Journal of Applied Polymer Science

Copyright © 2012 Wiley Periodicals, Inc., A Wiley Company

Cover image for Journal of Applied Polymer Science

5 February 2006

Volume 99, Issue 3

Pages 613–1301

    1. Graft copolymerization of glycidylmethacrylate onto modified nylon-6 fibers (pages 613–618)

      S. E. Shalaby, N. G. Al-Balakocy and S. M. Abo El-Ola

      Article first published online: 8 NOV 2005 | DOI: 10.1002/app.21911

    2. Polyacrylonitrile-grafted Cassia pudibunda seed gum: A potential commercial gum from renewable source (pages 619–627)

      Vandana Singh

      Article first published online: 8 NOV 2005 | DOI: 10.1002/app.22189

    3. Propylene polymerization using combined syndio- and isospecific metallocene catalysts supported on silica/MAO (pages 628–637)

      Maria De Fátima Vieira Marques and Anunciata Conte

      Article first published online: 8 NOV 2005 | DOI: 10.1002/app.22267

    4. An ESR study of the radiolysis of semi-crystalline ethylene-propylene copolymers containing DOP mobilizer (pages 638–643)

      Mohammad Fuzail, David J. T. Hill and Tri T. Le

      Article first published online: 8 NOV 2005 | DOI: 10.1002/app.22398

    5. Vinyl ester resin modified with silicone-based additives: II. Flammability properties (pages 644–649)

      Cristiana A. Ittner Mazali and Maria Isabel Felisberti

      Article first published online: 8 NOV 2005 | DOI: 10.1002/app.22496

    6. Charge storage behavior of isotropic and biaxially-oriented polypropylene films containing α- and β-nucleating agents (pages 650–658)

      Nico Behrendt, Nils Mohmeyer, Joachim Hillenbrand, Martin Klaiber, Xiaoqing Zhang, Gerhard M. Sessler, Hans-Werner Schmidt and Volker Altstädt

      Article first published online: 8 NOV 2005 | DOI: 10.1002/app.22502

    7. Preparation of spherical nanocomposites consisting of silica core and polyacrylate shell by emulsion polymerization (pages 659–669)

      Tsutomu Mizutani, Koji Arai, Masatoshi Miyamoto and Yoshiharu Kimura

      Article first published online: 8 NOV 2005 | DOI: 10.1002/app.22503

    8. Melting, nonisothermal crystallization behavior and morphology of polypropylene/random ethylene—propylene copolymer blends (pages 670–678)

      Dong Wang and Jungang Gao

      Article first published online: 8 NOV 2005 | DOI: 10.1002/app.22507

    9. Correlation between viscoelastic behavior and cooling stresses in a cured epoxy resin system (pages 679–690)

      V. Nassiet, J. P. Habas, B. Hassoune-Rhabbour, Y. Baziard and J. A. Petit

      Article first published online: 8 NOV 2005 | DOI: 10.1002/app.22540

    10. Influence of polymer–filler interactions on retraction behaviors of natural rubber vulcanizates reinforced with silica and carbon black (pages 691–696)

      Sung-Seen Choi

      Article first published online: 8 NOV 2005 | DOI: 10.1002/app.22562

    11. Metal ion retention properties of water-insoluble polymers containing carboxylic acid groups (pages 697–705)

      Bernabé L. Rivas, Benita Quilodrán and Eduardo Quiroz

      Article first published online: 8 NOV 2005 | DOI: 10.1002/app.22563

    12. Resins with the ability to bind copper and uranyl ions (pages 706–711)

      Bernabé L. Rivas, Eduardo Pereira, Miguel Jara and Carolina Esparza

      Article first published online: 8 NOV 2005 | DOI: 10.1002/app.22564

    13. Further investigation of polyaminoamide-epichlorohydrin/stearic anhydride compatibilizer system for wood-polyethylene composites (pages 712–718)

      Y. Geng, K. Li and J. Simonsen

      Article first published online: 8 NOV 2005 | DOI: 10.1002/app.22565

    14. Preparation and properties of borosiloxane gels (pages 719–724)

      Qian Wang, Liying Fu, Xiaowen Hu, Zhijie Zhang and Zemin Xie

      Article first published online: 11 NOV 2005 | DOI: 10.1002/app.21974

    15. Structure and barrier property of acrylatemethacrylate film coating in aspirin microcapsules (pages 725–727)

      F. E. Eichie, R. S. Okor and R. Groning

      Article first published online: 11 NOV 2005 | DOI: 10.1002/app.22176

    16. Synthesis of multi-arm star polystyrene with hyperbranched polyester initiators by atom transfer radical polymerization (pages 728–733)

      Guohua Jiang, Li Wang, Tao Chen, Chang Chen and Haojie Yu

      Article first published online: 11 NOV 2005 | DOI: 10.1002/app.22191

    17. Study on the surface grafting of polypropylene fibers (pages 734–737)

      W. Wang, L. Wang, C. L. Wang, T. X. Sun, H. J. Yu and T. Chen

      Article first published online: 11 NOV 2005 | DOI: 10.1002/app.22253

    18. Development of a novel microorganism immobilization method using anionic polyurethane (pages 738–743)

      Yun-Huin Lin, Sz-Chwun John Hwang, Wen-Chang Shih and Kuo-Cheng Chen

      Article first published online: 11 NOV 2005 | DOI: 10.1002/app.22542

    19. Surface modification of polyimide films by argon plasma for copper metallization on microelectronic flex substrates (pages 744–755)

      Yung-Sen Lin, Huang-Ming Liu and Hsuan-Ta Chen

      Article first published online: 11 NOV 2005 | DOI: 10.1002/app.22545

    20. Structural and mechanical characterization of poly(ether ether ketone) (PEEK) and sulfonated PEEK films: Effects of thermal history, sulfonation, and preparation conditions (pages 756–774)

      A. Reyna-Valencia, S. Kaliaguine and M. Bousmina

      Article first published online: 11 NOV 2005 | DOI: 10.1002/app.22551

    21. Study on the grafting of PET onto the glass fiber surface during in situ solid-state polycondensation (pages 775–781)

      Weixia Yan, KeQing Han, Hongmei Zhou and MuHuo Yu

      Article first published online: 11 NOV 2005 | DOI: 10.1002/app.22552

    22. Fabrication and characterization of biodegradable poly(propylene carbonate)/wood flour composites (pages 782–787)

      X. C. Ge, Q. Zhu and Y. Z. Meng

      Article first published online: 11 NOV 2005 | DOI: 10.1002/app.22557

    23. Characterization of PVC cable insulation materials and products obtained after removal of additives (pages 788–795)

      M. Beneš, V. Plaček, G. Matuschek, A. Kettrup, K. Györyová and V. Balek

      Article first published online: 11 NOV 2005 | DOI: 10.1002/app.22559

    24. Effect of water-soluble monomers on emulsifier-minor emulsion polymerization of butylacrylate–methacrylic acid–styrene and properties of the latices (pages 796–801)

      Linsheng Tang, Jingwei Yang, Yanbai Yin and Mei Zhang

      Article first published online: 11 NOV 2005 | DOI: 10.1002/app.22560

    25. Superstructure and mechanical properties of nylon 66 microfiber prepared by carbon dioxide laser-thinning method (pages 802–807)

      Akihiro Suzuki and Toshinori Hasegawa

      Article first published online: 11 NOV 2005 | DOI: 10.1002/app.22561

    26. Thermooxidative degradation of isotactic polypropylene prepared on metallocene catalyst and its sorption capacity (pages 808–811)

      T. V. Mohakhova, P. M. Nedorezova and Yu. A. Shlyapnikov

      Article first published online: 11 NOV 2005 | DOI: 10.1002/app.22584

    27. Synthesis and characterization of poly(N-methyl aniline) doped with sulphonic acids: Their application as humidity sensors (pages 812–820)

      Milind V. Kulkarni, Annamraju Kasi Viswanath and P. K. Khanna

      Article first published online: 11 NOV 2005 | DOI: 10.1002/app.22585

    28. Fluorinated acrylic polymers: Surface properties and XPS investigations (pages 821–827)

      Salima Saïdi, Frédéric Guittard, Claude Guimon and Serge Géribaldi

      Article first published online: 11 NOV 2005 | DOI: 10.1002/app.22586

    29. Synthesis of telechelic C60 end-capped polymers under microwave irradiation (pages 828–834)

      Huixia Wu, Feng Li, Yanghui Lin, Ming Yang, Wei Chen and Ruifang Cai

      Article first published online: 11 NOV 2005 | DOI: 10.1002/app.22587

    30. Micro-structure and characteristics of highly oriented polyoxymethylene obtained by press and biaxial drawing (pages 835–844)

      Kenji Takasa, Norikazu Miyashita and Kunihiko Takeda

      Article first published online: 11 NOV 2005 | DOI: 10.1002/app.22693

    31. Carbon-13 NMR, GPC, and DSC study on a propylene-1-butene copolymer fractionated by temperature rising elution fractionation (pages 845–851)

      Yudong Zhang

      Article first published online: 11 NOV 2005 | DOI: 10.1002/app.22589

    32. Releasing polyacrylonitrile from poor biodegradability by insertion of a highly biodegradable chemical structure into the main chain (pages 852–857)

      Nariyoshi Kawabata, Kenji Ohashi and Takeshi Nishiyama

      Article first published online: 11 NOV 2005 | DOI: 10.1002/app.22591

    33. Preparation and curing kinetics of bisphenol A type novolac epoxy resins (pages 858–868)

      Yanfang Liu, Chen Zhang, Zhongjie Du and Hangquan Li

      Article first published online: 11 NOV 2005 | DOI: 10.1002/app.22735

    34. Preparation and properties of polyimide nanocomposites via a soluble polyisoimide precursor (pages 869–874)

      Seung Bae Oh, Young Jun Kim and Ji Heung Kim

      Article first published online: 11 NOV 2005 | DOI: 10.1002/app.22753

    35. Morphology and mechanical properties of blends of thermoplastic polyurethane and polyolefins (pages 875–883)

      Yali Di, Maoqing Kang, Yuhua Zhao, Shirun Yan and Xinkui Wang

      Article first published online: 11 NOV 2005 | DOI: 10.1002/app.22809

    36. A novel polyurethane sealant based on hydroxy-terminated polybutadiene (pages 884–890)

      M. Patri, S. K. Rath and U. G. Suryavansi

      Article first published online: 11 NOV 2005 | DOI: 10.1002/app.22815

    37. Preparation and properties of a siloxane-containing 2-vinylpyridine–styrene–butadiene copolymer with water glass (pages 891–899)

      Shin-Ichi Inoue, Satoshi Nakakita, Ming Zhang, Yoji Imoto, Toshiaki Sakaki, Kiyoshige Muraoka, Tetsuo Mizoguti and Hiroshi Okamoto

      Article first published online: 11 NOV 2005 | DOI: 10.1002/app.22833

    38. Surface resistivity and rheological behaviors of carboxylated Multiwall carbon nanotube-filled PET composite film (pages 900–904)

      Dae Ho Shin, Kwan Han Yoon, Oh Hyeong Kwon, Byung Ghyl Min and Chang Ik Hwang

      Article first published online: 18 NOV 2005 | DOI: 10.1002/app.21982

    39. Morphology and thermal stability of BR/clay composites prepared by a new method (pages 905–913)

      Shaohui Wang, Yong Zhang, Zonglin Peng and Yinxi Zhang

      Article first published online: 18 NOV 2005 | DOI: 10.1002/app.22153

    40. Structure and properties of organoclay/EPDM nanocomposites: Influence of ethylene contents (pages 914–919)

      Yong Ma, You-Ping Wu, Yi-Qing Wang and Li-Qun Zhang

      Article first published online: 18 NOV 2005 | DOI: 10.1002/app.22247

    41. Methylmethacrylate polymerization photoinitiated by 1-(bromoacetyl)pyrene (pages 920–926)

      Swati Daswal and Anuradha Mishra

      Article first published online: 18 NOV 2005 | DOI: 10.1002/app.22269

    42. Polybenzoxazine containing polysilsesquioxane: Preparation and thermal properties (pages 927–936)

      Yonghong Liu, Weian Zhang, Yan Chen and Sixun Zheng

      Article first published online: 18 NOV 2005 | DOI: 10.1002/app.22270

    43. Evaluating the thermal stability of high performance fibers by TGA (pages 937–944)

      Xiaoyan Liu and Weidong Yu

      Article first published online: 18 NOV 2005 | DOI: 10.1002/app.22305

    44. Preparation of novel MgCl2-adduct supported spherical Ziegler–Natta catalyst for α-olefin polymerization (pages 945–948)

      Li Wang, Hao-Jie Yu, Zhen-Li Ma, Zhao-Yang Ye, Shan Jiang, Lian-Fang Feng and Xue-Ping Gu

      Article first published online: 18 NOV 2005 | DOI: 10.1002/app.22332

    45. Characterization of three-dimensional braided polyethylene fiber–PMMA composites and influence of fiber surface treatment (pages 949–956)

      Y. Z. Wan, H. L. Luo, Y. L. Wang, S. Raman, Y. Huang, T. L. Zhang and H. Liu

      Article first published online: 18 NOV 2005 | DOI: 10.1002/app.22374

    46. Reinforcing effect of silica on the properties of styrene butadiene rubber–reclaim rubber blend system (pages 957–968)

      Debapriya De, Amit Das, Debasish De, Prabir Kumar Panda, Brojendranath Dey and Bidhan Chandra Roy

      Article first published online: 18 NOV 2005 | DOI: 10.1002/app.22379

    47. Curie temperature of a ferromagnetic polymer chain model (pages 969–973)

      Jian-Hua Huang, Meng-Bo Luo and Chang-Ji Qian

      Article first published online: 18 NOV 2005 | DOI: 10.1002/app.22380

    48. Optimization of PE/Binder/PA extrusion blow-molded films. I. Heat sealing ability improvement using PE/EVA blends (pages 974–985)

      C. Poisson, V. Hervais, M. F. Lacrampe and P. Krawczak

      Article first published online: 18 NOV 2005 | DOI: 10.1002/app.22405

    49. Metallocene-catalyzed olefin polymerization using magnesium chloride-supported borate activators (pages 986–993)

      M. Smit, J. R. Severn, X. Zheng, J. Loos and J. C. Chadwick

      Article first published online: 18 NOV 2005 | DOI: 10.1002/app.22449

    50. Mechanical relaxations of poly(β,L-aspartate)s (pages 994–1003)

      Xavier Ramis, Montserrat García-Alvarez and Sebastián Muñoz-Guerra

      Article first published online: 18 NOV 2005 | DOI: 10.1002/app.22508

    51. Nano-addition of raw bentonite enhances polypropylene (PP) properties (pages 1004–1009)

      A. K. Kulshreshtha, A. K. Maiti, M. S. Choudhary and K. V. Rao

      Article first published online: 18 NOV 2005 | DOI: 10.1002/app.22590

    52. Addition-curable propargyl-containing novolac-type phenolic resin: Its synthesis, characterization, cure, and thermal properties (pages 1010–1017)

      Mingcun Wang, Liuhe Wei and Tong Zhao

      Article first published online: 18 NOV 2005 | DOI: 10.1002/app.22592

    53. Polymer nanofibers prepared by template melt extrusion (pages 1018–1023)

      Huayi Li, Yucai Ke and Youliang Hu

      Article first published online: 18 NOV 2005 | DOI: 10.1002/app.22597

    54. The effects of excimer laser irradiation at 248 nm on the surface mass loss and thermal properties of PS, ABS, PA6, and PC polymers (pages 1024–1037)

      Erol Sancaktar and Hui Lu

      Article first published online: 18 NOV 2005 | DOI: 10.1002/app.22598

    55. Polycondensation reaction of N,N′-(4,4′-oxydiphthaloyl)-bis-L-methionine diacid chloride with aromatic diamines: Synthesis and properties (pages 1038–1044)

      Shadpour Mallakpour and Elaheh Kowsari

      Article first published online: 18 NOV 2005 | DOI: 10.1002/app.22616

    56. Chain-linked lactic acid polymers by benzene diisocyanate (pages 1045–1049)

      Jie Ren, Qin-Feng Wang, Shu-Ying Gu, Nai-Wen Zhang and Tian-Bin Ren

      Article first published online: 18 NOV 2005 | DOI: 10.1002/app.22617

    57. Atom transfer radical polymerization of acrylonitrile (pages 1050–1054)

      Chen Hou, Liang Ying and Chengguo Wang

      Article first published online: 18 NOV 2005 | DOI: 10.1002/app.22618

    58. Effect of fiber surface treatment on the properties of biocomposites from nonwoven industrial hemp fiber mats and unsaturated polyester resin (pages 1055–1068)

      Geeta Mehta, Lawrence T. Drzal, Amar K. Mohanty and Manjusri Misra

      Article first published online: 18 NOV 2005 | DOI: 10.1002/app.22620

    59. Cure characteristics, morphology, mechanical properties, and aging characteristics of silicone rubber/ethylene vinyl acetate blends (pages 1069–1082)

      B. Ganesh and G. Unnikrishnan

      Article first published online: 18 NOV 2005 | DOI: 10.1002/app.22621

    60. New melamine–formaldehyde–ketone polymers. III. Coatings from melamine and reactive solvents based on cyclohexanone (pages 1083–1092)

      Dorota Głowacz-Czerwonka and Mieczysław Kucharski

      Article first published online: 18 NOV 2005 | DOI: 10.1002/app.22622

    61. The research of RATRP of styrene in the microemulsion (pages 1093–1099)

      Haike Feng and Yi Dan

      Article first published online: 18 NOV 2005 | DOI: 10.1002/app.22384

    62. Temperature and pH-response swelling behavior of poly(2-ethyl-2-oxazoline)/chitosan interpenetrating polymer network hydrogels (pages 1100–1103)

      Seon Jeong Kim, Ki Jung Lee, In Young Kim, Dong Ik Shin and Sun I. Kim

      Article first published online: 18 NOV 2005 | DOI: 10.1002/app.22091

    63. Thermal diffusivity of polyolefins by temperature wave analysis (pages 1104–1110)

      H. J. Chang, J. Morikawa and T. Hashimoto

      Article first published online: 18 NOV 2005 | DOI: 10.1002/app.22102

    64. Preparation of soap-free cationic emulsion using polymerizable surfactant (pages 1111–1116)

      Liqiang Jin, Zonglin Liu, Qinghua Xu and Yanchun Li

      Article first published online: 18 NOV 2005 | DOI: 10.1002/app.22168

    65. Rheological and thermogravimetric studies of the crosslinking process of functionalized acrylic latexes (pages 1117–1123)

      Sylvie Fourdrin, Maryline Rochery, Maryline Lewandowski, Manuela Ferreira and Serge Bourbigot

      Article first published online: 18 NOV 2005 | DOI: 10.1002/app.22281

    66. Time dependences of conduction and self-heating in acetylene carbon black-filled high-density polyethylene composites (pages 1124–1131)

      Yihu Song and Qiang Zheng

      Article first published online: 18 NOV 2005 | DOI: 10.1002/app.22294

    67. Effect of vulcanization technique on the physical properties of silica-filled EPDM rubber (pages 1132–1139)

      Amit Das, Debapriya De, Nityananda Naskar and Subhas Chandra Debnath

      Article first published online: 18 NOV 2005 | DOI: 10.1002/app.22308

    68. Effects of N-trimethyl chitosan chloride as an absorption enhancer on properties of insulin liquid suppository in vitro and in vivo (pages 1140–1146)

      Wen He, Yumin Du, Wenbing Dai, Yan Wu and Mian Zhang

      Article first published online: 18 NOV 2005 | DOI: 10.1002/app.22317

    69. Synthesis and self-assembly of hyperbranched polyethers peripherally modified with adenosine 5′-monophosphate (pages 1147–1152)

      Guohua Jiang, Li Wang, Xiaochen Dong, Chang Chen and Tao Chen

      Article first published online: 18 NOV 2005 | DOI: 10.1002/app.22321

    70. Bioactive composites with designed interphases based on hyperbranched macromers (pages 1153–1166)

      Rodrigo L. Oréfice, Arthur E. Clark and Anthony. B. Brennan

      Article first published online: 18 NOV 2005 | DOI: 10.1002/app.22326

    71. Synthesis, characterization, reactivity ratios by nuclear magnetic resonance spectroscopy, and application of (2,5-Dichlorophenyl acrylate-co-glycidyl methacrylate) polymers as adhesives for the leather industry (pages 1167–1174)

      P. G. Vijayaraghavan and B. S. R. Reddy

      Article first published online: 18 NOV 2005 | DOI: 10.1002/app.22327

    72. The synthesis and application of Pb-doped GLYMO/chelated-zirconium complex coating materials for UV-light absorption (pages 1175–1179)

      Meltem Asiltürk, Funda Sayılkan, Hikmet Sayılkan and Galip İçduygu

      Article first published online: 18 NOV 2005 | DOI: 10.1002/app.22583

    73. Chelating polymer granules prepared by radiation-induced homopolymerization. II. Characterizations (pages 1180–1187)

      Sayed M. Badawy, Hesham H. Sokker and Ahmed M. Dessouki

      Article first published online: 18 NOV 2005 | DOI: 10.1002/app.22593

    74. Structure and properties of polycarbosilane synthesized from polydimethylsilane under high pressure (pages 1188–1194)

      Xiangzhen Cheng, Zhengfang Xie, Yongcai Song, Jiayu Xiao and Yingde Wang

      Article first published online: 18 NOV 2005 | DOI: 10.1002/app.22594

    75. The effects of acrylate monomers and polystyrene addition on the morphology of DOP-plasticized styrene–acrylate polymer particles prepared by SPG emulsification and suspension polymerization (pages 1195–1206)

      Roongkan Nuisin, Shinzo Omi and Suda Kiatkamjornwong

      Article first published online: 18 NOV 2005 | DOI: 10.1002/app.22595

    76. Microstructure and fracture behavior of polypropylene/barium sulfate composites (pages 1207–1213)

      Ke Wang, Jingshen Wu and Hanmin Zeng

      Article first published online: 18 NOV 2005 | DOI: 10.1002/app.22596

    77. Effect of solution properties on nanofibrous structure of electrospun poly(lactic-co-glycolic acid) (pages 1214–1221)

      Young You, Seung Jin Lee, Byung-Moo Min and Won Ho Park

      Article first published online: 18 NOV 2005 | DOI: 10.1002/app.22602

    78. Novel polyurethane insulating coatings based on polyhydroxyl compounds, derived from glycolysed PET and castor oil (pages 1222–1233)

      Hamid Yeganeh and Mohammad Amin Shamekhi

      Article first published online: 18 NOV 2005 | DOI: 10.1002/app.22605

    79. Phase reversal during water dispersion of polyurethane anionomer (pages 1234–1239)

      Xiaorong Dang, Qiaolong Yuan, Jiezhu Fang and Dening Wang

      Article first published online: 18 NOV 2005 | DOI: 10.1002/app.22606

    80. High performance wood composites from highly filled polybenzoxazine (pages 1240–1253)

      Sarawut Rimdusit, Wiwut Tanthapanichakoon and Chanchira Jubsilp

      Article first published online: 18 NOV 2005 | DOI: 10.1002/app.22607

    81. Main-chain chiral smectic liquid-crystalline ionomers containing sulfonic acid groups (pages 1254–1263)

      Mei Tian, Bao-Yan Zhang, Fan-Bao Meng and Bao-Ling Zang

      Article first published online: 18 NOV 2005 | DOI: 10.1002/app.22615

    82. Synthesis of a new chitosan immobilized with β-cyclodextrins and its adsorption properties for bilirubin (pages 1264–1268)

      Ying Yi, Yuting Wang and Weian Zhang

      Article first published online: 18 NOV 2005 | DOI: 10.1002/app.22652

    83. Blends of thermotropic liquid crystalline polymer and O-cresol formaldehyde epoxy resin. II. Curing kinetics (pages 1269–1276)

      Song Ting Tan, Zeng Fang Huang, Min Na Liu and Xia Yu Wang

      Article first published online: 18 NOV 2005 | DOI: 10.1002/app.22653

    84. Polyaniline–nylon 6 composite nanowires prepared by emulsion polymerization and electrospinning process (pages 1277–1286)

      Kyung Hwa Hong and Tae Jin Kang

      Article first published online: 18 NOV 2005 | DOI: 10.1002/app.22654

    85. In-situ curing analysis of photoreplicated objective lenses using Raman and IR spectroscopy (pages 1287–1295)

      Arjan Mank, Emile Verstegen and Hans Kloosterboer

      Article first published online: 18 NOV 2005 | DOI: 10.1002/app.22668

    86. Determination of the solubility of a monomer in water by multiple headspace extraction gas chromatography (pages 1296–1301)

      X.-S. Chai, Q. X. Hou and F. J. Schork

      Article first published online: 18 NOV 2005 | DOI: 10.1002/app.20984

SEARCH

SEARCH BY CITATION