Interaction of oil sands tailings particles with polymers and microbial cells: First steps toward reclamation to soil

Authors

  • Gerrit Voordouw

    Corresponding author
    1. Department of Biological Sciences, Petroleum Microbiology Research Group, University of Calgary, Calgary, Alberta, T2N 1N4, Canada
    • Department of Biological Sciences, Petroleum Microbiology Research Group, University of Calgary, Calgary, Alberta, T2N 1N4, Canada
    Search for more papers by this author

  • This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com

Abstract

Production of bitumen by surface mining of Alberta's oil sands has given rise to tailings ponds, containing large volumes of finely dispersed clays (108 m3), which settle only slowly. The mature fine tailings (MFT) in these ponds are operationally defined as consisting of particles smaller than 44 μm with a solids content in excess of 30% (w/w). Increasing the rate of densification of MFT is a rate-limiting step in tailings pond reclamation. Accelerated densification has been achieved through mixing of MFT with sand in the presence of calcium sulfate as a binding agent to generate consolidated tailings. Addition of negatively charged polymer, together with either calcium or magnesium ions, is similarly effective. Although toxic to higher aquatic life, tailings ponds harbour a wide variety of mainly anaerobic microbes. These convert residual hydrocarbon, causing methane emissions of up to 104 m3 day−1. Interestingly, anaerobic microbial activity also accelerates tailings pond densification. Hence, many technologies designed to accelerate densification move tailings, at least conceptually, towards soil in which sand and clay particles are linked by large amounts of humic and fulvic acid polymers supporting large numbers of microbes in a mechanically stable structure. © 2012 Wiley Periodicals, Inc. Biopolymers 99: 257–262, 2013.

Ancillary