Get access

Water-blown soy polyol based polyurethane foams modified by cellulosic materials obtained from different sources

Authors

  • Indranil Banik,

    Corresponding author
    1. Centre for Bio-Composites and Biomaterials Processing, 33 Willcocks Street, University of Toronto, Toronto, Ontario, Canada M5S 3B3
    • Department of Chemical and Biomolecular Engineering, University of Houston, Houston, TX 77204
    Search for more papers by this author
  • Mohini M. Sain

    1. Centre for Bio-Composites and Biomaterials Processing, 33 Willcocks Street, University of Toronto, Toronto, Ontario, Canada M5S 3B3
    Search for more papers by this author

Abstract

This article deals with the effect of cellulosic fiber from commercially available writing paper, bleached kraft pulp, and commercially available rice flour on the foaming of polyurethane based on polyol derived from soy bean oil. The presence of cellulosic materials was observed to have a notable influence on the density of the foams. Changes in the density of different foams were correlated with possible chemical structures generated in the presence of the fiber and were analyzed by Fourier transform infrared spectroscopy and thermogravimetric analysis. Furthermore, differential scanning calorimetry analysis was performed to lend support to possible changes in foaming behavior in the presence of refined fiber. Scanning electron microscopy observations were in line with the observation of structures generated in the presence of cellulosic fibers from different sources. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009

Ancillary