle Growth in Syndiotactic Polymerization of Styrene, Journal of Materials Engineering and Performance, 2013,

    CrossRef

  16. 16
    Ye-feng Zhou, Jing-dai Wang, Yong-rong Yang, Wen-qing Wu, Modeling of the Temperature Profile in an Ethylene Polymerization Fluidized-Bed Reactor in Condensed-Mode Operation, Industrial & Engineering Chemistry Research, 2013, 52, 12, 4455

    CrossRef

  17. 17
    Thomas Kröner, Michael Bartke, Sorption of Olefins in High Impact Polypropylene – Experimental Determination and Mass Transport Modeling, Macromolecular Reaction Engineering, 2013, 7, 9
  18. 18
    John T. McCoy, Randhir Rawatlal, A more efficient simulator of particle size distribution in slurry phase polyolefin systems, Computers & Chemical Engineering, 2012, 36, 68

    CrossRef

  19. 19
    S. R. Sultan, W. J. N. Fernando, Suhairi A. Sata, Combined single particle growth and population balance modeling in stereoregular polymerization of styrene, Iranian Polymer Journal, 2012, 21, 7, 423

    CrossRef

  20. 20
    Yong Kuen Ho, Ahmad Shamiri, Farouq S. Mjalli, M.A. Hussain, Control of industrial gas phase propylene polymerization in fluidized bed reactors, Journal of Process Control, 2012, 22, 6, 947

    CrossRef

  21. 21
    S. R. Sultan, W. J. N. Fernando, Suhairi A. Sata, Coupled single-particle growth and kinetics modeling for styrene polymerization over silica-supported metallocene catalyst, Journal of Mathematical Chemistry, 2012, 50, 5, 1060

    CrossRef

  22. 22
    Ahmad Shamiri, Mohd Azlan Hussain, Farouq Sabri Mjalli, Navid Mostoufi, Improved single phase modeling of propylene polymerization in a fluidized bed reactor, Computers & Chemical Engineering, 2012, 36, 35

    CrossRef

  23. 23
    Estevan Tioni, Jean Pierre Broyer, Vincent Monteil, Timothy McKenna, Influence of Reaction Conditions on Catalyst Behavior during the Early Stages of Gas Phase Ethylene Homo- and Copolymerization, Industrial & Engineering Chemistry Research, 2012, 51, 45, 14673

    CrossRef

  24. 24
    Zhou Tian, Xue-Ping Gu, Lian-Fang Feng, Jean-Pierre Corriou, Guo-Hua Hu, Modeling and simulation of polypropylene particle size distribution in industrial horizontal stirred bed reactors, Journal of Applied Polymer Science, 2012, 125, 4
  25. 25
    S. R. Sultan, W. J. N. Fernando, Suhairi A. Sata, Multiscale modeling of syndiospecific styrene polymerization, Journal of Polymer Research, 2012, 19, 3

    CrossRef

  26. 26
    Estevan Tioni, Roger Spitz, J. P. Broyer, Vincent Monteil, Timothy McKenna, Packed-bed reactor for short time gas phase olefin polymerization: Heat transfer study and reactor optimization, AIChE Journal, 2012, 58, 1
  27. 27
    Sang Yool Lee, Kyu Yong Choi, Polymerization of Ethylene overrac-Et(1-indenyl)2ZrCl2/MAO Catalyst Supported on Pseudo-Inverse Opal Silica Particles, Industrial & Engineering Chemistry Research, 2012, 51, 29, 9742

    CrossRef

  28. 28
    Fabricio Machado, Enrique Luis Lima, José Carlos Pinto, Timothy F. McKenna, An experimental study on the early stages of gas-phase olefin polymerizations using supported Ziegler–Natta and metallocene catalysts, Polymer Engineering & Science, 2011, 51, 2
  29. 29
    Wei Wang, Zu-Wei Zheng, Zheng-Hong Luo, Coupled-single-particle and Monte Carlo model for propylene polymerization, Journal of Applied Polymer Science, 2011, 119, 1
  30. 30
    Ahmad Shamiri, Mohamed Azlan Hussain, Farouq Sabri Mjalli, Navid Mostoufi, Mohammad Saleh Shafeeyan, Dynamic modeling of gas phase propylene homopolymerization in fluidized bed reactors, Chemical Engineering Science, 2011, 66, 6, 1189

    CrossRef

  31. 31
    Nichapat Senso, Piyasan Praserthdam, Bunjerd Jongsomjit, Toshiaki Taniike, Minoru Terano, Effects of Ti oxidation state on ethylene, 1-hexene comonomer polymerization by MgCl2-supported Ziegler–Natta catalysts, Polymer Bulletin, 2011, 67, 9, 1979

    CrossRef

  32. 32
    N. M. Ostrovskii, D. Stoiljković, Evaluation of the effect of reaction and mass transfer on the growth of polymer particles in olefin polymerization, Theoretical Foundations of Chemical Engineering, 2011, 45, 1, 40

    CrossRef

  33. 33
    Toshiaki Taniike, Binh Tien Nguyen, Shougo Takahashi, Thang Quoc Vu, Mitsuhiro Ikeya, Minoru Terano, Kinetic elucidation of comonomer-induced chemical and physical activation in heterogeneous ziegler-natta propylene polymerization, Journal of Polymer Science Part A: Polymer Chemistry, 2011, 49, 18
  34. 34
    Tae Young Kim, Yeong Koo Yeo, Development of polyethylene melt index inferential model, Korean Journal of Chemical Engineering, 2010, 27, 6, 1669

    CrossRef

  35. 35
    Ahmad Shamiri, Mohamed Azlan Hussain, Farouq Sabri Mjalli, Navid Mostoufi, Kinetic modeling of propylene homopolymerization in a gas-phase fluidized-bed reactor, Chemical Engineering Journal, 2010, 161, 1-2, 240

    CrossRef

  36. 36
    Zheng-Hong Luo, De-Pan Shi, Yong Zhu, Multiple active site Monte Carlo model for heterogeneous Ziegler-Natta propylene polymerization, Journal of Applied Polymer Science, 2010, 115, 5
  37. 37
    Alexandr Zubov, Lucie Pechackova, Libor Seda, Marek Bobak, Juraj Kosek, Transport and reaction in reconstructed porous polypropylene particles: Model validation, Chemical Engineering Science, 2010, 65, 7, 2361

    CrossRef

  38. 38
    Mohammad A. Dehnavi, Shahrokh Shahhosseini, S. Hassan Hashemabadi, S. Mehdi Ghafelebashi, CFD based evaluation of polymer particles heat transfer coefficient in gas phase polymerization reactors, International Communications in Heat and Mass Transfer, 2008, 35, 10, 1375

    CrossRef

  39. 39
    G. Dompazis, V. Kanellopoulos, V. Touloupides, C. Kiparissides, Development of a multi-scale, multi-phase, multi-zone dynamic model for the prediction of particle segregation in catalytic olefin polymerization FBRs, Chemical Engineering Science, 2008, 63, 19, 4735

    CrossRef

  40. 40
    Marek Bobak, Tomas Gregor, Bernd Bachman, Juraj Kosek, Estimation of Morphology Characteristics of Porous Poly(propylene) Particles from Degassing Measurements, Macromolecular Reaction Engineering, 2008, 2, 2
  41. 41
    Adriano G. Fisch, João H.Z. dos Santos, Nilo S.M. Cardozo, Argimiro R. Secchi, Mass transfer in olefin polymerization: estimative of macro- and microscale diffusion coefficients through the swollen polymer, Chemical Engineering Science, 2008, 63, 14, 3727

    CrossRef

  42. 42
    Cuiyan Tong, Yong Chen, Ye Chen, Xuequan Zhang, Decai Yang, Jingping Zhang, Mass transfer resistance in the production of high impact polypropylene, Polymer, 2008, 49, 12, 2974

    CrossRef

  43. 43
    Zheng-Hong Luo, Wei Wang, Pei-Lin Su, Modeling of the propylene polymerization catalyzed by single-/multi-active site catalyst: A Monte Carlo study, Journal of Applied Polymer Science, 2008, 110, 6
  44. 44
    A. Alexiadis, C. Andes, Revised particle growth model for supported metallocene catalyst co-polymerization, Applied Mathematical Modelling, 2008, 32, 1, 99

    CrossRef

  45. 45
    Xiao Wei Yan, Xiao Hong Ren, Siegfried Stapf, Jing Dai Wang, Yong Rong Yang, Self-diffusion coefficients of organic solvents in linear and branched high density polyethylene particles measured by PFG NMR, Chinese Chemical Letters, 2008, 19, 1, 110

    CrossRef

  46. 46
    Libor Seda, Alexandr Zubov, Marek Bobak, Juraj Kosek, Apostolos Kantzas, Transport and Reaction Characteristics of Reconstructed Polyolefin Particles, Macromolecular Reaction Engineering, 2008, 2, 6
  47. 47
    Duncan E. Thompson, Kim B. McAuley, P. James McLellan, A Simplified Model for Prediction of Molecular Weight Distributions in Ethylene-Hexene Copolymerization Using Ziegler-Natta Catalysts, Macromolecular Reaction Engineering, 2007, 1, 5
  48. 48
    A. Gonzalez, S. Eceolaza, A. Etxeberria, J. J. Iruin, Diffusivity of ethylene and propylene in atactic and isotactic polypropylene: Morphology effects and free-volume simulations, Journal of Applied Polymer Science, 2007, 104, 6
  49. 49
    Ahmad Mirzaei, Ali Kiashemshaki, Mehrsa Emami, Fluidized Bed Polyethylene Reactor Modeling in Condensed Mode Operation, Macromolecular Symposia, 2007, 259, 1
  50. 50
    Audrey Di Martino, Günter Weickert, François Sidoroff, Timothy F. L. McKenna, Modelling Induced Tension in a Growing Catalyst/Polyolefin Particle: A Multi-Scale Approach for Simplified Morphology Modelling, Macromolecular Reaction Engineering, 2007, 1, 3
  51. 51
    Hassan Hammawa, Sieghard E Wanke, Gas-phase olefin polymerization over supported metallocene/MAO catalysts: influence of support on activity and polydispersity, Polymer International, 2006, 55, 4
  52. 52
    Ali Kiashemshaki, Navid Mostoufi, Rahmat Sotudeh-Gharebagh, Two-phase modeling of a gas phase polyethylene fluidized bed reactor, Chemical Engineering Science, 2006, 61, 12, 3997

    CrossRef

  53. 53
    Kyu Yong Choi, New Developments and Application in Chemical Reaction Engineering, 2006,

    CrossRef

  54. 54
    Georgios Dompazis, Vassileios Kanellopoulos, Costas Kiparissides, A Multi-Scale Modeling Approach for the Prediction of Molecular and Morphological Properties in Multi-Site Catalyst, Olefin Polymerization Reactors, Macromolecular Materials and Engineering, 2005, 290, 6
  55. 55
    Cristiano H. Fontes, Mario J Mendes, Analysis of an industrial continuous slurry reactor for ethylene–butene copolymerization, Polymer, 2005, 46, 9, 2922

    CrossRef

  56. 56
    Yuan Chen, Xinggao Liu, Modeling mass transport of propylene polymerization on Ziegler–Natta catalyst, Polymer, 2005, 46, 22, 9434

    CrossRef

  57. 57
    Zdeněk Grof, Juraj Kosek, Miloš Marek, Modeling of morphogenesis of growing polyolefin particles, AIChE Journal, 2005, 51, 7
  58. 58
    Mario G. Chiovetta, Diana A. Estenoz, Behavior of Active Sites in a Changing, Supported Metallocene Catalyst Particle: Modeling Monomer Transport and Kinetics, Macromolecular Materials and Engineering, 2004, 289, 11
  59. 59
    H. Hammawa, T. M. Mannan, D. T. Lynch, S. E. Wanke, Effects of aluminum alkyls on ethylene/1-hexene polymerization with supported metallocene/MAO catalysts in the gas phase, Journal of Applied Polymer Science, 2004, 92, 6
  60. 60
    B.F. Abu-Sharkh, Influence of tacticity on solubility of propene monomer in isotactic and syndiotactic polypropylene, Polymer, 2004, 45, 18, 6383

    CrossRef

  61. 61
    Mahmood Alizadeh, Navid Mostoufi, Saeed Pourmahdian, Rahmat Sotudeh-Gharebagh, Modeling of fluidized bed reactor of ethylene polymerization, Chemical Engineering Journal, 2004, 97, 1, 27

    CrossRef

  62. 62
    Pål Kittilsen, Hallvard F. Svendsen, Three-level mass-transfer model for the heterogeneous polymerization of olefins, Journal of Applied Polymer Science, 2004, 91, 4
  63. 63
    C. Huo, X. H. Ren, B. P. Liu, Y. R. Yang, S. X. Rong, Fractal approach for modeling the morphology evolution of olefin polymerization with heterogeneous catalysts, Journal of Applied Polymer Science, 2003, 90, 6
  64. 64
    M. Bartke, A. Wartmann, K.-H. Reichert, Gas-phase polymerization of butadiene. Data acquisition using minireactor technology and particle modeling, Journal of Applied Polymer Science, 2003, 87, 2
  65. 65
    Masayuki Horio, Noriyuki Furukawa, Hidehiro Kamiya, Yasunobu Kaneko, Measurement of Stress–Deformation Characteristics for a Polypropylene Particle of Fluidized Bed Polymerization for DEM Simulation, Polymer Reaction Engineering, 2003, 11, 2, 203

    CrossRef

  66. 66
    Zdeněk Grof, Juraj Kosek, Miloš Marek, Pierre M. Adler, Modeling of morphogenesis of polyolefin particles: Catalyst fragmentation, AIChE Journal, 2003, 49, 4
  67. 67
    Douglas M. Merquior, Enrique L. Lima, José Carlos Pinto, Modeling of Particle Fragmentation in Heterogeneous Olefin Polymerization Reactions, Polymer Reaction Engineering, 2003, 11, 2, 133

    CrossRef

  68. 68
    Jochem T. M. Pater, Günter Weickert, Wim P. M. van Swaaij, Optical and infrared imaging of growing polyolefin particles, AIChE Journal, 2003, 49, 2
  69. 69
    Jochem T. M. Pater, Günter Weickert, Wim P. M. Van Swaaij, Polymerization of liquid propylene with a fourth-generation Ziegler–Natta catalyst: Influence of temperature, hydrogen, monomer concentration, and prepolymerization method on powder morphology, Journal of Applied Polymer Science, 2003, 87, 9
  70. 70
    Pål Kittilsen, Hallvard F. Svendsen, Timothy F. McKenna, Viscoelastic model for particle fragmentation in olefin polymerization, AIChE Journal, 2003, 49, 6
  71. 71
    G. B. Meier, G. Weickert, W. P. M. van Swaaij, FBR for catalytic propylene polymerization: Controlled mixing and reactor modeling, AIChE Journal, 2002, 48, 6
  72. 72
    Fabiano A.N. Fernandes, Liliane M.F. Lona, Heterogeneous modeling of fluidized bed polymerization reactors. Influence of mass diffusion into the polymer particle, Computers & Chemical Engineering, 2002, 26, 6, 841

    CrossRef

  73. 73
    U. Parasu Veera, G. Weickert, U. S. Agarwal, Modeling monomer transport by convection during olefin polymerization, AIChE Journal, 2002, 48, 5
  74. 74
    Virginie Mattioli, Benoit Découvelaere, Timothy F. McKenna, STUDY OF CAPILLARY EFFECTS DURING OLEFIN POLYMERISATION ON SUPPORTED CATALYSTS, Polymer Reaction Engineering, 2002, 10, 3, 163

    CrossRef

  75. 75
    Kyoung-Su Ha, Hyun-Ku Rhee, A continuum approach for the active sites in a Ziegler–Natta catalytic system, Chemical Engineering Science, 2001, 56, 3, 905

    CrossRef

  76. 76
    J. Kosek, Z. Grof, A. ák, F. Štěpánek, M. Marek, Dynamics of particle growth and overheating in gas-phase polymerization reactors, Chemical Engineering Science, 2001, 56, 13, 3951

    CrossRef

  77. 77
    Fabiano André Narciso Fernandes, Liliane Maria Ferrareso Lona, Fluidized-bed reactor modeling for polyethylene production, Journal of Applied Polymer Science, 2001, 81, 2
  78. 78
    Knut Zoellner, Karl-Heinz Reichert, Gas phase polymerization of butadiene—kinetics, particle size distribution, modeling, Chemical Engineering Science, 2001, 56, 13, 4099

    CrossRef

  79. 79
    G. B. Meier, G. Weickert, W. P. M. Van Swaaij, Gas-phase polymerization of propylene: Reaction kinetics and molecular weight distribution, Journal of Polymer Science Part A: Polymer Chemistry, 2001, 39, 4
  80. 80
    S. Chakravarti, W. Harmon Ray, Kinetic study of olefin polymerization with a supported metallocene catalyst. III. Ethylene homopolymerization in slurry, Journal of Applied Polymer Science, 2001, 81, 12
  81. 81
    Kyoung-Su Ha, Kee-Youn Yoo, Hyun-Ku Rhee, Modeling and analysis of a slurry reactor system for heterogeneous olefin polymerization: The effects of hydrogen concentration and initial catalyst size, Journal of Applied Polymer Science, 2001, 79, 13
  82. 82
    Junzi Zhao, Jianzhong Sun, Qiyun Zhou, Zuren Pan, Modeling of particle growth and morphology in the gas phase polymerization of butadiene. I. Model and its solution method, Journal of Applied Polymer Science, 2001, 81, 3
  83. 83
    Junzi Zhao, Jianzhong Sun, Qiyun Zhou, Zuren Pan, Modeling of particle growth and morphology in the gas phase polymerization of butadiene. II. Simulation and discussion, Journal of Applied Polymer Science, 2001, 81, 3
  84. 84
    Pål Kittilsen, Hallvard Svendsen, Timothy F. McKenna, Modeling of transfer phenomena on heterogeneous Ziegler catalysts. IV. Convection effects in gas phase processes, Chemical Engineering Science, 2001, 56, 13, 3997

    CrossRef

  85. 85
    Diana A. Estenoz, Mario G. Chiovetta, Olefin polymerization using supported metallocene catalysts: Process representation scheme and mathematical model, Journal of Applied Polymer Science, 2001, 81, 2
  86. 86
    S. D. Naik, W. H. Ray, Particle morphology for polyolefins synthesized with supported metallocene catalysts, Journal of Applied Polymer Science, 2001, 79, 14
  87. 87
    J.J. Zacca, J.A. Debling, Particle population overheating phenomena in olefin polymerization reactors, Chemical Engineering Science, 2001, 56, 13, 4029

    CrossRef

  88. 88
    P. G. Belelli, M. L. Ferreira, M. H. Lacunza, D. E. Damiani, A. Brandolin, Propylene polymerization in a semibatch reactor. Analysis of soluble metallocene catalyst behavior through reactor modeling, Polymer Engineering & Science, 2001, 41, 12
  89. 89
    Timothy F. McKenna, João B.P. Soares, Single particle modelling for olefin polymerization on supported catalysts: A review and proposals for future developments, Chemical Engineering Science, 2001, 56, 13, 3931

    CrossRef

  90. 90
    Yoshiyuki Sato, Masashi Yurugi, Takafumi Yamabiki, Shigeki Takishima, Hirokatsu Masuoka, Solubility of propylene in semicrystalline polypropylene, Journal of Applied Polymer Science, 2001, 79, 6
  91. 91
    A.G. Mattos Neto, J.C. Pinto, Steady-state modeling of slurry and bulk propylene polymerizations, Chemical Engineering Science, 2001, 56, 13, 4043

    CrossRef

  92. 92
    P. Kittilsen, T. F. McKenna, Study of the kinetics, mass transfer, and particle morphology in the production of high-impact polypropylene, Journal of Applied Polymer Science, 2001, 82, 5
  93. 93
    Pål Kittilsen, Timothy F. McKenna, Hallvard Svendsen, Hugo A. Jakobsen, Siw B. Fredriksen, The interaction between mass transfer effects and morphology in heterogeneous olefin polymerization, Chemical Engineering Science, 2001, 56, 13, 4015

    CrossRef

  94. 94
    G. Luft, A. Laurent, F. Recasens, F. Trabelsi, G. Weickert, High Pressure Process Technology: Fundamentals and Applications, 2001,

    CrossRef

  95. 95
    Zhiquan Shen, Weishi Li, Yifeng Zhang, Kinetic model of gas phase polymerization of 1,3-butadiene catalyzed by supported rare earth coordination system, Science in China Series B: Chemistry, 2000, 43, 5, 477

    CrossRef

  96. 96
    Yoshiyuki Sato, Akio Tsuboi, Atsushi Sorakubo, Shigeki Takishima, Hirokatsu Masuoka, Takeshi Ishikawa, Vapor–liquid equilibrium ratios for hexane at infinite dilution in ethylene+impact polypropylene copolymer and propylene+impact polypropylene copolymer, Fluid Phase Equilibria, 2000, 170, 1, 49

    CrossRef

  97. 97
    Yasunobu Kaneko, Takeo Shiojima, Masayuki Horio, DEM simulation of fluidized beds for gas-phase olefin polymerization, Chemical Engineering Science, 1999, 54, 24, 5809

    CrossRef

  98. 98
    Timothy F. McKenna, Roger Spitz, Davor Cokljat, Heat transfer from catalysts with computational fluid dynamics, AIChE Journal, 1999, 45, 11
  99. 99
    T.F. McKenna, D. Cokljat, R. Spitz, D. Schweich, Modelling of heat and mass transfer during the polymerisation of olefins on heterogeneous Ziegler catalysts, Catalysis Today, 1999, 48, 1-4, 101

    CrossRef

  100. 100
    H. Hatzantonis, A. Goulas, C. Kiparissides, A comprehensive model for the prediction of particle-size distribution in catalyzed olefin polymerization fluidized-bed reactors, Chemical Engineering Science, 1998, 53, 18, 3251

    CrossRef

  101. 101
    T.F. McKenna, D. Cokljat, P. Wild, CFD Modelling of heat transfer during gas phase olefin polymerisation, Computers & Chemical Engineering, 1998, 22, S285

    CrossRef

  102. 102
    Jae Youn Kim, Particle size distribution and its effect on the olefin polymer reactor dynamics over olefin polymerization catalysts with multiple active sites, Korean Journal of Chemical Engineering, 1998, 15, 4, 451

    CrossRef

  103. 103
    Jae Youn Kim, W. Curt Conner, Robert L. Laurence, Particle size distribution in olefin continuous stirred-bed polymerization reactors, Korean Journal of Chemical Engineering, 1998, 15, 3, 262

    CrossRef

  104. 104
    Aatmeeyata∗, Santosh K. Gupta, Simulation and Optimization of an Industrial Nylon 6 Reactor: A Review, Polymer-Plastics Technology and Engineering, 1998, 37, 2, 201

    CrossRef

  105. 105
    Jae Youn Kim, W. Curt Conne, Robert L. Laurence, The effect of particle size distribution on the olefin polymer reactor dynamics, Korean Journal of Chemical Engineering, 1998, 15, 2, 164

    CrossRef

  106. 106
    D.Y. Khang, Hong H. Lee, Particle size distribution in fluidized beds for catalytic polymerization, Chemical Engineering Science, 1997, 52, 3, 421

    CrossRef

  107. 107
    Sang-Yun Lim, Suk-Jin Choung, Studies on the catalytic deactivation in propylene polymerization, Applied Catalysis A: General, 1997, 153, 1-2, 103

    CrossRef

  108. 108
    Diana A. Estenoz, Mario G. Chiovetta, A structural model for the catalytic polymerization of ethylene using chromium catalysts. Part I: Description and solution, Polymer Engineering & Science, 1996, 36, 17
  109. 109
    Diana A. Estenoz, Mario G. Chiovetta, A structural model for the catalytic polymerization of ethylene using chromium catalysts. Part II: Thermal effects, Polymer Engineering & Science, 1996, 36, 17
  110. 110
    M. Rätzsch, H. Bucka, A. Hesse, M. Arnold, Basis of Solid-Phase Grafting of Polypropylene, Journal of Macromolecular Science, Part A, 1996, 33, 7, 913

    CrossRef

  111. 111
    J.B.P. Soares, A.E. Hamielec, Copolymerization of Olefins in a Series of Continuous Stirred-Tank Slurry-Reactors Using Heterogeneous Ziegler-Natta and Metallocene Catalysts. I. General Dynamic Mathematical Model, Polymer Reaction Engineering, 1996, 4, 2-3, 153

    CrossRef

  112. 112
    Jorge J. Zacca, Jon A. Debling, W.H. Ray, Reactor residence time distribution effects on the multistage polymerization of olefins—I. Basic principles and illustrative examples, polypropylene, Chemical Engineering Science, 1996, 51, 21, 4859

    CrossRef

  113. 113
    Sang-Yun Lim, Suk-Jin Choung, Kyung-Ho Song, Studies on the effects of external electron donor in propylene polymerization, Korean Journal of Chemical Engineering, 1996, 13, 1, 21

    CrossRef

  114. 114
    Matthew Tirrell, Chemical engineering of polymers: Production of flexible, functional materials, Chemical Engineering Science, 1995, 50, 24, 4123

    CrossRef

  115. 115
    Jin-San Yoon, Reactivity ratios of ethylene/α-olefin in gas phase reactors, European Polymer Journal, 1995, 31, 10, 999

    CrossRef

  116. 116
    K.B. McAuley, J.P. Talbot, T.J. Harris, A comparison of two-phase and well-mixed models for fluidized-bed polyethylene reactors, Chemical Engineering Science, 1994, 49, 13, 2035

    CrossRef

  117. 117
    Jin-San Yoon, Chung-Yul Chung, In-Hyun Lee, Solubility and diffusion coefficient of gaseous ethylene and α-olefin in ethylene/α-olefin random copolymers, European Polymer Journal, 1994, 30, 11, 1209

    CrossRef

  118. 118
    John J. A. Dusseault, Cheng C. Hsu, MgCI2-Supported Ziegler-Natta Catalysts for Olefin Polymerization: Basic Structure, Mechanism, and Kinetic Behavior, Journal of Macromolecular Science, Part C: Polymer Reviews, 1993, 33, 2, 103

    CrossRef

  119. 119
    M. Sau, Santosh K. Gupta, Modelling of a semibatch polypropylene slurry reactor, Polymer, 1993, 34, 21, 4417

    CrossRef

  120. 120
    Priyabrata Sarkar, Santosh K Gupta, Simulation of propylene polymerization: an efficient algorithm, Polymer, 1992, 33, 7, 1477

    CrossRef

  121. 121
    Priyabrata Sarkar, Santosh K. Gupta, Steady state simulation of continuous-flow stirred-tank slurry propylene polymerization reactors, Polymer Engineering & Science, 1992, 32, 11
  122. 122
    P Sarkar, Santosh K Gupta, Modelling of propylene polymerization in an isothermal slurry reactor, Polymer, 1991, 32, 15, 2842

    CrossRef

  123. 123
    Steven W. Webb, E. L. Weist, M. G. Chiovetta, R. L. Laurence, W. C. Conner, Morphological influences in the gas phase polymerization of ethylene by silica supported chromium oxide catalysts, The Canadian Journal of Chemical Engineering, 1991, 69, 3
  124. 124
    A.B.M. de Carvalho, P.E. Gloor, A.E. Hamielec, A kinetic model for heterogeneous Ziegler-Natta (co)polymerization. Part 2: stereochemical sequence length distributions, Polymer, 1990, 31, 7, 1294

    CrossRef

  125. 125
    Jukka V. Seppälä, Markku Auer, Factors affecting kinetics in slurry type coordination polymerization, Progress in Polymer Science, 1990, 15, 1, 147

    CrossRef

  126. 126
    K.Y. Choi, W.H. Ray, The dynamic behavior of continuous stirred-bed reactors for the solid catalyzed gas phase polymerization of propylene, Chemical Engineering Science, 1988, 43, 10, 2587

    CrossRef

  127. 127
    João B. P. Soares, Odilia Pérez, Coordination Polymerization,
  128. 128
    Long Wu, Sieghard E. Wanke, MgCl2-Supported TiCl4 Catalysts for Production of Morphology-Controlled Polyethylene,
  129. 129
    Particle Growth and Single Particle Modeling,
  130. 130
    Archie E. Hamielec, Hidetaka Tobita, Polymerization Processes, Ullmann's Encyclopedia of Industrial Chemistry,
  131. 131
    Archie E. Hamielec, Hidetaka Tobita, Polymerization Processes, 2. Modeling of Processes and Reactors, Ullmann's Encyclopedia of Industrial Chemistry,
  132. 132
    Long Wu, Sieghard E. Wanke, Product Morphology in Olefin Polymerization with Polymer Supported Metallocene Catalysts,
  133. 133
    Richard Lieberman, Constantine Stewart, Propylene Polymers, Encyclopedia Of Polymer Science and Technology,
  134. 134
    Giuliano Cecchin, Giampiero Morini, Fabrizio Piemontesi, Ziegler-Natta Catalysts, Kirk-Othmer Encyclopedia of Chemical Technology,