Journal of Applied Polymer Science

Cover image for Vol. 119 Issue 4

15 February 2011

Volume 119, Issue 4

Pages 1873–2494

    1. Entrapment of urease in poly(1-vinyl imidazole)/poly(2-acrylamido-2-methyl-1-propanesulfonic acid) network (pages 1931–1939)

      Mehmet Şenel, Emre Çevik, M. Fatih Abasıyanık and Ayhan Bozkurt

      Version of Record online: 23 AUG 2010 | DOI: 10.1002/app.32896

    2. Shear and extensional rheology and flow-induced orientation of carbon nanofiber/polystyrene melt composites (pages 1940–1951)

      Koki Miyazono, Christopher D. Kagarise, Kurt W. Koelling, Monon Mahboob and Stephen E. Bechtel

      Version of Record online: 23 AUG 2010 | DOI: 10.1002/app.32923

    3. Pineapple leaf fiber reinforced thermoplastic composites: Effects of fiber length and fiber content on their characteristics (pages 1952–1960)

      Rungsima Chollakup, Rattana Tantatherdtam, Suchada Ujjin and Klanarong Sriroth

      Version of Record online: 23 AUG 2010 | DOI: 10.1002/app.32910

    4. Thermal stability and flame retardancy of polyester, cotton, and relative blend textile fabrics subjected to sol–gel treatments (pages 1961–1969)

      Jenny Alongi, Mihaela Ciobanu, Jennifer Tata, Federico Carosio and Giulio Malucelli

      Version of Record online: 23 AUG 2010 | DOI: 10.1002/app.32954

    5. Retracted: Microencapsulation of intumescent flame-retardant agent and application to epoxy resins (pages 2025–2030)

      Ming Gao, Yaqi Wo and Weihong Wu

      Version of Record online: 25 AUG 2010 | DOI: 10.1002/app.32930

      Corrected by:

      Retraction: Microencapsulation of intumescent flame-retardant agent and application to epoxy resins

      Vol. 128, Issue 1, 923, Version of Record online: 7 DEC 2012

    6. Decomposition rate control of PLLA plate by heat treatment (pages 2031–2038)

      Masafumi Nakagawa, Fumio Teraoka and Taiji Sohmura

      Version of Record online: 25 AUG 2010 | DOI: 10.1002/app.32931

    7. Evaluation of interfacial layer properties in the polystyrene/silica nanocomposite (pages 2039–2047)

      Mehrzad Mortezaei, Gholamali Farzi, Mohammad Reza Kalaee and Mahmood Zabihpoor

      Version of Record online: 26 AUG 2010 | DOI: 10.1002/app.32902

    8. Synthesis of Zn/Mg oxide nanoparticles and its influence on sulfur vulcanization (pages 2048–2057)

      Manuel Guzmán, Guillermo Reyes, Núria Agulló and Salvador Borrós

      Version of Record online: 26 AUG 2010 | DOI: 10.1002/app.32885

    9. Crystallization of amorphous poly(lactic acid) induced by organic solvents (pages 2058–2064)

      Naofumi Naga, Yuji Yoshida, Masaya Inui, Keiichi Noguchi and Shigemitsu Murase

      Version of Record online: 26 AUG 2010 | DOI: 10.1002/app.32890

    10. Segmented poly(urethane-urea) elastomers based on polycaprolactone: Structure and properties (pages 2093–2104)

      L. May-Hernández, F. Hernández-Sánchez, J. L. Gomez-Ribelles and R. Sabater-i Serra

      Version of Record online: 26 AUG 2010 | DOI: 10.1002/app.32929

    11. Influence of crosslinkers and crosslinking method on the properties of gelatin films extracted from leather solid waste (pages 2105–2111)

      M. Catalina, G. E. Attenburrow, J. Cot, A. D. Covington and A. P. M. Antunes

      Version of Record online: 26 AUG 2010 | DOI: 10.1002/app.32932

    12. Numerical approach to modeling fiber motion during melt blowing (pages 2112–2123)

      Y. C. Zeng, Y. F. Sun and X. H. Wang

      Version of Record online: 26 AUG 2010 | DOI: 10.1002/app.32921

    13. Predicting cohesive failure in thermosets (pages 2143–2152)

      Douglas B. Adolf, Robert S. Chambers, Brenton Elisberg, Mark Stavig and Mary Ruff

      Version of Record online: 26 AUG 2010 | DOI: 10.1002/app.32938

    14. Use of solid residue from olive kernel pyrolysis for polymer matrix composite manufacturing: Physical and mechanical characterization (pages 2167–2173)

      G. C. Papanicolaou, A. G. Xepapadaki, G. C. Angelakopoulos, A. Zabaniotou and O. Ioannidou

      Version of Record online: 26 AUG 2010 | DOI: 10.1002/app.32944

    15. Novel materials from unsaturated polyester resin/styrene/tung oil blends with high impact strengths and enhanced mechanical properties (pages 2174–2182)

      Kunal Das, Dipa Ray, Chitrita Banerjee, N. R. Bandyopadhyay, Amar K. Mohanty and Manjusri Misra

      Version of Record online: 27 AUG 2010 | DOI: 10.1002/app.32957

    16. Synthesis of a novel histidine-targeting poly(ethylene glycol) and modification of lysozyme (pages 2183–2188)

      Jingjing Sun, Xiaoda Song, Hong Tian, Yuhao Jin, Xiangdong Gao and Wenbing Yao

      Version of Record online: 27 AUG 2010 | DOI: 10.1002/app.32908

    17. Enhancing compatibilizer function by controlled distribution in hydrophobic polylactic acid/hydrophilic starch blends (pages 2189–2195)

      Long Yu, Eustathios Petinakis, Katherine Dean, Hongshen Liu and Qiang Yuan

      Version of Record online: 27 AUG 2010 | DOI: 10.1002/app.32949

    18. Film formation and surface properties of enzymatically crosslinked casein films (pages 2205–2213)

      Helka Juvonen, Maria Smolander, Harry Boer, Jaakko Pere, Johanna Buchert and Jouko Peltonen

      Version of Record online: 27 AUG 2010 | DOI: 10.1002/app.32943

    19. Influence of supercritical CO2 on the interactions between maleated polypropylene and alkyl-ammonium organoclay (pages 2223–2234)

      J. Liu, M. R. Thompson, M. P. Balogh, R. L. Speer Jr., P. D. Fasulo and W. R. Rodgers

      Version of Record online: 27 AUG 2010 | DOI: 10.1002/app.32947

    20. Temperature-dependent pyrolytic product evolution profile for polypropylene (pages 2318–2325)

      Ujwala Hujuri, Aloke K. Ghoshal and Sasidhar Gumma

      Version of Record online: 31 AUG 2010 | DOI: 10.1002/app.32904

    21. A novel conductivity composite based on polyaniline/zirconium phenylphosphonate (pages 2334–2338)

      Changhua Liu, Lina Zhu, Haixia Wu and Yajuan Yang

      Version of Record online: 31 AUG 2010 | DOI: 10.1002/app.32968

    22. Synthesis and characterization of high temperature resistance interpenetrating polymer network (pages 2339–2344)

      A. M. Kamalan Kirubaharan, S. Palraj, M. Selvaraj and G. Rajagopal

      Version of Record online: 1 SEP 2010 | DOI: 10.1002/app.32027

    23. Effect of supercritical CO2 on three-dimensional colloid arrays of PS-MA–EGDMA (pages 2393–2399)

      Zhimin Chen, Fengfeng Xue, Guannan Sun, Jiafu Chen and Qun Xu

      Version of Record online: 1 SEP 2010 | DOI: 10.1002/app.32955

    24. You have full text access to this OnlineOpen article
    25. Addition of α-tocopherol on poly(lactic acid): Thermal, mechanical, and sorption properties (pages 2468–2475)

      Carla M. B. Gonçalves, Liliana C. Tomé, João A. P. Coutinho and Isabel M. Marrucho

      Version of Record online: 1 SEP 2010 | DOI: 10.1002/app.32952

    26. Synthesis of diblock and triblock copolymers from butyl acrylate and styrene by reverse iodine transfer polymerization (pages 2476–2484)

      Francisco J. Enríquez-Medrano, Ramiro Guerrero-Santos, Martín Hernández-Valdez and Patrick Lacroix-Desmazes

      Version of Record online: 7 SEP 2010 | DOI: 10.1002/app.32759

  1. Erratum

    1. Top of page
    2. Erratum
    1. You have free access to this content
      High Density Polyethylene/Micro Calcium Carbonate Composites: A Study of the Morphological, Thermal, and Viscoelastic Properties (page 2494)

      Rabeh H. Elleithy, Ilias Ali, Muhammad Alhaj Ali and S. M. Al-Zahrani

      Version of Record online: 25 AUG 2010 | DOI: 10.1002/app.33064

      This article corrects:

SEARCH

SEARCH BY CITATION