Get access

Crystallinity development in cellular poly(lactic acid) in the presence of supercritical carbon dioxide

Authors

  • Mihaela Mihai,

    1. National Research Council of Canada, Industrial Materials Institute, 75 de Mortagne, Boucherville, Québec, Canada J4B 6Y4
    2. CREPEC, Chemical Engineering Department, École Polytechnique de Montréal, P.O. Box 6079, Station Centre-Ville, Montréal, Québec, Canada H3C 3A7
    Search for more papers by this author
  • Michel A. Huneault,

    Corresponding author
    1. National Research Council of Canada, Industrial Materials Institute, 75 de Mortagne, Boucherville, Québec, Canada J4B 6Y4
    • National Research Council of Canada, Industrial Materials Institute, 75 de Mortagne, Boucherville, Québec, Canada J4B 6Y4
    Search for more papers by this author
  • Basil D. Favis

    1. CREPEC, Chemical Engineering Department, École Polytechnique de Montréal, P.O. Box 6079, Station Centre-Ville, Montréal, Québec, Canada H3C 3A7
    Search for more papers by this author

Abstract

This article investigates the crystallinity development in cellular poly(lactic acid) (PLA) and the effect of the achieved crystalline content on its properties and microstructure. Carbon dioxide (CO2) in its supercritical state was used as the expansion agent for three different grades of PLA that differed in terms of L-lactic acid content. Cellular PLA was produced on a twin-screw extrusion line using capillary dies of various diameters. The obtained crystalline contents were measured by differential scanning calorimetry and X-ray diffraction techniques. The morphology of the cellular structures was examined using scanning electron microscopy. The crystallinity developed on expansion depended on L-lactic acid content, on supercritical CO2 concentration, polymer flow rate, and die diameter. Cellular PLA, with densities as low as 30 kg/m3, was obtained under the most favorable conditions. It was shown that the crystallinity development in PLA enhances its cellular structure formation and enables the fabrication of quality cellular materials at lower CO2 concentration. The presence of PLA crystallites within expanded cell walls leads to a peculiar 2D-cavitation phenomena observed only in the cell walls of semicrystalline foams. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009

Ancillary