Electrical, mechanical, and crystallization properties of ethylene-tetrafluoroethylene copolymer/multiwalled carbon nanotube composites



Multiwalled carbon nanotubes (MWCNTs) were melt-mixed in a conical twin-screw extruder with a random copolymer of ethylene and tetrafluoroethylene. Surprisingly, the electrical percolation threshold of the resultant composites was quite low; ∼0.9 wt %. In fact, this value is as low or lower than the value for most MWCNT/semicrystalline polymer composites made with roughly equivalent aspect ratio tubes mixed in a similar manner, for example, melt mixing. This low percolation threshold, suggestive of good dispersion, occurred even though the polymer surface energy is quite low which should make tubes more difficult to disperse. Dynamic mechanical measurements confirmed the rather low percolation threshold. The effect of nanotubes on crystallization kinetics was quite small; suggesting perhaps that a lack of nucleation which in turn reduces/eliminates an insulating crystalline polymer layer around the nanotubes might explain the low percolation threshold. Finally, the modulus increased with the addition of nanotubes and the strain at break decreased. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014, 131, 41052.