Journal of Applied Polymer Science

Cover image for Journal of Applied Polymer Science

Special Issue: Composites with Inorganic Fillers

25 July 2012

Volume 125, Issue S1

Pages E1–E724

  1. Editorial

    1. Top of page
    2. Editorial
    1. You have free access to this content
      Polymer composites in the spotlight (page E1)

      Stefano Tonzani

      Article first published online: 23 FEB 2012 | DOI: 10.1002/app.36954

    1. Surface modification of silica–PAN composite nanofibers induced by CO2-pulsed laser (pages E9–E15)

      M. Salehi Esfandarani, M. Johari, R. Amrollahi and M. Karimi

      Article first published online: 17 DEC 2011 | DOI: 10.1002/app.35559

    2. Rheological investigation on the interaction of polyamide 6 with clay (pages E27–E33)

      Tong Wan, Biao Wang, Shuang Liao and Mike Clifford

      Article first published online: 19 DEC 2011 | DOI: 10.1002/app.35554

    3. Hyperbranched polyurethane-urea-imide/o-clay-silica hybrids: Synthesis and characterization (pages E67–E75)

      Aswini K Mishra, Ramanuj Narayan, Tejraj M. Aminabhavi, S. K. Pradhan and K. V. S. N. Raju

      Article first published online: 27 DEC 2011 | DOI: 10.1002/app.34970

    4. Natural rubber nanocomposites with functionalized carbon nanotubes: Mechanical, dynamic mechanical, and morphology studies (pages E76–E84)

      Adedigba A. Abdullateef, Selvin P. Thomas, Mamdouh A. Al-Harthi, S. K. De, Sri Bandyopadhyay, A.A. Basfar and Muataz A. Atieh

      Article first published online: 27 DEC 2011 | DOI: 10.1002/app.35021

    5. Mineral kaolinite clay for preparation of nanocomposite hydrogels (pages E122–E130)

      M. Sirousazar, M. Kokabi, Z. M. Hassan and A. R. Bahramian

      Article first published online: 28 DEC 2011 | DOI: 10.1002/app.35095

    6. Characterization of ZnO/polyaniline nanocomposites prepared by using surfactant solutions as polymerization media (pages E141–E147)

      Kleber G. B. Alves, Jorlandio F. Felix, Etelino F. de Melo, Clécio G. dos Santos, Cesar A. S. Andrade and Celso P. de Melo

      Article first published online: 28 DEC 2011 | DOI: 10.1002/app.35502

    7. Influence of nanosilica on the morphology, thermal and mechanical properties of polyurethane elastomer (pages E181–E190)

      Sanja Lučić Blagojević, Zrinka Buhin, Anđela Pustak and Ružica Lukić Kovačić

      Article first published online: 29 DEC 2011 | DOI: 10.1002/app.36290

    8. Scalable process for the spinning of PVA–carbon nanotube composite fibers (pages E191–E196)

      Célia Mercader, Valérie Denis-Lutard, Simon Jestin, Maryse Maugey, Alain Derré, Cécile Zakri and Philippe Poulin

      Article first published online: 29 DEC 2011 | DOI: 10.1002/app.36308

    9. Nylon 6/clay nanocomposite filaments and their cords (pages E224–E234)

      M. Joshi, D. Biswas, A. Sarvanan, Roli Purwar and R. Mukhopadhaya

      Article first published online: 31 DEC 2011 | DOI: 10.1002/app.34796

    10. The influence of the surface character of the clays on the properties of poly(p-dioxanone)/fibrous clay nanocomposites (pages E247–E259)

      Zhi-Cheng Qiu, Jing-Jing Zhang, Cai-Li Huang, Ying Niu, Ke-Ke Yang and Yu-Zhong Wang

      Article first published online: 12 JAN 2012 | DOI: 10.1002/app.35040

    11. The effect of mixing process on linear viscoelastic and electrical properties of ABS/MWNT nanocomposites (pages E260–E267)

      Leila Mousavi, Hossein Nazockdast, Yousef Mohammadi, Hamed Azizi and Zahra Saleh

      Article first published online: 14 JAN 2012 | DOI: 10.1002/app.35497

    12. Preparation, morphology, and properties of conducting polyaniline-grafted multiwalled carbon nanotubes/epoxy composites (pages E334–E341)

      Jun Xu, Pei Yao, Zhongyi Jiang, Huijun Liu, Xuan Li, Litao Liu, Mei Li and Yingzhe Zheng

      Article first published online: 17 JAN 2012 | DOI: 10.1002/app.35677

    13. Interfacial enhancement of maleated polypropylene/silica composites using graphene oxide (pages E348–E357)

      Feng Luo, Li Chen, Nanying Ning, Ke Wang, Feng Chen and Qiang Fu

      Article first published online: 17 JAN 2012 | DOI: 10.1002/app.36224

    14. Structure development and melt viscoelastic properties of PE/organoclay nanocomposite blown films (pages E435–E444)

      Mehdi H. Abdolrasouli, Ehsan Behzadfar, Hossein Nazockdast and Farhad Sharif

      Article first published online: 22 JAN 2012 | DOI: 10.1002/app.36510

      Thumbnail image of graphical abstract
    15. Performance of poly(ehtylene-co-vinyl acetate) nanocomposites using distinct clays (pages E462–E470)

      Vinicios Pistor, Heitor Luiz Ornaghi Jr., Carlos Arthur Ferreira and Ademir José Zattera

      Article first published online: 29 JAN 2012 | DOI: 10.1002/app.34804

    16. Effect of clay concentration on the wear behavior and permeability of polypropylene/clay nanocomposites (pages E495–E502)

      María Fernanda Horst, Walter Tuckart, Liliana Del Blanco, Marcelo D. Failla and Lidia M. Quinzani

      Article first published online: 31 JAN 2012 | DOI: 10.1002/app.36414

    17. Effect of colloidal silica dispersions on the properties of PDMS-colloidal silica composites (pages E515–E522)

      Dinkar Sumi, A. Dhanabalan, B. H. S. Thimmappa and Sriram Krishnamurthy

      Article first published online: 1 FEB 2012 | DOI: 10.1002/app.36226

    18. High-velocity impact behavior of glass fiber-reinforced polyester filled with nanoclay (pages E583–E591)

      Javad Moftakharian Esfahani, Masoud Esfandeh and Ali Reza Sabet

      Article first published online: 2 FEB 2012 | DOI: 10.1002/app.36605

    19. The preparation, structures, and properties of poly(vinylidene fluoride)/multiwall carbon nanotubes nanocomposites (pages E592–E600)

      Xue-Gang Tang, Meng Hou, Lei Ge, Jin Zou, Rowan Truss, Wei Yang, Ming-Bo Yang, Zhong-Hua Zhu and Rui-Ying Bao

      Article first published online: 2 FEB 2012 | DOI: 10.1002/app.36671

    20. Preparation and properties of cellulose-based nano composites of clay and polypropylene (pages E651–E660)

      Jitendra K. Pandey, Sena Lee, Hyun-Joong Kim, Hitoshi Takagi, C.S. Lee and S.H. Ahn

      Article first published online: 7 FEB 2012 | DOI: 10.1002/app.34546

    21. Improvements in barrier properties of poly(lactic acid) films coated with chitosan or chitosan/clay nanocomposite (pages E675–E680)

      Seok-Hoon Park, Hyun Soo Lee, Jae Hoon Choi, Chang Myeong Jeong, Myoung Hwan Sung and Hyun Jin Park

      Article first published online: 7 FEB 2012 | DOI: 10.1002/app.36405

    22. You have full text access to this OnlineOpen article