Journal of Applied Polymer Science

Cover image for Vol. 109 Issue 5

5 September 2008

Volume 109, Issue 5

Pages 2747–3437

    1. Antimicrobial polyester (pages 2756–2761)

      Xuehong Ren, Hasan B. Kocer, Lei Kou, S. D. Worley, R. M. Broughton, Y. M. Tzou and T. S. Huang

      Version of Record online: 13 MAY 2008 | DOI: 10.1002/app.28126

    2. Application of ultrasonic waves in activation of microcrystalline cellulose (pages 2762–2767)

      Xianling Wang, Guizhen Fang, Chunping Hu and Tianchuan Du

      Version of Record online: 19 MAY 2008 | DOI: 10.1002/app.27975

    3. Removal of basic dyes from aqueous solutions with sulfonated phenol–formaldehyde resin (pages 2774–2780)

      Tülin Banu İyim, Işıl Acar and Saadet Özgümüş

      Version of Record online: 19 MAY 2008 | DOI: 10.1002/app.28260

    4. Phase behavior and self-assembly of poly[N-vinylformamide-co-(acrylic acid)] copolymers under highly acidic conditions (pages 2802–2807)

      Qiang Chen, Xiaoguang Liu, Kun Xu, Chunlei Song, Wende Zhang and Pixin Wang

      Version of Record online: 20 MAY 2008 | DOI: 10.1002/app.28271

    5. Chemical grafting of metallocene-catalyzed functional polypropylene copolymer on glass substrates through surface modification (pages 2815–2822)

      Mariana Etcheverry, Daniel E. Damiani, María L. Ferreira, Silvia E. Barbosa and Numa J. Capiati

      Version of Record online: 20 MAY 2008 | DOI: 10.1002/app.28177

    6. Phase equilibrium characteristics of supercritical CO2/poly(ethylene terephthalate) binary system (pages 2836–2841)

      Zhi-Yi Li, Ting-Yu Meng, Xue-Wu Liu, Yuan-Jing Xia and Da-Peng Hu

      Version of Record online: 20 MAY 2008 | DOI: 10.1002/app.28323

    7. Advanced structural foam molding using a continuous polymer/gas melt flow stream (pages 2855–2861)

      Xiang Xu, Chul B. Park, John W. S. Lee and Xindong Zhu

      Version of Record online: 20 MAY 2008 | DOI: 10.1002/app.28248

    8. Introducing two simple models for predicting fiber-reinforced asphalt concrete behavior during longitudinal loads (pages 2872–2881)

      Sayyed Mahdi Hejazi, Sayyed Mahdi Abtahi, Mohammad Sheikhzadeh and Dariush Semnani

      Version of Record online: 20 MAY 2008 | DOI: 10.1002/app.28349

    9. Adjustable wettability of methyl methacrylate modified ramie fiber (pages 2888–2894)

      Zhao-Tie Liu, Chang'an Sun, Zhong-Wen Liu and Jian Lu

      Version of Record online: 20 MAY 2008 | DOI: 10.1002/app.28259

    10. Preparation of Zn2+-chelated poly(HEMA-MAH) cryogel for affinity purification of chicken egg lysozyme (pages 2905–2913)

      Ali Derazshamshir, Bahar Ergün, Gözde Peşint and Mehmet Odabaşı

      Version of Record online: 20 MAY 2008 | DOI: 10.1002/app.28345

    11. Synthesis of an amphiphilic glucose-carrying graft copolymer and its use for membrane surface modification (pages 2914–2923)

      Jianyu Wang, Youyi Xu, Hong Xu, Fan Zhang, Yanling Qian and Baoku Zhu

      Version of Record online: 20 MAY 2008 | DOI: 10.1002/app.28400

    12. Liquid crystalline epoxy resin modified cyanate ester/epoxy resin systems (pages 2964–2972)

      Yingfeng Yu, Wenjun Gan, Xiaoyun Liu and Shanjun Li

      Version of Record online: 20 MAY 2008 | DOI: 10.1002/app.28358

    13. Kinetics and mechanism of seeded dispersion polymerization (pages 2979–2987)

      Sheng Jiang, E. David Sudol, Victoria L. Dimonie and Mohamed S. El-Aasser

      Version of Record online: 20 MAY 2008 | DOI: 10.1002/app.28364

    14. Water and salt permeability of reinforcement polymer-gel composite membrane (pages 2988–2993)

      A. Mounir EL Sayed, A. Yamauchi, N. A. Darwish, A. A. Abd EL-Mageed and S. F. Halim

      Version of Record online: 20 MAY 2008 | DOI: 10.1002/app.28366

    15. Quercetin microspheres by solvent evaporation: Preparation, characterization and release behavior (pages 2994–3001)

      Paola Scarfato, Elvira Avallone, Pio Iannelli, Rita P. Aquino, Maria Rosaria Lauro, Alessandra Rossi and Domenico Acierno

      Version of Record online: 20 MAY 2008 | DOI: 10.1002/app.28365

    16. Water vapor permeability of the polyurethane/TiO2 nanohybrid membrane with temperature sensitivity (pages 3002–3007)

      Hu Zhou, Yi Chen, Haojun Fan, Huanhuan Shi, Zhaoyang Luo and Bi Shi

      Version of Record online: 20 MAY 2008 | DOI: 10.1002/app.28427

    17. Lignins as macromonomers for polyurethane synthesis: A comparative study on hydroxyl group determination (pages 3008–3017)

      Carolina Andreia Cateto, Maria Filomena Barreiro, Alírio Egídio Rodrigues, Marie Christine Brochier-Salon, Wim Thielemans and Mohamed Naceur Belgacem

      Version of Record online: 20 MAY 2008 | DOI: 10.1002/app.28393

    18. Mechanical damage to estabragh fibers in the production of thermobonded layers (pages 3062–3069)

      Ali Akbar Gharehaghaji and Sara Hayat Davoodi

      Version of Record online: 21 MAY 2008 | DOI: 10.1002/app.28230

    19. Crystallization of poly(butylene terephthalate)/poly(ethylene octene) blends: Isothermal crystallization (pages 3070–3079)

      Jiann-Wen Huang, Ya-Lan Wen, Chiun-Chia Kang, Mou-Yung Yeh and Shaw-Bing Wen

      Version of Record online: 21 MAY 2008 | DOI: 10.1002/app.27628

    20. Mechanical properties and thermal stability of poly(L-lactide)/calcium carbonate composites (pages 3087–3092)

      Hun-Sik Kim, Byung Hyun Park, Jae Hoon Choi and Jin-San Yoon

      Version of Record online: 21 MAY 2008 | DOI: 10.1002/app.28229

    21. Dynamically vulcanized PP/EPDM blends: Influence of curing agents on the morphology evolution (pages 3093–3100)

      Adriana Nicolini, Tatiana Louise Ávila de Campos Rocha and Marly Antonia Maldaner Jacobi

      Version of Record online: 21 MAY 2008 | DOI: 10.1002/app.28322

    22. Effect of die geometry on foaming behaviors of high-melt-strength polypropylene with CO2 (pages 3122–3132)

      Patrick C. Lee, Wanrudee Kaewmesri, Jing Wang, Chul B. Park, Jantrawan Pumchusak, Rick Folland and Andreas Praller

      Version of Record online: 23 MAY 2008 | DOI: 10.1002/app.28204

    23. Poly(p-phenylene benzoxazole) fiber chemically modified by the incorporation of sulfonate groups (pages 3133–3139)

      Jian Ming Jiang, Hui Jun Zhu, Guang Li, Jun Hong Jin and Sheng Lin Yang

      Version of Record online: 23 MAY 2008 | DOI: 10.1002/app.28249

    24. Preparation and characterization of a new coagulant based on the sago starch biopolymer and its application in water turbidity removal (pages 3140–3147)

      I. Y. Qudsieh, A. Fakhru' l-Razi, N. A. Kabbashi, M. E. S. Mirghani, K. G. Fandi, M. Z. Alam, S. A. Muyibi and M. M. Nasef

      Version of Record online: 23 MAY 2008 | DOI: 10.1002/app.28399

    25. Crystallization of polycaprolactone–clay nanocomposites (pages 3148–3156)

      Leandro N. Ludueña, Analía Vazquez and Vera A. Alvarez

      Version of Record online: 23 MAY 2008 | DOI: 10.1002/app.28266

    26. Studies on jute–asphalt composites (pages 3165–3172)

      Prabir K. Banerjee and Mahuya Ghosh

      Version of Record online: 23 MAY 2008 | DOI: 10.1002/app.28325

    27. Increasing recyclability of PC, ABS and PMMA: Morphology and fracture behavior of binary and ternary blends (pages 3210–3223)

      Jan Rybnicek, Ralf Lach, Monika Lapcikova, Josef Steidl, Zdenek Krulis, Wolfgang Grellmann and Miroslav Slouf

      Version of Record online: 23 MAY 2008 | DOI: 10.1002/app.28376

    28. Local dynamics in epoxy coatings containing iron oxide nanoparticles by dielectric relaxation spectroscopy (pages 3224–3229)

      G. Kortaberria, P. Arruti, A. Jimeno, I. Mondragon and M. Sangermano

      Version of Record online: 23 MAY 2008 | DOI: 10.1002/app.28395

    29. Development and use of a turbidity analyzer for studying the solution crystallization of polyolefins (pages 3238–3243)

      A. J. van Reenen, E. G. Rohwer, P. Walters, M. Lutz and M. Brand

      Version of Record online: 23 MAY 2008 | DOI: 10.1002/app.28390

    30. Photoresponsive polyacrylamide based on grafted azodianiline (pages 3244–3248)

      Ruhai Tian, Nishant Bhatambrekar, Yi Liao and Ming Su

      Version of Record online: 23 MAY 2008 | DOI: 10.1002/app.28435

    31. Synthesis and characterization of rubber-seed-oil-based polyurethanes (pages 3292–3301)

      Isiaka O. Bakare, C. Pavithran, Felix E. Okieimen and C. K. S. Pillai

      Version of Record online: 27 MAY 2008 | DOI: 10.1002/app.28391

    32. Photocrosslinked electrospun chitosan-based biocompatible nanofibers (pages 3337–3343)

      Yu Jin, Dongzhi Yang, Yingshan Zhou, Guiping Ma and Jun Nie

      Version of Record online: 27 MAY 2008 | DOI: 10.1002/app.28371

    33. μ-Gels as support materials for dinuclear olefin polymerization catalysts (pages 3344–3354)

      Marc Schilling, Christian Görl and Helmut G. Alt

      Version of Record online: 27 MAY 2008 | DOI: 10.1002/app.28373

    34. High-frequency welding of thermoplastic LLDPE/PA 6/PE-g-MAH ternary blends (pages 3355–3360)

      C. S. Yoon, E. M. Lee, M. S. Jang, C. K. Song, C. Y. Kang, K. H. Kim and B. K. Kim

      Version of Record online: 27 MAY 2008 | DOI: 10.1002/app.28444

    35. Synthesis and properties of novel poly(benzimidazopyrrolone amide)s containing pyridine moieties (pages 3369–3375)

      Xiaolong Wang, Yanfeng Li, Chenliang Gong, Tao Ma and Shujiang Zhang

      Version of Record online: 27 MAY 2008 | DOI: 10.1002/app.28406

    36. Synthesis and properties of chitosan-modified poly(acrylic acid) (pages 3382–3389)

      Chung-Yang Chuang, Trong-Ming Don and Wen-Yen Chiu

      Version of Record online: 27 MAY 2008 | DOI: 10.1002/app.28420

    37. Preparation and characterization of electrospun, biodegradable membranes (pages 3390–3397)

      Jie Ren, Wanqiang Liu, Jing Zhu and Shuying Gu

      Version of Record online: 27 MAY 2008 | DOI: 10.1002/app.28410

    38. Raman spectroscopy for spinline crystallinity measurements. I. Experimental studies (pages 3413–3420)

      Rajesh P. Paradkar, Rajen M. Patel, Ed Knickerbocker and Antonios Doufas

      Version of Record online: 27 MAY 2008 | DOI: 10.1002/app.28388

SEARCH

SEARCH BY CITATION