Get access

Electrical properties and the role of inhomogeneities at the polyvinyl alcohol/n-inp schottky barrier interface

Authors


ABSTRACT

In this work, we have investigated the electrical properties of Au/n-InP contacts with a thin layer of polyvinyl alcohol (PVA) as an interlayer. The current–voltage (IV) and capacitance–voltage (CV) measurements are carried out in the temperature range of 175–425 K. The Au/PVA/n-InP Schottky structure show nonideal behaviors and indicates the presence of a nonuniform distribution of interface states. The temperature dependent interface states densities (NSS), ideality factor inline image and barrier height inline image are obtained. An abnormal decrease in zero-bias barrier height (BH) and increase in the ideality factor ( inline image) with decreasing temperature have been explained on the basis of the thermionic emission theory with Gaussian distribution (GD) of the BHs due to the BH inhomogeneities. The experimental IV characteristics of Au/PVA/n-InP Schottky diode has revealed the existence of a double GD with mean BH values of ( inline image) of 1.246 and 0.899 eV and standard deviation ( inline image) of 0.176 and 0.137 V, respectively. Consequently, the modified conventional activation energy inline image versus inline image plot gives inline image and Richardson constants ( inline image) and the values are 1.17 and 0.71 eV and 9.9 and 6.9 A/cm2 K2, respectively, without using the temperature coefficient of the BH. The effective Richardson constant value of 9.9 A/cm2 K2 is very close to the theoretical value of 9.4 A/cm2 K2 for n-InP. The discrepancy between Schottky barrier heights estimated from IV and CV measurements is also discussed. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014, 131, 39773.

Get access to the full text of this article

Ancillary