Journal of Applied Polymer Science

Cover image for Journal of Applied Polymer Science

15 February 2006

Volume 99, Issue 4

Pages 1303–1991

    1. Synthesis and properties of poly ether nitrile sulfone copolymers with pendant methyl groups (pages 1303–1309)

      Akanksha Saxena, R. Sadhana, V. Lakshmana Rao, P. V. Ravindran and K. N. Ninan

      Version of Record online: 28 NOV 2005 | DOI: 10.1002/app.21780

    2. Flammability and thermal properties of high density polyethylene/paraffin hybrid as a form-stable phase change material (pages 1320–1327)

      Yibing Cai, Yuan Hu, Lei Song, Yong Tang, Rui Yang, Yinping Zhang, Zuyao Chen and WeiCheng Fan

      Version of Record online: 28 NOV 2005 | DOI: 10.1002/app.22065

    3. Characterization of lignocellulosic–poly(lactic acid) reinforced composites (pages 1346–1349)

      Q. X. Hou, X. S. Chai, R. Yang, T. Elder and A. J. Ragauskas

      Version of Record online: 28 NOV 2005 | DOI: 10.1002/app.22236

    4. Novel stabilization system for polypropylene via the Ziegler–Natta catalyzed polymerization in the presence of aluminum aryloxide (pages 1350–1358)

      N. Kawamoto, T. Horikoshi, K. Nomura, H. Yokota, Y. Negishi, E. Tobita and M. Terano

      Version of Record online: 28 NOV 2005 | DOI: 10.1002/app.22309

    5. Flame retardant epoxy resins based on diglycidyl ether of isobutyl bis(hydroxypropyl)phosphine oxide (pages 1367–1373)

      Gemma Ribera, L. Adolfo Mercado, Marina Galià and Virginia Cádiz

      Version of Record online: 28 NOV 2005 | DOI: 10.1002/app.22325

    6. Effect of diether as internal donor on MgCl2-supported Ziegler–Natta catalyst for propylene polymerization (pages 1399–1404)

      Nannan Cui, Yucai Ke, Huayi Li, Zhicheng Zhang, Cunyue Guo, Zhanxia Lv and Youliang Hu

      Version of Record online: 28 NOV 2005 | DOI: 10.1002/app.22624

    7. Electrospun nanofibers of block copolymer of trimethylene carbonate and ϵ-caprolactone (pages 1462–1470)

      Yong-Tang Jia, Hak-Yong Kim, Jian Gong and Duck-Rae Lee

      Version of Record online: 28 NOV 2005 | DOI: 10.1002/app.22633

    8. Rheological characterization of PP/jute composite melts (pages 1476–1484)

      Smita Mohanty, Sushil K. Verma and Sanjay K. Nayak

      Version of Record online: 28 NOV 2005 | DOI: 10.1002/app.22661

    9. Tensile and elastic behavior of tencel continuous filaments (pages 1496–1503)

      Iram Abdullah, Richard S. Blackburn, Stephen J. Russell and Jim Taylor

      Version of Record online: 30 NOV 2005 | DOI: 10.1002/app.22145

    10. Studies on poly(8-hydroxy-4-azoquinolinephenylmethacrylate) and its metal complexes (pages 1516–1522)

      S. Vijayalakshmi, S. Subramanian, S. Rajagopan and T. Kaliyappan

      Version of Record online: 30 NOV 2005 | DOI: 10.1002/app.22231

    11. The linear viscoelastic properties of copolypropylene–clay nanocomposites (pages 1523–1529)

      Weixia Zhong, Xiuying Qiao, Kang Sun, Guoding Zhang and Xiaodong Chen

      Version of Record online: 30 NOV 2005 | DOI: 10.1002/app.22244

    12. New solid polymer electrolytes based on PEO/PAN hybrids (pages 1530–1540)

      Wu Chun-Guey, Wu Chiung-Hui, Lu Ming-I and Chuang Huey-Jan

      Version of Record online: 30 NOV 2005 | DOI: 10.1002/app.22250

    13. Thermal and electrical conductivity of carbon–filled liquid crystal polymer composites (pages 1552–1558)

      Julia A. King, Michael G. Miller, Rodwick L. Barton, Jason M. Keith, Rebecca A. Hauser, Karl R. Peterson and Lawrence L. Sutter

      Version of Record online: 6 DEC 2005 | DOI: 10.1002/app.22452

    14. Effect of organoclay on the thermal stability, mechanical strength, and surface wettability of injection-molded ABS–clay nanocomposite materials prepared by melt intercalation (pages 1576–1582)

      Jui-Ming Yeh, Chi-Lun Chen, Chao-Chen Huang, Fang-Chia Chang, Shia-Chung Chen, Pao-Lin Su, Chih-Che Kuo, Jui-Ting Hsu, Boyang Chen and Yuan-Hsiang Yu

      Version of Record online: 6 DEC 2005 | DOI: 10.1002/app.22329

    15. Fire-retardant plastic material from oyster-shell powder and recycled polyethylene (pages 1583–1589)

      Mi Hwa Chong, Byoung Chul Chun, Yong-Chan Chung and Bong Gyoo Cho

      Version of Record online: 6 DEC 2005 | DOI: 10.1002/app.22484

    16. Gas transport and thermal characterization of mono- and di-polyethylene films used for food packaging (pages 1590–1599)

      Saša Mrkić, Kata Galić, Marica Ivanković, Sandra Hamin and Nada Ciković

      Version of Record online: 6 DEC 2005 | DOI: 10.1002/app.22513

    17. Rheological, thermal, and curing properties of natural rubber-g-poly(methyl methacrylate) (pages 1600–1614)

      Charoen Nakason, W. Pechurai, K. Sahakaro and A. Kaesaman

      Version of Record online: 6 DEC 2005 | DOI: 10.1002/app.22518

    18. Synthesis of chelate resins derived from furfural and their adsorption properties for metal ions (pages 1620–1626)

      Lin-Cheng Zhou, Yan-Feng Li, Shu-Jiang Zhang, Xi-Jun Chang, Ying-Feng Hou and Hai-Xia Yang

      Version of Record online: 6 DEC 2005 | DOI: 10.1002/app.22528

    19. Metallization of UV-cured acrylate resins by reduction of polymer-incorporated cobalt ion (pages 1627–1632)

      Masamichi Kuribayashi, Yuko Narita and Mitsuhiro Shibata

      Version of Record online: 6 DEC 2005 | DOI: 10.1002/app.22529

    20. Characterization of poly(N-(hydroxymethyl)methacrylamide-ATU) hydrogels synthesized by γ radiation (pages 1657–1664)

      Nurettin Şahiner, Ömür Çelikbıçak, Savaş Malcı, Ömer Kantoǧlu and Bekir Salih

      Version of Record online: 6 DEC 2005 | DOI: 10.1002/app.22462

    21. Chitosan/clay nanocomposite film preparation and characterization (pages 1684–1691)

      Yixiang Xu, Xi Ren and Milford A. Hanna

      Version of Record online: 6 DEC 2005 | DOI: 10.1002/app.22664

    22. Water sorption and diffusion behaviors in composite films of poly(ether imide) and bismaleimide (pages 1692–1697)

      Jongchul Seo, Choonkeun Lee, Wonbong Jang, Saimani Sundar and Haksoo Han

      Version of Record online: 6 DEC 2005 | DOI: 10.1002/app.22665

    23. Characterization of evaporated and sputtered thin Au layers on poly(ethylene terephtalate) (pages 1698–1704)

      V. Švorčík, P. Slepička, J. Švorčíková, M. Špírková, J. Zehentner and V. Hnatowicz

      Version of Record online: 6 DEC 2005 | DOI: 10.1002/app.22666

    24. Effect of molecular structure on performance of electroactive ionic acrylic copolymer–platinum composites (pages 1732–1739)

      Han Mo Jeong, Sung Min Woo, Sukmin Lee, Gook-Chan Cha and Mu Seong Mun

      Version of Record online: 6 DEC 2005 | DOI: 10.1002/app.22701

    25. Preparation and characterization of microcellular thin polycarbonate sheets (pages 1760–1766)

      Banglong Xiang, Rong Guan, Quan Fang, Zhaoxin Xiao and Yajing Jiang

      Version of Record online: 6 DEC 2005 | DOI: 10.1002/app.22705

    26. Essential work of fracture evaluation of fracture behavior of glass bead filled linear low-density polyethylene (pages 1781–1787)

      Wei Yang, Bang-Hu Xie, Wei Shi, Zhong-Ming Li, Zheng-Ying Liu, Jun Chen and Ming-Bo Yang

      Version of Record online: 7 DEC 2005 | DOI: 10.1002/app.22708

    27. Flour rice husk as filler in block copolymer polypropylene: Effect of different coupling agents (pages 1823–1831)

      Ferran Martí-Ferrer, Francisco Vilaplana, Amparo Ribes-Greus, Adolfo Benedito-Borrás and Concha Sanz-Box

      Version of Record online: 7 DEC 2005 | DOI: 10.1002/app.22717

    28. Analysis by mass spectrometry of the hydrolysis/condensation reaction of a trialkoxysilane in various dental monomer solutions (pages 1842–1847)

      Mahnaz Farahani, William E. Wallace, Joseph M. Antonucci and Charles M. Guttman

      Version of Record online: 7 DEC 2005 | DOI: 10.1002/app.22190

    29. Effect of ethanol on chemically synthesized polyaniline nanothread (pages 1848–1853)

      Jinqing Kan, Shuling Zhang and Guolin Jing

      Version of Record online: 7 DEC 2005 | DOI: 10.1002/app.22345

    30. Comparative effects of pyrolyzed oil shale and pyrolyzed burned oil shale used as fillers in poly(ethylene-co-vinyl alcohol) (pages 1859–1864)

      Ronilson Vasconcelos Barbosa, Ricardo Baumhardt-Neto, Raquel Santos Mauler, Éder Cláudio Lima and Cláudia Gazzana Schneider

      Version of Record online: 7 DEC 2005 | DOI: 10.1002/app.22543

    31. Structure and properties of polyamides-epoxidized elastomers blends (pages 1872–1879)

      Ryszard Steller, Ewa Micewicz, Wanda Meissner, Jacek Piglowski and Józef Haponiuk

      Version of Record online: 7 DEC 2005 | DOI: 10.1002/app.22599

    32. Copolymerization of acrylonitrile with methyl vinyl ketone (pages 1940–1944)

      Chen Hou, Junshen Liu, Liang Ying and Chengguo Wang

      Version of Record online: 7 DEC 2005 | DOI: 10.1002/app.22682

    33. A convenient method to determine the Rayleigh ratio with uniform polystyrene oligomers (pages 1953–1959)

      Masanao Itakura, Kayori Shimada, Shigetomo Matsuyama, Takeshi Saito and Shinichi Kinugasa

      Version of Record online: 7 DEC 2005 | DOI: 10.1002/app.22695

    34. Adhesion measurement of interfaces between gelatin and poly(ethylene terephthalate) using microscratch technique (pages 1960–1974)

      Chi-An Dai, Chih-Chien Liao, Tai-An Tsui, Hao-Ching Chien and Ming-Wei Liu

      Version of Record online: 7 DEC 2005 | DOI: 10.1002/app.22697

SEARCH

SEARCH BY CITATION