Get access

Synthesis and characterization of poly(3,4-ethylenedioxythiophene) nanoparticles obtained through ultrasonic irradiation

Authors

  • Xinrui Zhong,

    1. State Key Laboratory of Polymer Materials Engineering, Polymer Research Institute, Sichuan University, Chengdu 610065, China
    Search for more papers by this author
  • Guoxia Fei,

    1. State Key Laboratory of Polymer Materials Engineering, Polymer Research Institute, Sichuan University, Chengdu 610065, China
    Search for more papers by this author
  • Hesheng Xia

    Corresponding author
    1. State Key Laboratory of Polymer Materials Engineering, Polymer Research Institute, Sichuan University, Chengdu 610065, China
    • State Key Laboratory of Polymer Materials Engineering, Polymer Research Institute, Sichuan University, Chengdu 610065, China
    Search for more papers by this author

Abstract

Poly(3,4-ethylenedioxythiophene) (PEDOT) nanoparticles with a size of 50–100 nm were prepared by the oxidation polymerization of the monomer 3,4-ethylenedioxythiophene (EDOT) under ultrasonic irradiation. The structure and morphology of PEDOT, as well as the electrical conductivity were characterized. Compared with the conventional stirring method, the PEDOT nanoparticles prepared by ultrasonic irradiation have a smaller particle size and are more uniform and spherical due to the dispersion, emulsifying and disruption effects of ultrasound. The yield of PEDOT by ultrasonic irradiation can reach ∼ 50%, and the conductivity of PEDOT is high up to 11 S/cm. A decrease in particle size due to the ultrasonication can lead to more effective doping and enhanced conductivity. The reaction time, temperature and ultrasound power output have significant effects on the field and electrical conductivity of PEDOT. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010

Get access to the full text of this article

Ancillary