Journal of Applied Polymer Science

Cover image for Journal of Applied Polymer Science

15 October 2009

Volume 114, Issue 2

Pages 671–1355

    1. Separation of hematopoietic stem and progenitor cells from human peripheral blood through polyurethane foaming membranes modified with several amino acids (pages 671–679)

      Akon Higuchi, Siou-Ting Yang, Pei-Tsz Li, Hui Chen, Ruoh-Chyu Ruaan, Wen-Yih Chen, Yung Chang, Yu Chang, Eing Mei Tsai, Qing-Dong Ling, Han-Chow Wang and Shih-Tien Hsu

      Version of Record online: 8 JUN 2009 | DOI: 10.1002/app.30564

    2. Synthesis and characterization of copolymers of alkyl- and azo-thiophenes: Chromic properties and photoinduced birefringence (pages 680–687)

      Vanessa C. Gonçalves, Lígia M. M. Costa, Marcos R. Cardoso, Cleber R. Mendonca and Débora T. Balogh

      Version of Record online: 8 JUN 2009 | DOI: 10.1002/app.30575

    3. Investigation of Pluronic© F127–Water solutions phase transitions by DSC and dielectric spectroscopy (pages 688–695)

      Anna Angela Barba, Matteo d'Amore, Mario Grassi, Serafina Chirico, Gaetano Lamberti and Giuseppe Titomanlio

      Version of Record online: 8 JUN 2009 | DOI: 10.1002/app.30586

    4. Monitoring the stability of nanosized silica dispersions in presence of polycations by a novel centrifugal sedimentation method (pages 696–704)

      Gudrun Petzold, Christine Goltzsche, Mandy Mende, Simona Schwarz and Werner Jaeger

      Version of Record online: 8 JUN 2009 | DOI: 10.1002/app.30608

    5. Thermal degradation analysis of polyamide 6 processed at different cycles using sequential pyrolysis (pages 713–719)

      Francisco Parres, José Enrique Crespo and Antonio Nadal-Gisbert

      Version of Record online: 8 JUN 2009 | DOI: 10.1002/app.30595

    6. Terminal functionalized hydroxyl-terminated polybutadiene: An energetic binder for propellant (pages 732–741)

      Rajavelu Murali Shankar, Tapta Kanchan Roy and Tushar Jana

      Version of Record online: 8 JUN 2009 | DOI: 10.1002/app.30665

    7. Properties and morphology of poly(lactic acid)/soy protein isolate blends (pages 754–759)

      Kun Fang, Biaobing Wang, Kuichuan Sheng and Xiuzhi Susan Sun

      Version of Record online: 9 JUN 2009 | DOI: 10.1002/app.30446

    8. UV-grafted gradient surface polyurethane membrane (pages 769–774)

      Peizhong Zhao, Xingyan Hua, Yuansheng Wang, Jinhua Zhu and Fei Niu

      Version of Record online: 10 JUN 2009 | DOI: 10.1002/app.30479

    9. Development of a poloxamer analogs/bioadhesive polymers-based in situ gelling ophthalmic delivery system for tiopronin (pages 775–783)

      Tong-Ying Jiang, Chang-Shan Sun, Xue Shen, Tian-Yi Wang and Si-Ling Wang

      Version of Record online: 10 JUN 2009 | DOI: 10.1002/app.30520

    10. Nano-sized chalk-protein deposits as filler of elastomers (pages 800–805)

      Anita Przepiórkowska, Karolina Chrońska and Miroslawa Prochoń

      Version of Record online: 15 JUN 2009 | DOI: 10.1002/app.30067

    11. Preparation of low-protein natural rubber latex: Effect of polyethylene glycol (pages 806–810)

      G. Abhilash, S. Sabharwal, Abhinav Dubey, Jose Paul, Honey John and Rani Joseph

      Version of Record online: 15 JUN 2009 | DOI: 10.1002/app.30491

    12. Preparation and characterization of improved microspheres containing bovine serum albumin (pages 818–825)

      Fan Li, Feng Tian, Chang-Jun Liu and Yong-Liang Zhao

      Version of Record online: 15 JUN 2009 | DOI: 10.1002/app.30478

    13. Properties of poly(vinyl chloride) and polyesteramides blends (pages 826–833)

      Radka Kalousková, Ludìk Markvart, Jana Kredatusová and Jiří Brožek

      Version of Record online: 15 JUN 2009 | DOI: 10.1002/app.30516

    14. Resiliency of silicone o-rings (pages 843–846)

      Howard A. Katzman, Franklin D. Ross and Pierre R. Valenzuela

      Version of Record online: 15 JUN 2009 | DOI: 10.1002/app.30447

    15. Effect of poly(ethylene oxide)- poly(ethylene glycol) addition on actuation behavior of cellulose electroactive paper (pages 847–852)

      Suresha K. Mahadeva, Jaehwan Kim, Kwang Sun Kang, Heung Soo Kim and Joung Man Park

      Version of Record online: 15 JUN 2009 | DOI: 10.1002/app.30450

    16. Effects of expandable graphite and ammonium polyphosphate on the flame-retardant and mechanical properties of rigid polyurethane foams (pages 853–863)

      Xian-Yan Meng, Ling Ye, Xiao-Guang Zhang, Pei-Mei Tang, Jian-Hua Tang, Xu Ji and Zhong-Ming Li

      Version of Record online: 15 JUN 2009 | DOI: 10.1002/app.30485

    17. High shear strain rate rheometry of polymer melts (pages 864–873)

      A. L. Kelly, T. Gough, B. R. Whiteside and P. D. Coates

      Version of Record online: 15 JUN 2009 | DOI: 10.1002/app.30552

    18. Preparation of poly(ester imide) ultrafine fibers by gas-jet/electrospinning (pages 883–891)

      Bing Wang, Yongyi Yao, Jinrong Peng, Yi Lin, Wenlong Liu, Yang Luo, Ruili Xiang, Ruixia Li and Dacheng Wu

      Version of Record online: 15 JUN 2009 | DOI: 10.1002/app.30505

    19. Synthesis of thermoreactive polysiloxanes with cyclic fragments in the side chain (pages 892–900)

      Omari Mukbaniani, Tamara Tatrishvili, Giorgi Titvinidze and Sopho Patsatsia

      Version of Record online: 15 JUN 2009 | DOI: 10.1002/app.30530

    20. Influence of the incorporation of fine calcium carbonate particles on the impact strength of polypropylene/polystyrene-block-poly(ethylene butene)-block-polystyrene blends (pages 919–927)

      Shigeki Hikasa, Kazuya Nagata, Kenji Miyahara, Toshihiro Izumi, Toshiya Suda, Asami Toyohara, Atushi Kato and Yoshinobu Nakamura

      Version of Record online: 15 JUN 2009 | DOI: 10.1002/app.30643

    21. Synthesis and characterization of conducting polyaniline prepared by laccase-catalyzed method in sodium dodecylbenzenesulfonate micellar solutions (pages 928–934)

      Alexander V. Streltsov, Olga V. Morozova, Nataliya A. Arkharova, Vera V. Klechkovskaya, Irina N. Staroverova, Galina P. Shumakovich and Alexander I. Yaropolov

      Version of Record online: 15 JUN 2009 | DOI: 10.1002/app.30591

    22. A simple method for the preparation of stable chitooligomers (pages 956–961)

      Lintao Zeng, Caiqin Qin, Wei Li and Wei Wang

      Version of Record online: 16 JUN 2009 | DOI: 10.1002/app.29286

    23. New generation polymeric nanospheres for catalase immobilization (pages 962–970)

      Sinan Akgöl, Nevra Öztürk and Adil Denizli

      Version of Record online: 16 JUN 2009 | DOI: 10.1002/app.29790

    24. Structural and mechanical behavior of layered zirconium phosphonate as a distributed phase in polycaprolactone (pages 993–1001)

      Benjamin R. Furman, Stephen T. Wellinghoff, Richard M. Laine, Kwai S. Chan, Daniel P. Nicolella and H. Ralph Rawls

      Version of Record online: 16 JUN 2009 | DOI: 10.1002/app.30501

    25. Elongational behavior of epoxy during curing (pages 1018–1024)

      Osamu Takiguchi, Masataka Sugimoto, Takashi Taniguchi and Kiyohito Koyama

      Version of Record online: 16 JUN 2009 | DOI: 10.1002/app.30553

    26. High-performance bio-based thermosetting resins composed of dehydrated castor oil and bismaleimide (pages 1033–1039)

      Ken-Ichi Hirayama, Tomomi Irie, Naozumi Teramoto and Mitsuhiro Shibata

      Version of Record online: 16 JUN 2009 | DOI: 10.1002/app.30562

    27. Nonisothermal crystallization and melting behavior of poly(ε-caprolactone)-b-poly(ethylene glycol)-b-poly(ε-caprolactone) by DSC analysis (pages 1133–1140)

      Zhiyong Wei, Fengyun Yu, Guangyi Chen, Chao Qu, Pei Wang, Wanxi Zhang, Jicai Liang, Min Qi and Lian Liu

      Version of Record online: 16 JUN 2009 | DOI: 10.1002/app.30706

    28. Removal of basic dyes from aqueous solutions by crosslinked-acrylic acid/acrylamidopropane sulfonic acid hydrogels (pages 1150–1159)

      M. Çağil Akkaya, Serkan Emik, Gamze Güçlü, Tülin Banu İyim and Saadet Özgümüş

      Version of Record online: 16 JUN 2009 | DOI: 10.1002/app.30704

    29. The properties of reactive hot melt polyurethane adhesives modified with novel thermoplastic polyurethanes (pages 1169–1175)

      Tae K. Kim, Byung K. Kim, Yong S. Kim, Yang L. Cho, Sang Y. Lee, Youn B. Cho, Joe H. Kim and Han M. Jeong

      Version of Record online: 16 JUN 2009 | DOI: 10.1002/app.30730

    30. Microstructure and physical properties of open-cell polyolefin foams (pages 1176–1186)

      M. A. Rodriguez-Perez, M. Álvarez-Láinez and J. A. de Saja

      Version of Record online: 17 JUN 2009 | DOI: 10.1002/app.30283

    31. Recycled poly(ethylene terephthalate)/linear low-density polyethylene blends through physical processing (pages 1187–1194)

      Yue Zhang, Hongsheng Zhang, Yingbo Yu, Weihong Guo and Chifei Wu

      Version of Record online: 17 JUN 2009 | DOI: 10.1002/app.30030

    32. Synthesis and properties of a new type of unsaturated poly(ester amide) (pages 1208–1212)

      Yong-Ping Ai, Fen Jiang, Shi-Kun Xie and Rong-Xi Yi

      Version of Record online: 17 JUN 2009 | DOI: 10.1002/app.30157

    33. Polyimides derived from 1,4-bis [3-oxy-(N-aminophthalimide)] benzene (pages 1226–1234)

      Taihang Li, Jingling Yan, Huili Yang, Dongfeng Li, Zhen Wang and Mengxian Ding

      Version of Record online: 18 JUN 2009 | DOI: 10.1002/app.29488

    34. Sodium alginate/Na+-rectorite composite films: Preparation, characterization, and properties (pages 1235–1240)

      Lianli Yang, Guozheng Liang, Zengping Zhang, Shaobo He and Jinhe Wang

      Version of Record online: 18 JUN 2009 | DOI: 10.1002/app.30521

    35. Synthesis of functionalized liquid rubbers from polyisoprene (pages 1241–1249)

      Konstantin A. Dubkov, Sergey V. Semikolenov, Dmitry P. Ivanov, Dmitry E. Babushkin, Mikhail A. Matsko and Gennady I. Panov

      Version of Record online: 18 JUN 2009 | DOI: 10.1002/app.29637

    36. Glass fiber-reinforced composite based on benzoxazine resin (pages 1256–1263)

      Hajime Kimura, Akihiro Matsumoto and Keiko Ohtsuka

      Version of Record online: 18 JUN 2009 | DOI: 10.1002/app.30427

    37. Effect of orotic acid as a nucleating agent on the crystallization of bacterial poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) copolymers (pages 1287–1294)

      Nicolas Jacquel, Koichirou Tajima, Nobuo Nakamura, Toshio Miyagawa, Pengju Pan and Yoshio Inoue

      Version of Record online: 18 JUN 2009 | DOI: 10.1002/app.30587

    38. Preparation and properties of flame retardant poly(urethane-imide)s containing phosphine oxide moiety (pages 1329–1338)

      Özdemir Özarslan, Mustafa Kemal Bayazıt and Efkan Çatıker

      Version of Record online: 18 JUN 2009 | DOI: 10.1002/app.30601

    39. Synthetic tannins structure by MALDI-TOF mass spectroscopy (pages 1339–1347)

      S. Giovando, A. Pizzi, H. Pasch and K. Rode

      Version of Record online: 18 JUN 2009 | DOI: 10.1002/app.30667

SEARCH

SEARCH BY CITATION