Get access
Advertisement

Use of near-infrared spectroscopy for online quality analysis of Armos fiber/prepreg tape

Authors

  • B. Jiang,

    1. Polymer Materials and Engineering Department, School of Chemical Engineering and Technology, Harbin Institute of Technology, Harbin 150001, People's Republic of China
    Search for more papers by this author
  • Y. D. Huang,

    Corresponding author
    1. Polymer Materials and Engineering Department, School of Chemical Engineering and Technology, Harbin Institute of Technology, Harbin 150001, People's Republic of China
    • Polymer Materials and Engineering Department, School of Chemical Engineering and Technology, Harbin Institute of Technology, Harbin 150001, People's Republic of China
    Search for more papers by this author
  • L. Liu,

    1. Polymer Materials and Engineering Department, School of Chemical Engineering and Technology, Harbin Institute of Technology, Harbin 150001, People's Republic of China
    Search for more papers by this author
  • C. P. Hu

    1. Polymer Materials and Engineering Department, School of Chemical Engineering and Technology, Harbin Institute of Technology, Harbin 150001, People's Republic of China
    Search for more papers by this author

Abstract

Near-infrared spectroscopy (NIR) was applied in manufacture of the Armos fiber/prepreg tape. The reinforced material, resin matrix, and prepreg were analyzed by NIR spectroscopy, the qualitative and quantitative method. The volatile content and resin content of the calibration models were developed by partial least squares. The analytical result showed that, it was a rapid, nondestructive, and noncontact method for the simultaneous measurement of prepreg quality. This method enhanced the quality of prepreg. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012

Get access to the full text of this article

Ancillary