Biocatalysts and Bioreactor Design
Effect of initial bacteria concentration on hydrogen gas production from cheese whey powder solution by thermophilic dark fermentation
Article first published online: 18 JUN 2012
DOI: 10.1002/btpr.1558
Copyright © 2012 American Institute of Chemical Engineers (AIChE)
Additional Information
How to Cite
Kargi, F., Eren, N. S. and Ozmihci, S. (2012), Effect of initial bacteria concentration on hydrogen gas production from cheese whey powder solution by thermophilic dark fermentation. Biotechnol Progress, 28: 931–936. doi: 10.1002/btpr.1558
Publication History
- Issue published online: 7 AUG 2012
- Article first published online: 18 JUN 2012
- Accepted manuscript online: 11 MAY 2012 10:09AM EST
- Manuscript Revised: 25 APR 2012
- Manuscript Received: 28 FEB 2012
Funded by
- Scientific and Technological Research Council of Turkey. Grant Number: BIDEP 2209
- Dokuz Eylul University Research Funds. Grant Number: 2009.KB.FEN 048
- Abstract
- Article
- References
- Cited By
Keywords:
- biohydrogen;
- biomass (bacteria) concentration;
- cheese whey powder;
- thermophilic dark fermentation
Abstract
Dark fermentative hydrogen gas production from cheese whey powder solution was realized at 55°C. Experiments were performed at different initial biomass concentrations varying between 0.48 and 2.86 g L−1 with a constant initial substrate concentration of 26 ± 2 g total sugar (TS) per liter. The highest cumulative hydrogen evolution (633 mL, 30°C), hydrogen yield (1.56 mol H2 mol−1 glucose), and H2 formation rate (3.45 mL h−1) were obtained with 1.92 g L−1 biomass concentration. The specific H2 production rate decreased with increasing biomasss concentration from the highest value (47.7 mL g−1 h−1) at 0.48 g L−1 biomass concentration. Total volatile fatty acid concentration varied beetween 10 and 14 g L−1 with the highest level of 14.2 g L−1 at biomass concentration of 0.48 g L−1 and initial TS content of 28.4 g L−1. The experimental data were correlated with the Gompertz equation and the constants were determined. The most suitable initial biomass to substrate ratio yielding the highest H2 yield and formation rate was 0.082 g biomass per gram of TS. © 2012 American Institute of Chemical Engineers Biotechnol. Prog., 28: 931–936, 2012

1520-6033/asset/BTPR_left.gif?v=1&s=a5be2ff5a0fe6ccdaad74a6d128c142e5f71a8da)
1520-6033/asset/BTPR_right.gif?v=1&s=992d113a3e61fc9d3571812359165df86cf830e4)
