Journal of Applied Polymer Science

Cover image for Journal of Applied Polymer Science

5 May 2010

Volume 116, Issue 3

Pages 1237–1856

    1. A stacked neural network approach for yield prediction of propylene polymerization (pages 1237–1246)

      Seyed Ali Monemian, Hamed Shahsavan, Oberon Bolouri, Shahrouz Taranejoo, Vahabodin Goodarzi and Mahmood Torabi-Angaji

      Article first published online: 23 DEC 2009 | DOI: 10.1002/app.31251

    2. Relationship between structure and rheological, mechanical and thermal properties of polylactide/Cloisite 30B nanocomposites (pages 1357–1365)

      Lynda Zaidi, Stéphane Bruzaud, Alain Bourmaud, Pascal Médéric, Mustapha Kaci and Yves Grohens

      Article first published online: 23 DEC 2009 | DOI: 10.1002/app.31655

    3. Investigation on the melt spinning fibers of PP/organoclay nanocomposites prepared by in-situ polymerization (pages 1384–1391)

      Chaowei Hao, Ying Zhao, Aihua He, Xiuqin Zhang, Dujin Wang, Qingfang Ma and Yizhuang Xu

      Article first published online: 4 JAN 2010 | DOI: 10.1002/app.30392

    4. Effect of metallic flask closure and investment materials on the stability of the denture base resin (pages 1467–1474)

      Rafael Leonardo Xediek Consani, Marcelo Ferraz Mesquita, Lourenço Correr Sobrinho and Mario Alexandre Coelho Sinhoreti

      Article first published online: 4 JAN 2010 | DOI: 10.1002/app.31713

    5. Sulfonated poly(ether sulfone)/silica composite membranes for direct methanol fuel cells (pages 1491–1498)

      Sheng Wen, Chunli Gong, Wen-Chin Tsen, Yao-Chi Shu and Fang-Chang Tsai

      Article first published online: 4 JAN 2010 | DOI: 10.1002/app.31699

    6. High-strength and high-toughness polyimide nanofibers: Synthesis and characterization (pages 1581–1586)

      Chuyun Cheng, Juan Chen, Fei Chen, Ping Hu, Xiang-Fa Wu, Darrell H. Reneker and Haoqing Hou

      Article first published online: 5 JAN 2010 | DOI: 10.1002/app.31523

    7. Electrical and optical properties of polyaniline with a weblike morphology (pages 1587–1592)

      Kaushik Mallick, Michael Witcomb, Rudolph Erasmus and André Strydom

      Article first published online: 5 JAN 2010 | DOI: 10.1002/app.31441

    8. Fabrication and properties of solution-cast polyaniline/carboxymethylchitin blend films (pages 1626–1634)

      Tuspon Thanpitcha, Anuvat Sirivat, Alexander M. Jamieson and Ratana Rujiravanit

      Article first published online: 5 JAN 2010 | DOI: 10.1002/app.31494

    9. The molecular arrangement of Bifenthrin® in ether based polyurethane: Designing a synthetic termite barrier (pages 1635–1639)

      Sharad Rajendran, Bronwen W. Cribb, Aaron Stewart, Myron Zalucki, Barry Noller and Rowan W. Truss

      Article first published online: 5 JAN 2010 | DOI: 10.1002/app.31537

    10. Synthesis and properties of novel aromatic polyamides with xanthene cardo groups (pages 1650–1659)

      Shou-Ri Sheng, Chun-Xin Ma, Jian-Wen Jiang, Zhen-Zhong Huang and Cai-Sheng Song

      Article first published online: 5 JAN 2010 | DOI: 10.1002/app.31515

    11. Effect of treatment of Bis(3-triethoxysilyl propyl)tetrasulfane on physical property of in situ sodium activated and organomodified bentonite clay – SBR rubber nanocomposite (pages 1660–1670)

      Sugata Chakraborty, Saptarshi Kar, Saikat Dasgupta, Rabindra Mukhopadhyay, Samar Bandyopadhyay, Mangala Joshi and Suresh C. Ameta

      Article first published online: 5 JAN 2010 | DOI: 10.1002/app.31549

    12. Preparation of semirigid polyurethane foam with liquefied bamboo residues (pages 1694–1699)

      Long-Lan Gao, Yu-Huan Liu, Hanwu Lei, Hong Peng and Roger Ruan

      Article first published online: 5 JAN 2010 | DOI: 10.1002/app.31556

    13. Surface modification of nylon membrane by glycidyl methacrylate graft copolymerization for antibody immobilization (pages 1700–1709)

      Richa Jackeray, Swati Jain, Sruti Chattopadhyay, Manu Yadav, T. G. Shrivastav and Harpal Singh

      Article first published online: 5 JAN 2010 | DOI: 10.1002/app.31578

    14. Statistical thermal stability of PVC (pages 1811–1822)

      Sevdiye Atakul Savrık, Beyhan Cansever Erdoğan, Devrim Balköse and Semra Ülkü

      Article first published online: 5 JAN 2010 | DOI: 10.1002/app.31763

    15. Relating microhardness to injection molding induced morphology: A study of microbeam synchrotron WAXD (pages 1823–1831)

      Yutaka Kobayashi, Hiroaki Kanno, Yasuhiro Hanamoto, Makoto Ando and Toshitaka Kanai

      Article first published online: 5 JAN 2010 | DOI: 10.1002/app.31719

    16. Novel thermo-responsive semi-interpenetrating network microspheres of gellan gum-poly(N-isopropylacrylamide) for controlled release of atenolol (pages 1832–1841)

      Raghavendra C. Mundargi, Namdev B. Shelke, V. Ramesh Babu, Pradip Patel, Vidhya Rangaswamy and Tejraj M. Aminabhavi

      Article first published online: 7 JAN 2010 | DOI: 10.1002/app.31551

SEARCH

SEARCH BY CITATION