Journal of Applied Polymer Science

Cover image for Vol. 125 Issue 5

5 September 2012

Volume 125, Issue 5

Pages 3313–4148

    1. Effect of oxidation progress of tributylborane on the grafting of polyolefins (pages 3335–3344)

      Shujuan Liu, Zhen Zheng, Minrui Li and Xinling Wang

      Article first published online: 3 FEB 2012 | DOI: 10.1002/app.34232

    2. A comparative study of two polyelectrolyte complexes (pages 3345–3350)

      Oscar Valdés, Larissa Alexandrova, Dionisio Zaldívar and Issa Katime

      Article first published online: 3 FEB 2012 | DOI: 10.1002/app.36404

      Thumbnail image of graphical abstract
    3. Preparation and characterization of nanoparticle-filled, mixed-matrix membranes for the pervaporation dehydration of isopropyl alcohol (pages 3351–3360)

      C. Venkata Prasad, B. Yeriswamy, H. Sudhakar, P. Sudhakara, M. C. S. Subha, J. I. Song and K.Chowdoji Rao

      Article first published online: 3 FEB 2012 | DOI: 10.1002/app.35658

    4. Study of the dimensional instabilities of laminated polypropylene films during heating treatments (pages 3385–3395)

      M. Ponçot, J. Martin, J. M. Hiver, D. Verchère and A. Dahoun

      Article first published online: 3 FEB 2012 | DOI: 10.1002/app.36450

    5. Poly(2-aminobiphenyl), preparation, characterization, mechanism, and kinetics of the electropolymerization process (pages 3410–3418)

      Waheed A. Badawy, Khaled M. Ismail, Ziad M. Khalifa and Shymaa S. Medany

      Article first published online: 3 FEB 2012 | DOI: 10.1002/app.36621

    6. Preparation of PBAS core-shell structured polymer by seeded emulsion polymerization and investigation in AS resin toughness (pages 3419–3428)

      Haiyan Zhao, Xinran Liu, Nian Fu, Qingxin Zhang, Nongyue Wang, Lianqi He and Xiongwei Qu

      Article first published online: 3 FEB 2012 | DOI: 10.1002/app.36614

    7. Glycerol citrate polyesters produced through heating without catalysis (pages 3429–3437)

      Brent Tisserat, Rogers Harry O'kuru, HongSik Hwang, Abdellatif A. Mohamed and Ronald Holser

      Article first published online: 5 FEB 2012 | DOI: 10.1002/app.36669

      Thumbnail image of graphical abstract
    8. Removal of toxic metal ions by using composite cation-exchange material (pages 3438–3446)

      S. A. Nabi, Rani Bushra and Mohammad Shahadat

      Article first published online: 6 FEB 2012 | DOI: 10.1002/app.36325

    9. Conducting stability of nickel-coated graphite/methyl vinyl silicone rubber composites (pages 3456–3462)

      Hua Zou, Shani Yan, Yebin Sun, Liqun Zhang and Ming Tian

      Article first published online: 7 FEB 2012 | DOI: 10.1002/app.36532

    10. Effect of amine-terminated butadiene-acrylonitrile/clay combinations on the structure and properties of epoxy nanocomposites (pages 3477–3483)

      Ivan Kelnar, Jakub Rotrekl, Ludmila Kaprálková, Jiřina Hromádková and Adam Strachota

      Article first published online: 17 FEB 2012 | DOI: 10.1002/app.36696

      Thumbnail image of graphical abstract
    11. Characterization of radiation-grafted polymer films using CP/MAS NMR spectroscopy and confocal Raman microscopy (pages 3500–3508)

      Frank Wallasch, Matthias Abele, Lorenz Gubler, Alexander Wokaun, Klaus Müller and Günther G. Scherer

      Article first published online: 18 FEB 2012 | DOI: 10.1002/app.36675

      Thumbnail image of graphical abstract
    12. Solid-phase extraction of S-(-)-amlodipine from plasma with a uniformly sized molecularly imprinted polymer (pages 3524–3531)

      Kaixia Luo, Meng Liu, Qiang Fu, Elijan Amut, Aiguo Zeng and Chun Chang

      Article first published online: 20 FEB 2012 | DOI: 10.1002/app.36391

    13. Synthesis and characterization of MQ silicone resins (pages 3532–3536)

      Fang Sun, Yanli Hu and Hong-Guang Du

      Article first published online: 20 FEB 2012 | DOI: 10.1002/app.35194

    14. Synergistic antimicrobial effects of polyaniline combined with silver nanoparticles (pages 3560–3566)

      Qingming Jia, Shaoyun Shan, Lihong Jiang, Yaming Wang and Dan Li

      Article first published online: 20 FEB 2012 | DOI: 10.1002/app.36257

    15. Synergy of magnesium and calcium oxides in intumescent flame-retarded polypropylene (pages 3567–3574)

      Zhi-Ling Ma, Cong-Ran Fan, Guang-Yu Lu, Xiu-Ying Liu and Hong Zhang

      Article first published online: 20 FEB 2012 | DOI: 10.1002/app.36227

    16. Effect of cobalt-60 γ radiation on the physical and chemical properties of poly(ethylene terephthalate) polymer (pages 3575–3581)

      Siddhartha, Suveda Aarya, Kapil Dev, Mohd Shakir, Bashir Ahmed and M. A. Wahab

      Article first published online: 20 FEB 2012 | DOI: 10.1002/app.36397

    17. Production and characterization of hybrid BEH-PPV/PEO conjugated polymer nanofibers by forcespinning™ (pages 3610–3616)

      Simon Padron, Richard Patlan, Jose Gutierrez, Nestor Santos, Thomas Eubanks and Karen Lozano

      Article first published online: 20 FEB 2012 | DOI: 10.1002/app.36420

    18. Electrospun fibers from functional polyglycidol/poly(ε-caprolactone) blends with defined surface properties (pages 3638–3647)

      D. Haamann, M. Bispinghoff, D. Hönders, C. Suschek, M. Möller and D. Klee

      Article first published online: 20 FEB 2012 | DOI: 10.1002/app.36472

      Thumbnail image of graphical abstract
    19. Finite element modeling of the flow of a rubber compound through an axisymmetric die using the CEF viscoelastic constitutive equation (pages 3648–3657)

      Mir Hamid Reza Ghoreishy, Mojtaba Bagheri-Jaghargh, Ghasem Naderi and Sedigheh Soltani

      Article first published online: 20 FEB 2012 | DOI: 10.1002/app.36482

      Thumbnail image of graphical abstract
    20. Soybean meal-based adhesive enhanced by MUF resin (pages 3676–3681)

      Qiang Gao, Sheldon Q. Shi, Shifeng Zhang, Jianzhang Li, Xiaomei Wang, Wubin Ding, Kaiwen Liang and Jinwu Wang

      Article first published online: 20 FEB 2012 | DOI: 10.1002/app.36700

      Thumbnail image of graphical abstract
    21. Investigation of the curing process of spray polyurea elastomer by FTIR, DSC, and DMA (pages 3695–3701)

      Qing Zhou, Li Cao, Qing Li, Yalin Yao, Zhaofei Ouyang, Zhiqiang Su and Xiaonong Chen

      Article first published online: 20 FEB 2012 | DOI: 10.1002/app.36674

      Thumbnail image of graphical abstract
    22. Electrocatalytic performance of Pt supported on polyaniline-poly(styrene sulfonate) hydrogel (pages 3702–3707)

      Yujie Jia, Jianchun Jiang, Kang Sun and Tingyang Dai

      Article first published online: 20 FEB 2012 | DOI: 10.1002/app.36712

      Thumbnail image of graphical abstract
    23. Energy transfer and photoactivity of photozymes included in polyacrylate hydrogels (pages 3721–3729)

      L. Sorochynska, S. Grishchuk, S. Korres, C. Riehn, G. Niedner-Schatteburg, V. Georgieva, G. Georgiev and J. Karger-Kocsis

      Article first published online: 21 FEB 2012 | DOI: 10.1002/app.36583

      Thumbnail image of graphical abstract
    24. Development and characterization of a novolac resin/BaTiO3 nanoparticles composite system (pages 3737–3744)

      I. Asimakopoulos, L. Zoumpoulakis and G. C. Psarras

      Article first published online: 24 FEB 2012 | DOI: 10.1002/app.36518

      Thumbnail image of graphical abstract
    25. Processing and tribology of thermoplastic polyurethane particulate composite materials (pages 3745–3754)

      B. Golaz, S. Tetouani, N. Diomidis, V. Michaud and S. Mischler

      Article first published online: 24 FEB 2012 | DOI: 10.1002/app.36543

      Thumbnail image of graphical abstract
    26. Effect of the manufacturing conditions on the structure and performance of thin-film composite membranes (pages 3755–3769)

      Rui-Xin Zhang, Johan Vanneste, Lore Poelmans, Arcadio Sotto, Xiao-Lin Wang and Bart Van der Bruggen

      Article first published online: 24 FEB 2012 | DOI: 10.1002/app.36542

      Thumbnail image of graphical abstract
    27. Evaluation of the complex hygrothermal behaviors of epoxy–amine systems (pages 3778–3787)

      Sungwon Choi, Andrea Phantu and Elliot P. Douglas

      Article first published online: 24 FEB 2012 | DOI: 10.1002/app.36539

      Thumbnail image of graphical abstract
    28. The effect of absorbed moisture on dielectric behavior of silica (micro)-unsaturated polyester composites (pages 3788–3793)

      Ram A. Sharma, Dawid D'Melo, L. Chaudhari, S. Bhattacharya, Rajiv Gawande and Gopal S. Patil

      Article first published online: 24 FEB 2012 | DOI: 10.1002/app.36702

    29. Preparation and properties of carbon black filled EPDM/POE thermaplastic vulcanizates (pages 3794–3801)

      Xiu Feng Lv, Bao Sheng Zhang and Gui Xue Qiu

      Article first published online: 25 FEB 2012 | DOI: 10.1002/app.33693

    30. The effect of titania content on the physical properties of polyimide/titania nanohybrid films (pages 3802–3810)

      Canan Kızılkaya, Fatih Dumludağ, Sevim Karataş, Nilhan Kayaman Apohan, Ahmet Altındal and Atilla Güngör

      Article first published online: 25 FEB 2012 | DOI: 10.1002/app.35292

    31. Effect of curing behaviors on the properties of poly(arylene ether nitrile) end-capped with phthalonitrile (pages 3829–3835)

      Yanke Zou, Jian Yang, Yingqing Zhan, Xulin Yang, Jiachun Zhong, Rui Zhao and Xiaobo Liu

      Article first published online: 25 FEB 2012 | DOI: 10.1002/app.36691

      Thumbnail image of graphical abstract
    32. Cholesteric monomer and elastomers containing menthyl groups: Synthesis and phase behavior (pages 3849–3855)

      Jian-She Hu, Dan Li, Qing-Bao Meng and Dan-Shu Yao

      Article first published online: 25 FEB 2012 | DOI: 10.1002/app.36701

      Thumbnail image of graphical abstract
    33. Accelerated and real-time creep and creep-rupture results for aramid fibers (pages 3856–3870)

      Ioannis P. Giannopoulos and Chris J. Burgoyne

      Article first published online: 25 FEB 2012 | DOI: 10.1002/app.36707

      Thumbnail image of graphical abstract
    34. A comparative study of TiO2 and surface-treated TiO2 nanoparticles on thermal and mechanical properties of poly(ε-caprolactone) nanocomposites (pages 3871–3879)

      Guangshuo Wang, Guangyi Chen, Zhiyong Wei, Teng Yu, Lian Liu, Pei Wang, Ying Chang and Min Qi

      Article first published online: 25 FEB 2012 | DOI: 10.1002/app.36720

      Thumbnail image of graphical abstract
    35. Isothermal and nonisothermal crystallization of HDPE composites containing multilayer carton scraps as filler (pages 3880–3887)

      Maria Laura Di Lorenzo, Maurizio Avella, Roberto Avolio, Irene Bonadies, Cosimo Carfagna, Mariacristina Cocca, Maria Emanuela Errico and Gennaro Gentile

      Article first published online: 25 FEB 2012 | DOI: 10.1002/app.36713

      Thumbnail image of graphical abstract
    36. Preparation and characterization of polysulfone–cyclodextrin composite nanofiltration membrane: Solvent effect (pages 3888–3898)

      Kundan Baruah, Swapnali Hazarika, Somiron Borthakur and Narendra Nath Dutta

      Article first published online: 25 FEB 2012 | DOI: 10.1002/app.36711

      Thumbnail image of graphical abstract
    37. One-pot in situ ball milling preparation of polymer/graphene nanocomposites (pages 3899–3903)

      Hang Wu, Weifeng Zhao and Guohua Chen

      Article first published online: 28 FEB 2012 | DOI: 10.1002/app.35413

      Thumbnail image of graphical abstract
    38. Synthesis and characterization of novel aromatic poly(ester amide)s containing pendant trifluoromethylphenoxy groups (pages 3904–3912)

      Yong-Jun Liu, Xue-Liang Pei, Shou-Ri Sheng, Fang Yang, Xiao-Ling Liu and Cai-Sheng Song

      Article first published online: 28 FEB 2012 | DOI: 10.1002/app.35445

      Thumbnail image of graphical abstract
    39. Synthesis and chemical modification of new luminescent substituted poly(p-phenylene) polymers (pages 3913–3919)

      Mejed Chemli, Ayoub Haj Said, Jean-Louis Fave, Carlos Barthou and Mustapha Majdoub

      Article first published online: 28 FEB 2012 | DOI: 10.1002/app.36315

      Thumbnail image of graphical abstract
    40. Natural rubber/multiwalled carbon nanotube composites developed with a combined self-assembly and latex compounding technique (pages 3920–3928)

      Zheng Peng, Chunfang Feng, Yongyue Luo, Yongzhen Li, Zhifeng Yi and L.X. Kong

      Article first published online: 29 FEB 2012 | DOI: 10.1002/app.36389

      Thumbnail image of graphical abstract
    41. Epoxy hybrid composites cured with octaaminophenyl polyhedral oligomeric silsesquioxane (pages 3929–3935)

      Guang-Xin Chen, Lingxia Si, Peng Lu and Qifang Li

      Article first published online: 29 FEB 2012 | DOI: 10.1002/app.36400

      Thumbnail image of graphical abstract
    42. Effects of thiophene units on substituted benzothiadiazole and benzodithiophene copolymers for photovoltaic applications (pages 3936–3945)

      Ping Ding, Yingping Zou, Cheng-Che Chu, Dequan Xiao and Chain-Shu Hsu

      Article first published online: 29 FEB 2012 | DOI: 10.1002/app.36541

      Thumbnail image of graphical abstract
    43. Fatigue damage initiation of a PA66/glass fibers composite material (pages 4007–4014)

      B. Esmaeillou, P. Fereirra, V. Bellenger and A. Tcharkhtchi

      Article first published online: 6 MAR 2012 | DOI: 10.1002/app.36728

      Thumbnail image of graphical abstract
    44. Micronization of polyethylene terephthalate via freezing of highly sheared emulsions of polyethylene terephthalate in saturated liquid tetrahydrofuran (pages 4034–4040)

      D. Tapriyal, X. Fan, Y. Heintz, B. Morsi, E. Beckman, R. Enick, A. Sane, M. Thies, G. Schutte and J. Niederst

      Article first published online: 6 MAR 2012 | DOI: 10.1002/app.36730

      Thumbnail image of graphical abstract
    45. Evaluation of thermal and mechanical properties of rubber compositions based on SBR extended with safe oils (pages 4074–4081)

      Marcia C. Delpech, Ivana L. Mello, Fernanda C. S. Delgado and Jurandir M. Sousa

      Article first published online: 8 MAR 2012 | DOI: 10.1002/app.35560

    46. Revisiting the thermal relaxations of poly(vinyl alcohol) (pages 4082–4090)

      J. Betzabe Gonzalez-Campos, Zaira Y. Garcia-Carvajal, E. Prokhorov, J. Gabriel Luna-Barcenas, M. E. Mendoza-Duarte, Javier Lara-Romero, Rosa E. del Rio and Isaac C. Sanchez

      Article first published online: 15 MAR 2012 | DOI: 10.1002/app.33615

      Thumbnail image of graphical abstract
    47. Preparation and characterization of electrospun polyurethane–polypyrrole nanofibers and films (pages 4100–4108)

      Meltem Yanilmaz, Fatma Kalaoglu, Hale Karakas and A. Sezai Sarac

      Article first published online: 15 MAR 2012 | DOI: 10.1002/app.36386

    48. Effect of nanoclay type on dyeability of polyethylene terephthalate/clay nanocomposites (pages 4109–4120)

      Mazeyar Parvinzadeh Gashti and Siamak Moradian

      Article first published online: 15 MAR 2012 | DOI: 10.1002/app.35493

    49. Surface modification of siloxane containing polyurethane polymer by dielectric barrier discharge at atmospheric pressure (pages 4121–4127)

      K. G. Kostov, A. L. R. dos Santos, P. A. P. Nascente, M. E. Kayama, R. P. Mota and M. A. Algatti

      Article first published online: 15 MAR 2012 | DOI: 10.1002/app.35290

    50. Synthesis of monodispersed polyacrylonitrile microspheres by dispersion polymerization (pages 4142–4148)

      Zhe Zhang, Wei Jiang, Yunjie Wang, Yichun Wu and Xin Hou

      Article first published online: 22 MAR 2012 | DOI: 10.1002/app.36407

SEARCH

SEARCH BY CITATION