Journal of Applied Polymer Science

Cover image for Vol. 123 Issue 1

5 January 2012

Volume 123, Issue 1

Pages 1–635

    1. Functionalization of polypropylene at high temperature under oxidative/inert environment (pages 1–11)

      Deepak B. Akolekar, Shubhangi Nair, Santosh Adsul and Sunil Virkar

      Article first published online: 25 JUL 2011 | DOI: 10.1002/app.34442

    2. Photopolymerization of 1-adamantyl acrylate pohotoinitiated by free radical photoinitiators (pages 26–31)

      Kemin Wang, Rong Cui, Juming Gu, Qiang Yu, Guiping Ma and Jun Nie

      Article first published online: 25 JUL 2011 | DOI: 10.1002/app.34496

    3. A novel highly efficient β-nucleating agent for isotactic polypropylene (pages 108–117)

      Shicheng Zhao, Na Xu, Zhong Xin and Changquan Jiang

      Article first published online: 26 JUL 2011 | DOI: 10.1002/app.34441

    4. Film processability and properties of polycaprolactone/thermoplastic starch blends (pages 179–190)

      Daniel E. Ramírez-Arreola, Jorge R. Robledo-Ortiz, Francisco Moscoso, Martín Arellano, Denis Rodrigue and Rubén González-Núñez

      Article first published online: 26 JUL 2011 | DOI: 10.1002/app.34444

    5. Nanocomposites based on ionene–bentonite used to treat oily water (pages 218–226)

      Claudia R. E. Mansur, Roberta S. Oliveira, Vanessa Akeda, Yure G. C. Queirós, Luciana S. Spinelli and Elizabete F. Lucas

      Article first published online: 26 JUL 2011 | DOI: 10.1002/app.34477

    6. Accelerated aging of elastomeric composites with vulcanized ground scraps (pages 280–285)

      Larissa N. Carli, Otávio Bianchi, Raquel S. Mauler and Janaina S. Crespo

      Article first published online: 27 JUL 2011 | DOI: 10.1002/app.33666

    7. Preparation and characterization of antifouling poly(vinylidene fluoride) blended membranes (pages 286–291)

      Hyoungwoo Choi, Youngnam Kwon, Yongdoo Jung, Sungpyo Hong and Taemoon Tak

      Article first published online: 27 JUL 2011 | DOI: 10.1002/app.33846

    8. Preparation and properties of acrylic melamine hard coating (pages 307–315)

      Go Nishino, Hideki Sugimoto and Eiji Nakanishi

      Article first published online: 27 JUL 2011 | DOI: 10.1002/app.33727

    9. Synthesis and degradation of agar-carbomer based hydrogels for tissue engineering applications (pages 398–408)

      Filippo Rossi, Xanthippi Chatzistavrou, Giuseppe Perale and Aldo R. Boccaccini

      Article first published online: 27 JUL 2011 | DOI: 10.1002/app.34488

    10. Evaluation of the confinement effect of nanoclay on the kinetics of styrene atom transfer radical polymerization (pages 409–417)

      Hossein Roghani-Mamaqani, Vahid Haddadi-Asl, Mohammad Najafi and Mehdi Salami-Kalajahi

      Article first published online: 27 JUL 2011 | DOI: 10.1002/app.34511

    11. Covulcanization of LLDPE/EMA blends using dicumyl peroxide (pages 502–509)

      Jyoti S. Borah, Kinsuk Naskar and Tapan K. Chaki

      Article first published online: 28 JUL 2011 | DOI: 10.1002/app.34472

    12. Chemical recycling of PET flakes into yarn (pages 520–525)

      Prasad S. Upasani, Ashwin K. Jain, Ninad Save, Uday S. Agarwal and Anil K. Kelkar

      Article first published online: 28 JUL 2011 | DOI: 10.1002/app.34503

    13. Effect of phase separation on spherulitic growth rate of PP/EPR in-reactor alloys (pages 535–542)

      Yi-Min Liu, Ying Li, Jun-Ting Xu, Zhi-Sheng Fu and Zhi-Qiang Fan

      Article first published online: 28 JUL 2011 | DOI: 10.1002/app.34478

    14. Chemical modification of hemp fibers by silane coupling agents (pages 601–610)

      Ali Rachini, Marianne Le Troedec, Claire Peyratout and Agnès Smith

      Article first published online: 28 JUL 2011 | DOI: 10.1002/app.34530

SEARCH

SEARCH BY CITATION