Journal of Applied Polymer Science

Cover image for Journal of Applied Polymer Science

5 October 2006

Volume 102, Issue 1

Pages 1–943

    1. Moisture sorption and thermal characteristics of polyaramide blend fabrics (pages 29–38)

      Gözde Genç, Burcu Alp, Devrim Balköse, Semra Ülkü and Aysun Cireli

      Article first published online: 28 JUN 2006 | DOI: 10.1002/app.24184

    2. 4,4′-Bismaleimidodiphenyl methane modified novolak resin/titania nanocomposites: Preparation and properties (pages 52–57)

      Guotao Lu, Ying Huang, Yehai Yan, Tong Zhao and Yunzhao Yu

      Article first published online: 28 JUL 2006 | DOI: 10.1002/app.22116

    3. Biocomposites synthesized from chemically modified soy oil and biofibers (pages 69–75)

      Phuong Tran, Daniel Graiver and Ramani Narayan

      Article first published online: 28 JUL 2006 | DOI: 10.1002/app.22265

    4. Morphology transition of bismaleimide-modified novolac resin (pages 76–83)

      Guotao Lu, Ying Huang, Yehai Yan, Tong Zhao and Yunzhao Yu

      Article first published online: 28 JUL 2006 | DOI: 10.1002/app.22601

    5. Gradient polymeric materials based on poorly compatible epoxy oligomers (pages 96–103)

      L. M. Amirova and K. A. Andrianova

      Article first published online: 28 JUL 2006 | DOI: 10.1002/app.23099

    6. Pulverization of rubber using modified solid state shear extrusion process (SSSE) (pages 119–127)

      Nima Shahidi, Hamid Arastoopour and George Ivanov

      Article first published online: 28 JUL 2006 | DOI: 10.1002/app.23259

    7. Effect of the average soft-segment length on the morphology and properties of segmented polyurethane nanocomposites (pages 128–139)

      Bradley Finnigan, Peter Halley, Kevin Jack, Alasdair McDowell, Rowan Truss, Phil Casey, Robert Knott and Darren Martin

      Article first published online: 28 JUL 2006 | DOI: 10.1002/app.23347

    8. Morphology and cure kinetics of unsaturated polyester resin/block copolymer blends (pages 149–165)

      N. Boyard, C. Sinturel, M. Vayer and R. Erre

      Article first published online: 28 JUL 2006 | DOI: 10.1002/app.23401

    9. Synthesis and amphiphilic 4-vinyl pyridine and n-vinyl pyrrolidone copolymer beads (pages 192–197)

      K. Sambasivudu, G. Maheedhar, V. Srinivasa Rao, M.V. Syam Kumar and D. Shailaja

      Article first published online: 28 JUL 2006 | DOI: 10.1002/app.23481

    10. The effect of γ-irradiation on thermal strain of high strength polyethylene fiber at low temperature (pages 204–209)

      Atsuhiko Yamanaka, Yoshinobu Izumi, Tooru Kitagawa, Takaya Terada, Hiroshi Hirahata, Kimiko Ema, Hiroyuki Fujishiro and Shigehiro Nishijima

      Article first published online: 28 JUL 2006 | DOI: 10.1002/app.23550

    11. Amino-capped aniline trimer/epoxy resin intercrosslinked networks (pages 222–226)

      Xiaojun Yang, Yanbin Jiang, Tong Zhao and Yunzhao Yu

      Article first published online: 28 JUL 2006 | DOI: 10.1002/app.23607

    12. Modification and characterization of poly(ethylene-co-vinyl alcohol) by glycosidation reaction (pages 227–232)

      Binyuan Liu, Zhixin Xue, Lu Liu, Li Zhang and Fang Liu

      Article first published online: 28 JUL 2006 | DOI: 10.1002/app.23636

    13. Distribution of carbon black in natural rubber/acrylic rubber blends (pages 248–256)

      J. Wootthikanokkhan and N. Rattanathamwat

      Article first published online: 28 JUL 2006 | DOI: 10.1002/app.23642

    14. Failure of multimaterial fusion bonding interface generated during over-injection molding/thermoforming hybrid process (pages 261–265)

      J. Aurrekoetxea, G. Castillo, F. Cortes, M. A. Sarrionandia and I. Urrutibeascoa

      Article first published online: 28 JUL 2006 | DOI: 10.1002/app.23696

    15. Interaction between polyacrylonitrile and alkalis (pages 272–275)

      Chen Hou, Wang Qun, Rongjun Qu and Chengguo Wang

      Article first published online: 28 JUL 2006 | DOI: 10.1002/app.23725

    16. Functionalization of chitosan membranes through phosphorylation: Atomic force microscopy, wettability, and cytotoxicity studies (pages 276–284)

      I. F. Amaral, P. L. Granja, Luís V. Melo, B. Saramago and M. A. Barbosa

      Article first published online: 28 JUL 2006 | DOI: 10.1002/app.23737

    17. Finite difference solutions of the heat equation in a molten polymer flowing in a circular tube (pages 289–294)

      C. H. Leong, D. G. Mohr, M. B. M. Elgindi and R. W. Langer

      Article first published online: 28 JUL 2006 | DOI: 10.1002/app.23780

    18. Variation of inhibited oxidation parameters in the range of phase transition (pages 312–314)

      I. G. Kalinina, K. Z. Gumargalieva and Yu. A. Shlyapnikov

      Article first published online: 28 JUL 2006 | DOI: 10.1002/app.23812

    19. Study on properties of low dielectric loss resin matrix (pages 315–319)

      Jieying Yang, Guozheng Liang and Lan Li

      Article first published online: 28 JUL 2006 | DOI: 10.1002/app.23813

    20. Technological evaluation of reactive cyclodextrin in cotton printing with reactive and natural dyes (pages 338–347)

      A. A. Hebeish, A. A. Ragheb, S. H. Nassar, E. E. Allam and J. I. Abd El Thalouth

      Article first published online: 28 JUL 2006 | DOI: 10.1002/app.23855

    21. New aspects of polymeric sheet punch deformation (pages 358–361)

      V. Daukantiene, B. Bernotiene and M. Gutauskas

      Article first published online: 28 JUL 2006 | DOI: 10.1002/app.23893

    22. Investigation on gradient dielectric characteristics of bamboo (Dentroclamus strictus) (pages 380–386)

      Navin Chand, Deepak Jain and Archna Nigrawal

      Article first published online: 28 JUL 2006 | DOI: 10.1002/app.23979

    23. Wetting behavior of thermally bonded polyester nonwoven fabrics: The importance of porosity (pages 387–394)

      Lu Zhu, Anne Perwuelz, Maryline Lewandowski and Christine Campagne

      Article first published online: 28 JUL 2006 | DOI: 10.1002/app.24008

    24. Swelling and release kinetics of larvicide-containing chitosan/cashew gum beads (pages 395–400)

      Haroldo C. B. Paula, Regina C. M. de Paula and Sterlane K. F. Bezerra

      Article first published online: 28 JUL 2006 | DOI: 10.1002/app.24009

    25. Stress relaxation of woodfiber–thermoplastic composites (pages 401–407)

      Debes Bhattacharyya, James Manikath and Krishnan Jayaraman

      Article first published online: 28 JUL 2006 | DOI: 10.1002/app.24018

    26. Properties of silk fibers modified with diethylene glycol dimethacrylate (pages 424–428)

      Guoqiang Chen, Jinping Guan, Tieling Xing and Xiang Zhou

      Article first published online: 28 JUL 2006 | DOI: 10.1002/app.24064

    27. Microfabrication by X-ray-induced polymerization above the lower critical solution temperature (pages 429–435)

      Vijay R. Tirumala, Gerard T. Caneba, Derrick C. Mancini and H. H. Wang

      Article first published online: 28 JUL 2006 | DOI: 10.1002/app.24073

    28. In vitro comparative hemostatic studies of chitin, chitosan, and their derivatives (pages 445–451)

      Wanida Janvikul, Paweena Uppanan, Boonlom Thavornyutikarn, Jirawat Krewraing and Rujiporn Prateepasen

      Article first published online: 28 JUL 2006 | DOI: 10.1002/app.24192

    29. Polymer blends of epoxy resin and epoxidized natural rubber (pages 452–459)

      S. Chuayjuljit, N. Soatthiyanon and P. Potiyaraj

      Article first published online: 28 JUL 2006 | DOI: 10.1002/app.24193

    30. Dissolution enhancement of flavonoids by solid dispersion in PVP and PEG matrixes: A comparative study (pages 460–471)

      F. I. Kanaze, E. Kokkalou, I. Niopas, M. Georgarakis, A. Stergiou and D. Bikiaris

      Article first published online: 28 JUL 2006 | DOI: 10.1002/app.24200

    31. Influence of PS-b-PEO diblock copolymers on the compatibility of syndiotactic polystyrene modified epoxy blends (pages 479–488)

      A. Tercjak, E. Serrano, M. D. Martin, C. Marieta and I. Mondragon

      Article first published online: 28 JUL 2006 | DOI: 10.1002/app.24204

    32. Colored rubber vulcanizates with some magnetic properties (pages 494–505)

      S. H. El-Sabbagh, N. M. Ahmed and W. M. Daoush

      Article first published online: 28 JUL 2006 | DOI: 10.1002/app.24207

    33. γ-Irradiation effects on the thermal and structural characteristics of modified, grafted polypropylene (pages 506–515)

      Magda M. I. Khalil, Naeem M. El-Sawy and Gamil A. El-Shobaky

      Article first published online: 28 JUL 2006 | DOI: 10.1002/app.24236

    34. Mechanical and tribological properties of PA66/PPS blend. III. Reinforced with GF (pages 523–529)

      Zhaobin Chen, Xujun Liu, Renguo Lü and Tongsheng Li

      Article first published online: 28 JUL 2006 | DOI: 10.1002/app.24253

    35. In situ polymerization of aniline in the presence of carbon black (pages 535–541)

      Fernando G. Souza Jr., Lys Sirelli, Ricardo C. Michel, Bluma G. Soares and Marcelo H. Herbst

      Article first published online: 28 JUL 2006 | DOI: 10.1002/app.24280

    36. Morphology and melt rheology of nylon 11/clay nanocomposites (pages 542–549)

      Xiaofeng He, Jun Yang, Lianchao Zhu, Biao Wang, Guangping Sun, Pengfei Lv, In Yee Phang and Tianxi Liu

      Article first published online: 28 JUL 2006 | DOI: 10.1002/app.24281

    37. Flammability and thermal degradation behaviors of phosphorus-containing copolyester/BaSO4 nanocomposites (pages 564–570)

      Ming-Hai Qu, Yu-Zhong Wang, Ya Liu, Xin-Guo Ge, De-Yi Wang and Chuan Wang

      Article first published online: 28 JUL 2006 | DOI: 10.1002/app.24304

    38. Solvents effect in horseradish peroxidase catalyzed modification of UHMWPE fiber (pages 674–678)

      Guoning Fan, Jingchan Zhao, Hongan Yuan, Zhian Guo, Junlong Wang and Guozheng Liang

      Article first published online: 28 JUL 2006 | DOI: 10.1002/app.24316

    39. Preparation of porous poly(lactic acid)/Sio2 hybrid microspheres (pages 679–683)

      Hualin Wang, Mingshan Fang, Tiejun Shi, Linfeng Zhai and Chao Tang

      Article first published online: 28 JUL 2006 | DOI: 10.1002/app.24122

    40. Synthesis and characterization of triglyceride-based polyols and tack-free coatings via the air oxidation of soy oil (pages 690–697)

      A. R. Fornof, E. Onah, S. Ghosh, C. E. Frazier, S. Sohn, G. L. Wilkes and T. E. Long

      Article first published online: 28 JUL 2006 | DOI: 10.1002/app.24327

    41. Fire-retardant properties of the viscose rayon containing alkoxycyclotriphosphazene (pages 698–702)

      Sheng Chen, Qing-kang Zheng, Guang-dou Ye and Guang-kong Zheng

      Article first published online: 28 JUL 2006 | DOI: 10.1002/app.24217

    42. Preparation and characterization of P(AN/VAC)/clay based nanocomposites (pages 703–706)

      Xiaohua Gu, Peng Xi, Yongtang Jia, Ting Liu and Xinyuan Shen

      Article first published online: 28 JUL 2006 | DOI: 10.1002/app.24355

    43. Bound rubber in chlorobutyl compounds: Influence of filler type and storage time (pages 715–720)

      V. Sridhar, B. R. Gupta and D. K. Tripathy

      Article first published online: 28 JUL 2006 | DOI: 10.1002/app.23031

    44. Radiation crosslinking of biodegradable carboxymethylchitin and carboxymethylchitosan (pages 758–767)

      J. M. Wasikiewicz, H. Mitomo, N. Nagasawa, T. Yagi, M. Tamada and F. Yoshii

      Article first published online: 28 JUL 2006 | DOI: 10.1002/app.24203

    45. Effect of selected boroorganic compounds on thermal and heat properties of rigid polyurethane–polyisocyanurate foams (pages 768–771)

      Bogusław Czupryński, Joanna Liszkowska and Joanna Paciorek-Sadowska

      Article first published online: 28 JUL 2006 | DOI: 10.1002/app.21987

    46. Fractionation of a silk fibroin hydrolysate and its protective function of hydrogen peroxide toxicity (pages 772–776)

      Joo-Hong Yeo, Kwang-Gill Lee, Hae-Yong Kweon, Soon-Ok Woo, Sang-Mi Han, Sung-Su Kim and Makoto Demura

      Article first published online: 28 JUL 2006 | DOI: 10.1002/app.23740

    47. Studies on synthesis, characterization, and metal adsorption of mimosa and valonia tannin resins (pages 786–797)

      Mahmut Özacar, Cengiz Soykan and İ. Ayhan Şengi̇l

      Article first published online: 28 JUL 2006 | DOI: 10.1002/app.23944

    48. Preparation of porous carbon microspheres (pages 798–803)

      Yonggen Lu, Changling Yang, Haiqin Rong and Ding Pan

      Article first published online: 28 JUL 2006 | DOI: 10.1002/app.24112

    49. Crystallization behavior of polyhydroxybutyrate in model composites with kenaf fibers (pages 804–809)

      A. Buzarovska, G. Bogoeva-Gaceva, A. Grozdanov and M. Avella

      Article first published online: 28 JUL 2006 | DOI: 10.1002/app.24139

    50. Characterization of 25 tropical hardwoods with Fourier transform infrared, ultraviolet resonance Raman, and 13C-NMR cross-polarization/magic-angle spinning spectroscopy (pages 810–819)

      Mari H. Nuopponen, Hanne I. Wikberg, Gillian M. Birch, Anna-Stiina Jääskeläinen, Sirkka L. Maunu, Tapani Vuorinen and Derek Stewart

      Article first published online: 28 JUL 2006 | DOI: 10.1002/app.24143

    51. Synthesis of polyethylene oxide hydrogels by electron radiation (pages 820–824)

      C. Branca, S. Magazù, G. Maisano, L. Auditore, R. C. Barnà, D. De Pasquale, U. Emanuele, A. Trifirò and M. Trimarchi

      Article first published online: 28 JUL 2006 | DOI: 10.1002/app.24238

    52. Biodegradation and the dynamic mechanical properties of starch gelatinization in poly(ε-caprolactone)/corn starch blends (pages 825–832)

      Derval dos Santos Rosa, José EduardoVolponi and Cristina das Graças Fassina Guedes

      Article first published online: 28 JUL 2006 | DOI: 10.1002/app.24279

    53. Effect of maleated polypropylene as coupling agent for polypropylene composites reinforced with hemp strands (pages 833–840)

      P. Mutjé, M. E. Vallejos, J. Gironès, F. Vilaseca, A. López, J. P. López and J. A. Méndez

      Article first published online: 28 JUL 2006 | DOI: 10.1002/app.24315

    54. Rheological properties of ethylcellulose latex (pages 847–851)

      V. Gallardo, M. E. Morales, J. López-Viota, J. D. G. Durán and M. A. Ruiz

      Article first published online: 28 JUL 2006 | DOI: 10.1002/app.24389

    55. Research on the molecular entanglement and disentanglement in the dry spinning process of UHMWPE/decalin solution (pages 864–875)

      Yushan Sun, Yourong Duan, Xueying Chen, Qi Zhang, Xiaofang Jin, Xiaojun Li, Yan Ma, Lin Sun and Qingrei Wang

      Article first published online: 28 JUL 2006 | DOI: 10.1002/app.23672

    56. Acrylonitrile/ammonium itaconate aqueous deposited copolymerization (pages 904–908)

      Chuansheng Cui, Chengguo Wang and Yaqi Zhao

      Article first published online: 28 JUL 2006 | DOI: 10.1002/app.24376

SEARCH

SEARCH BY CITATION