Get access

Precipitation of submicrometer-sized poly(methyl methacrylate) particles with a compressed fluid antisolvent



Submicrometer-sized poly(methyl methacrylate) (PMMA) particles were generated by precipitation with a compressed fluid antisolvent technique. The precipitation was carried out as follows. A solution containing PMMA was sprayed through a nozzle into a precipitator. The antisolvent CO2 was continuously passed through the precipitator during the operation at a flow rate of 2000 mL/min. When toluene was used as the solvent, scanning electron microscopy images showed that solid, spherical PMMA particles with less coalescence could be generated only when both vapor and liquid CO2 was present and the liquid CO2 level in the precipitator was one-eighth. The morphology and size of the precipitated PMMA were found to be dependent on the solvents. Toluene, which had the lowest solubility parameter, was the most appropriate solvent in comparison with tetrahydrofuran, acetone, and nitromethane. More uniform submicrometer-sized PMMA particles were obtained at PMMA concentrations equal to or less than 1.0 wt % in the toluene solution. A narrower particle size distribution was observed for precipitating PMMA with a molecular weight of 85,000 versus PMMA with a molecular weight of 36,000. To generate PMMA particles with less coalescence, liquid CO2 instead of supercritical CO2 was suggested for use in drying immediately after the spraying of the PMMA solution. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010

Get access to the full text of this article