Automated, spatio-temporally controlled cell microprinting with polymeric aqueous biphasic system
Version of Record online: 11 SEP 2013
© 2013 Wiley Periodicals, Inc.
Biotechnology and Bioengineering
Volume 111, Issue 2, pages 404–412, February 2014
How to Cite
Petrak, D., Atefi, E., Yin, L., Chilian, W. and Tavana, H. (2014), Automated, spatio-temporally controlled cell microprinting with polymeric aqueous biphasic system. Biotechnol. Bioeng., 111: 404–412. doi: 10.1002/bit.25100
- Issue online: 19 DEC 2013
- Version of Record online: 11 SEP 2013
- Accepted manuscript online: 23 AUG 2013 07:26AM EST
- Manuscript Accepted: 16 AUG 2013
- Manuscript Revised: 15 AUG 2013
- Manuscript Received: 10 JUN 2013
Additional supporting information can be found in the online version of this article at the publisher's web-site.
|bit25100-sm-0001-SupFig-S1.tif||1521K||Figure S1. Changes in the width of printed patterns due to continuous decrease in the volume of dispensing DEX phase in the printing tip, at different tip speeds. All measurements were done over a length of 28 mm of printed patterns. Patterns printed with 300 μm tips show significant decrease in width at low speeds. This however diminishes by increase in the printing tip speed. With 200 μm tips, patterns show only ∼25 μm change in width regardless of printing tip speed.|
Please note: Wiley Blackwell is not responsible for the content or functionality of any supporting information supplied by the authors. Any queries (other than missing content) should be directed to the corresponding author for the article.