Journal of Applied Polymer Science

Copyright © 2013 Wiley Periodicals, Inc., A Wiley Company

Cover image for Journal of Applied Polymer Science

11 April 2003

Volume 88, Issue 2

Pages 245–594

    1. Effect of the addition mode of cycloaliphatic diepoxide on the morphology and film properties of crosslinkable core-shell latex (pages 245–257)

      Ganghua Teng, Mark D. Soucek, Xiaofan F. Yang and Dennis E. Tallman

      Article first published online: 4 FEB 2003 | DOI: 10.1002/app.11682

    2. Improvement of adhesion between polyaniline and ion-assisted-reaction-treated polypropylene (pages 258–265)

      Cheol-Su Lee, Sung Han, Young-Whoan Beag, Jin-Soo Joo and Seok-Keun Koh

      Article first published online: 4 FEB 2003 | DOI: 10.1002/app.11666

    3. Effect of styrene–isoprene–styrene, styrene–butadiene–styrene, and styrene–butadiene–rubber on the mechanical, thermal, rheological, and morphological properties of polypropylene/polystyrene blends (pages 266–277)

      P. Raghu, C. K. Nere and R. N. Jagtap

      Article first published online: 4 FEB 2003 | DOI: 10.1002/app.11677

    4. Surface of cellulosic materials modified with functionalized polyethylene coupling agents (pages 278–286)

      Qingxiu Li and Laurent M. Matuana

      Article first published online: 4 FEB 2003 | DOI: 10.1002/app.11681

    5. Low addition of melamine salts for improved melamine-urea-formaldehyde adhesive water resistance (pages 287–292)

      M. Zanetti and A. Pizzi

      Article first published online: 4 FEB 2003 | DOI: 10.1002/app.11687

    6. Preparation and solid-state nuclear magnetic resonance characterization a styrene/butadiene/acrylonitrile (ABS)/poly(vinyl chloride) (PVC)/gypsum ternary system (pages 293–296)

      Edemilsom P. da Silva, Maria Auxiliadora C. Kaplan and Maria Inês B. Tavares

      Article first published online: 4 FEB 2003 | DOI: 10.1002/app.11707

    7. Effects of an organic phosphorus nucleating agent on crystallization behaviors and mechanical properties of poly(propylene) (pages 297–301)

      Quande Gui, Zhong Xin, Weiping Zhu and Gance Dai

      Article first published online: 4 FEB 2003 | DOI: 10.1002/app.11708

    8. Structural characterization of oligomers from the polycondensation of citric acid with ethylene glycol and long-chain aliphatic alcohols (pages 302–306)

      Fabienne Barroso-Bujans, Ricardo Martínez and Pedro Ortiz

      Article first published online: 4 FEB 2003 | DOI: 10.1002/app.11664

    9. Poly(phenylene oxide)-based polymer electrolyte membranes for fuel-cell applications (pages 307–311)

      K. Ramya and K. S. Dhathathreyan

      Article first published online: 4 FEB 2003 | DOI: 10.1002/app.11665

    10. The characteristic properties of poly(methyl methacrylate)/polystyrene core-shell composite polymer latex (pages 312–321)

      Chia-Fen Lee

      Article first published online: 4 FEB 2003 | DOI: 10.1002/app.11633

    11. Gelatin/montmorillonite hybrid nanocomposite. II. Swelling behavior (pages 322–326)

      Ping Li, Jun Ping Zheng, Ya Lu Ma and Kang De Yao

      Article first published online: 4 FEB 2003 | DOI: 10.1002/app.11689

    12. Kinetic study on the reaction of 2,4- and 2,6-tolylene diisocyanate with 1-butanol in the presence of styrene, as a model reaction for the process that yields interpenetrating polyurethane–polyester networks (pages 327–336)

      Piotr Król and Joanna Wojturska

      Article first published online: 4 FEB 2003 | DOI: 10.1002/app.11692

    13. Novel cellulose ester–poly(furfuryl alcohol)–flax fiber biocomposites (pages 337–345)

      G. Toriz, R. Arvidsson, M. Westin and P. Gatenholm

      Article first published online: 4 FEB 2003 | DOI: 10.1002/app.11730

    14. Polyelectrolyte complex formation between alginate and chitosan as a function of pH (pages 346–351)

      Fatma A. Simsek-Ege, Gillian M. Bond and John Stringer

      Article first published online: 5 FEB 2003 | DOI: 10.1002/app.11989

    15. Complexation of uranyl ions by polypyrrole doped by sulfonated and phosphonated polyethyleneimine (pages 352–359)

      D. Leroy, L. Martinot, P. Mignonsin, D. Strivay, G. Weber, C. Jérôme and R. Jérôme

      Article first published online: 4 FEB 2003 | DOI: 10.1002/app.12028

    16. Heterogeneous nucleation of nylon 6 and PET with selected inorganic compounds (pages 360–368)

      D. G. Martínez-Vázquez, F. J. Medellín-Rodríguez, P. J. Phillips and S. Sanchez-Valdes

      Article first published online: 4 FEB 2003 | DOI: 10.1002/app.12041

    17. Synthesis of polyaniline using horseradish peroxidase immobilized on plasma-functionalized polyethylene surfaces as initiator (pages 369–379)

      S. Alvarez, S. Manolache and F. Denes

      Article first published online: 4 FEB 2003 | DOI: 10.1002/app.11511

    18. Polyurethanes: Products of 4,4′-bis(6-hydroxyhexylthio)diphenyl ether and methylene bis(4-phenyl isocyanate) (pages 380–388)

      Danuta Wdowicka, Wawrzyniec Podkościelny and Magdalena Rogulska

      Article first published online: 4 FEB 2003 | DOI: 10.1002/app.11650

    19. Deposition of poly(diphenylamine-co-o-chloroaniline) by pulse potentiostatic method: Growth equation and characterization (pages 389–397)

      V. Rajendran, A. Gopalan, R. Buvaneswari, T. Vasudevan and Ten-Chin Wen

      Article first published online: 4 FEB 2003 | DOI: 10.1002/app.11693

    20. Studies on polyamide-6/polyolefin blend system compatibilized with epoxidized natural rubber (pages 398–403)

      Bang-hu Xie, Ming-bo Yang, Si-dong Li, Zhong-ming Li and Jian-min Feng

      Article first published online: 4 FEB 2003 | DOI: 10.1002/app.11695

    21. DVD substrate application for polycarbonate end-capped with 4-α-cumylphenol (pages 404–406)

      Masaya Okamoto

      Article first published online: 4 FEB 2003 | DOI: 10.1002/app.11728

    22. Properties of soy protein isolate/poly(ethylene-co-ethyl acrylate-co-maleic anhydride) blends (pages 407–413)

      Zhikai Zhong and Susan X. Sun

      Article first published online: 4 FEB 2003 | DOI: 10.1002/app.11714

    23. Removal of heavy metal ions using the chelating polymers derived by the condensation of poly(3-hydroxy-4-acetylphenyl methacrylate) with different diamines (pages 414–421)

      K. Hussain Reddy and A. Ravikumar Reddy

      Article first published online: 4 FEB 2003 | DOI: 10.1002/app.11717

    24. Ways of strengthening biodegradable soy-dreg plastics (pages 422–427)

      Lina Zhang, Pu Chen, Jin Huang, Guang Yang and Lianshuang Zheng

      Article first published online: 4 FEB 2003 | DOI: 10.1002/app.11718

    25. Preparation of micrometer-sized, monodisperse, magnetic polymer particles (pages 428–433)

      M. Okubo, H. Minami and T. Komura

      Article first published online: 5 FEB 2003 | DOI: 10.1002/app.11720

    26. Comparative analysis of ultrasonically devulcanized unfilled SBR, NR, and EPDM rubbers (pages 434–441)

      Jushik Yun, Avraam I. Isayev, Seok H. Kim and Mayuresh Tapale

      Article first published online: 5 FEB 2003 | DOI: 10.1002/app.11741

    27. You have free access to this content
      Review on the development of defect-free and ultrathin-skinned asymmetric membranes for gas separation through manipulation of phase inversion and rheological factors (pages 442–451)

      Ahmad Fauzi Ismail and Lai Ping Yean

      Article first published online: 5 FEB 2003 | DOI: 10.1002/app.11744

    28. Analysis of the cure reaction of carbon nanotubes/epoxy resin composites through thermal analysis and Raman spectroscopy (pages 452–458)

      D. Puglia, L. Valentini and J. M. Kenny

      Article first published online: 5 FEB 2003 | DOI: 10.1002/app.11745

    29. Effect of film draw temperature (FDT) on physical properties of polyethylene (pages 459–465)

      A. A. Basfar and K. M. Idriss Ali

      Article first published online: 5 FEB 2003 | DOI: 10.1002/app.11747

    30. Ethylene polymerization with a silica-supported iron-based diimine catalyst (pages 466–469)

      Zhi Ma, Yucai Ke, Hang Wang, Cunyue Guo, Mingge Zhang, Wen-Hua Sun and Youliang Hu

      Article first published online: 5 FEB 2003 | DOI: 10.1002/app.11749

    31. Modification of aqueous acrylic–polyurethane via epoxy resin postcrosslinking (pages 470–475)

      Yuanchang Shi, Youshi Wu and Zhiqian Zhu

      Article first published online: 5 FEB 2003 | DOI: 10.1002/app.11750

    32. Iron(II)-based catalysts for ethene oligomerization (pages 476–482)

      Roland Schmidt, Ulrich Hammon, Stefan Gottfried, M. Bruce Welch and Helmut G. Alt

      Article first published online: 5 FEB 2003 | DOI: 10.1002/app.11751

    33. Preparation of composite particles made from solid powders and wasted plastics by semichemical recycle method (pages 483–488)

      Yoshinari Taguchi and Masto Tanaka

      Article first published online: 5 FEB 2003 | DOI: 10.1002/app.11920

    34. Preparation and anticoagulant property of phosphorylcholine-terminated o-benzoylchitosan derivative (pages 489–493)

      Aiping Zhu, Jun Zhang and Jian Shen

      Article first published online: 5 FEB 2003 | DOI: 10.1002/app.11755

    35. Effect of concentration and pH of solutions on the absorbency of polyacrylate superabsorbents (pages 494–499)

      Hongmei Kang and Jianjun Xie

      Article first published online: 5 FEB 2003 | DOI: 10.1002/app.11756

    36. Measurement and numerical simulation of three-dimensional fiber orientation states in injection-molded short-fiber-reinforced plastics (pages 500–509)

      Kwang Seok Lee, Seok Won Lee, Kwansoo Chung, Tae Jin Kang and Jae Ryoun Youn

      Article first published online: 5 FEB 2003 | DOI: 10.1002/app.11757

    37. Modeling of the transient viscosity for polymer melts after startup of shearing and elongational deformations (pages 510–515)

      Yongsok Seo

      Article first published online: 5 FEB 2003 | DOI: 10.1002/app.11754

    38. Structural properties of CrF3- and MnCl2-filled poly(vinylalcohol) films (pages 516–521)

      H. M. Zidan

      Article first published online: 5 FEB 2003 | DOI: 10.1002/app.12044

    39. Surface modification of polybutadiene facilitated by supercritical carbon dioxide (pages 522–530)

      Truc T. Ngo, Jonathan McCarney, James S. Brown, Michael J. Lazzaroni, Karl Counts, Charles L. Liotta and Charles A. Eckert

      Article first published online: 5 FEB 2003 | DOI: 10.1002/app.12069

    40. Effects of dowels produced from various materials on withdrawal strength in MDF and Pb (pages 531–535)

      Burhanettin Uysal and Ayhan Özçifçi

      Article first published online: 5 FEB 2003 | DOI: 10.1002/app.11700

    41. Effects of irradiation on the melting and crystallization behavior of ethylene polymers with different thermal history (pages 536–544)

      Hongxiang Teng, Wenfei Dong, Yi Shi and Xigao Jin

      Article first published online: 5 FEB 2003 | DOI: 10.1002/app.11726

    42. Estimating crystallinity in high density polyethylene fibers using online Raman spectroscopy (pages 545–549)

      R. P. Paradkar, S. S. Sakhalkar, X. He and M. S. Ellison

      Article first published online: 5 FEB 2003 | DOI: 10.1002/app.11719

    43. Effect of stress state and polymer morphology on environmental stress cracking in polycarbonate (pages 550–564)

      Arun Raman, Richard J. Farris and Alan J. Lesser

      Article first published online: 5 FEB 2003 | DOI: 10.1002/app.11791

    44. Polymerization behavior of an organophosphorus monomer for use in dental restorative materials (pages 565–569)

      Gabriel Adusei, Sanjukta Deb, John W. Nicholson, Liyuan Mou and Gurdial Singh

      Article first published online: 5 FEB 2003 | DOI: 10.1002/app.11437

    45. Synthesis, characterization, and metal ion uptake studies of chelating resins derived from formaldehyde/furfuraldehyde condensed phenolic schiff base of 4,4′-diaminodiphenylmethane and o-hydroxyacetophenone (pages 570–581)

      S. Samal, S. Acharya, R. K. Dey and A. R. Ray

      Article first published online: 5 FEB 2003 | DOI: 10.1002/app.11715

    46. Modification of phenol–formaldehyde resol resins by lignin, starch, and urea (pages 582–588)

      Marko Turunen, Leila Alvila, Tuula T. Pakkanen and Jouni Rainio

      Article first published online: 5 FEB 2003 | DOI: 10.1002/app.11776

    47. Spectroscopic behavior of poly(vinyl alcohol) films with different molecular weights after UV irradiation, thermal annealing, and double treatment with UV irradiation and thermal annealing (pages 589–594)

      Kamal M. Abd El-Kader

      Article first published online: 5 FEB 2003 | DOI: 10.1002/app.11743

SEARCH

SEARCH BY CITATION