Chemical Engineering & Technology

Cover image for Chemical Engineering & Technology

1988

Volume 11, Issue 1

Pages fmi–fmi, 1–447

  1. Masthead

    1. Top of page
    2. Masthead
    3. Articles
    1. Masthead (page fmi)

      Article first published online: 2 FEB 2004 | DOI: 10.1002/ceat.270110101

  2. Articles

    1. Top of page
    2. Masthead
    3. Articles
    1. Interfacial areas and gas hold-ups at elevated pressures in a mechanically agitated gas-liquid reactor (pages 1–10)

      Ir. Martin Oyevaar, Ir. Ad Zijl and Prof. Dr. Ir. Roel Westerterp

      Article first published online: 2 FEB 2004 | DOI: 10.1002/ceat.270110102

    2. Axial pressure profile in circulating fluidized beds (pages 11–17)

      Dr.-Ing. Karl-Ernst Wirth

      Article first published online: 2 FEB 2004 | DOI: 10.1002/ceat.270110103

    3. Engineering aspects and applications of crossflow microfiltration (pages 17–25)

      Dr.-Ing. Siegfried Ripperger

      Article first published online: 2 FEB 2004 | DOI: 10.1002/ceat.270110104

    4. Mass transfer contributions of solid particles to gas permeation in viscous laminar tube flow (pages 25–31)

      Dr.-Ing. Brigitte Haase and Prof. Dr.-Ing. Klaus Bauckhage

      Article first published online: 2 FEB 2004 | DOI: 10.1002/ceat.270110105

    5. Effect of chlorine on the selectivity of a fischer-tropsch catalyst composed of iron/vanadium oxides (pages 32–39)

      Jochen Jacobs and Prof. Dr. Manfred Baerns

      Article first published online: 2 FEB 2004 | DOI: 10.1002/ceat.270110106

    6. The influence of stress and attrition on crystal size distribution (pages 40–49)

      Dr.-Ing. Joachim Pohlisch and Prof. Dr.-Ing Alfons Mersmann

      Article first published online: 2 FEB 2004 | DOI: 10.1002/ceat.270110107

    7. A robust pole-placement self-tuning controller for chemical process control: Theoretical studies and simulation (pages 57–62)

      Prof. Dr. Sohrab Rohani and Douglas W. Quail

      Article first published online: 2 FEB 2004 | DOI: 10.1002/ceat.270110109

    8. Derivation, selection, evaluation and use of asymptotes (pages 63–72)

      Prof. Dr. Stuart W. Churchill

      Article first published online: 2 FEB 2004 | DOI: 10.1002/ceat.270110110

    9. Experimental results from a plate-column wet scrubber with gas-atomized spray (pages 73–79)

      Engineer Xiaolun Fan, Dipl.-Ing. Tilman Schultz and Prof. Dr.-Ing. Edgar Muschelknautz

      Article first published online: 2 FEB 2004 | DOI: 10.1002/ceat.270110111

    10. Attrition and secondary nucleation in crystallizers (pages 80–88)

      Prof. Alfons Mersmann, Dipl.-Ing Reinhard Sangl, Dipl.-Ing Matthias Kind and Dr.-Ing Joachim Pohlisch

      Article first published online: 2 FEB 2004 | DOI: 10.1002/ceat.270110112

    11. The stability of crude oil residues and factors affecting their decomposition during mild thermal treatment (pages 89–94)

      Kenneth A. Pilcher BSc., Phd. and John M. Winterbottom BSc., PhD.

      Article first published online: 2 FEB 2004 | DOI: 10.1002/ceat.270110113

    12. Theoretical and experimental study of sedimentation in vertical flow tanks (pages 95–104)

      Dipl.-Ing. Eva-Maria Horn and Prof. Dr.-Ing. Udo Wiesmann

      Article first published online: 2 FEB 2004 | DOI: 10.1002/ceat.270110114

    13. Effect of combustion air preheating on NOx emissions from gas burners in high-temperature industrial applications (pages 104–112)

      Dipl.-Ing. Michael Flamme, Dr.-Ing. Christian Paul Beckervordersandforth and Prof. Dr.-Ing. Hans Kremer

      Article first published online: 2 FEB 2004 | DOI: 10.1002/ceat.270110115

    14. Kinetic analysis of the oxidation of isobutyraldehyde in liquid phase (pages 120–126)

      Prof. Dr. Gerhard Emig, Dr.-Ing. Thomas Haeberle, Dipl.-Ing. Werner Höss and Dipl.-Ing. Otto Watzenberger

      Article first published online: 2 FEB 2004 | DOI: 10.1002/ceat.270110117

    15. Heat transfer between particle beds and submerged surfaces (pages 126–138)

      Prof. Dr.-Ing. Otto Molerus and Dipl.-Phys. Horst Scheuring

      Article first published online: 2 FEB 2004 | DOI: 10.1002/ceat.270110118

    16. Measurement of temperature fields in mixing vessels using optical topography (pages 148–155)

      Dr.-InG. Wilfried Ostendorf and Prof. Dr.-Ing. Dieter Mewes

      Article first published online: 2 FEB 2004 | DOI: 10.1002/ceat.270110120

    17. Absorption of SO2 by aqueous NaOH solutions in the presence of a surfactant (pages 156–162)

      Dr. Gonzalo Vázquez, Dr. Gervasio Antorrena, Dr. Francisco Chenlo and Francisco Paleo

      Article first published online: 2 FEB 2004 | DOI: 10.1002/ceat.270110121

    18. A new fluid dynamic model for mixing of newtonian and power-law liquids in the transient regime (pages 162–170)

      Dipl.-Ing. Rolf Zeppenfeld and Prof. Dr.-Ing. Alfons B. Mersmann

      Article first published online: 2 FEB 2004 | DOI: 10.1002/ceat.270110122

    19. A model-based control system for a distillation column (pages 188–194)

      Dr.-Ing. Franz Ferdinand Rhiel and Dipl.-Ing. Franz Krahl

      Article first published online: 2 FEB 2004 | DOI: 10.1002/ceat.270110125

    20. Organosolv delignification of southern pine – an alternative pulping process (pages 195–199)

      K. Zargarian, R. Aravamuthan and G. C. April

      Article first published online: 2 FEB 2004 | DOI: 10.1002/ceat.270110126

    21. Consistent scale-up procedure for the power consumption in agitated non-newtonian fluids (pages 199–205)

      Prof. Dr. Gert Böhme and Dipl.-Ing. Matthias Stenger

      Article first published online: 2 FEB 2004 | DOI: 10.1002/ceat.270110127

    22. Bubble column research in Japan (pages 205–212)

      Prof. Dr. Fumitake Yoshida

      Article first published online: 2 FEB 2004 | DOI: 10.1002/ceat.270110128

    23. Application of modern packings in thermal separation processes (pages 213–227)

      Prof. Dr.-Ing. Reinhard Billet and Dr.-Ing. Jerzy Maćkowiak

      Article first published online: 2 FEB 2004 | DOI: 10.1002/ceat.270110129

    24. Thermal radiation of gas/solid mixtures (pages 237–243)

      Dr.-Ing. Thomas Elsner, Dr.-Ing. Dieter Köneke and Prof. Dr.-Ing. Paul-Michael Weinspach

      Article first published online: 2 FEB 2004 | DOI: 10.1002/ceat.270110131

    25. Effect of ethane addition on propane pyrolysis (pages 243–248)

      Dr. Emenike N. Wami

      Article first published online: 2 FEB 2004 | DOI: 10.1002/ceat.270110132

    26. Volumetric mass transfer coefficient in stirred reactors (pages 249–251)

      Dr. Václav Linek and Dr. Václav Vacek

      Article first published online: 2 FEB 2004 | DOI: 10.1002/ceat.270110133

    27. Scale-up of mechanically agitated extraction columns (pages 259–263)

      Dr.-Ing. habil. Theo Pilhofer

      Article first published online: 2 FEB 2004 | DOI: 10.1002/ceat.270110135

    28. Chemical engineering aspects of precipitation from solution (pages 264–276)

      Prof. Dr.-Ing. Alfons Mersmann and Dipl.-Ing. Matthias Kind

      Article first published online: 2 FEB 2004 | DOI: 10.1002/ceat.270110136

    29. The role of energy dissipation in contacting and mixing devices (pages 276–287)

      Prof. Jacques Villermaux

      Article first published online: 2 FEB 2004 | DOI: 10.1002/ceat.270110137

    30. Development of design charts for fixed-bed adsorption (pages 289–297)

      Dipl.-Ing. Wilhelm Otten and Proof. Dr.-Ing. Werner Kast

      Article first published online: 2 FEB 2004 | DOI: 10.1002/ceat.270110138

    31. The significance of fly ash in wet-dry scrubbing of SO2 (pages 298–305)

      Tom Petersen and Dr. Hans T. Karlsson

      Article first published online: 2 FEB 2004 | DOI: 10.1002/ceat.270110139

    32. Mass transfer behaviour of gas-liquid jet loop reactors (pages 306–311)

      Dr.-Ing. Hans-Joachim Warnecke, Dipl.-Chem. Matthias Geisendörfer and Prof. Dr.-Ing. Dietmar Christian Hempel

      Article first published online: 2 FEB 2004 | DOI: 10.1002/ceat.270110140

    33. Mass transfer in centrifugal extractors (pages 312–320)

      Dipl.-Ing. Franz Otillinger and Prof. Dr.-Ing. Eckhart Blass

      Article first published online: 2 FEB 2004 | DOI: 10.1002/ceat.270110141

    34. Subcooled boiling heat transfer to R 12 in an annular vertical channel (pages 320–327)

      Dipl.-Ing. Holger Bräuer and Prof. Dr.-Ing. Franz Mayinger

      Article first published online: 2 FEB 2004 | DOI: 10.1002/ceat.270110142

    35. Modelling of multiphase detonations with drop disintegration - description of thermal detonations (pages 327–334)

      Dr. Constantinos Carachalios, Prof. Dr.-Ing. Hermann Unger and D.P. Manfred Bürger

      Article first published online: 2 FEB 2004 | DOI: 10.1002/ceat.270110143

    36. Characteristics of solid suspensions in a bubble column without and with draft tube (pages 335–340)

      Dr.-Ing. Joachim Heck and Prof. Dr. Ulfert Onken

      Article first published online: 2 FEB 2004 | DOI: 10.1002/ceat.270110144

    37. Modelling of a pressure swing adsorption process for oxygen enrichment with carbon molecular sieve (pages 341–351)

      Dr.-Ing. Albert Seemann, Dr.-Ing. Ekkehard Richter and Prof. Dr. Harald Jüntgen

      Article first published online: 2 FEB 2004 | DOI: 10.1002/ceat.270110145

    38. Modelling of activated carbon desorption by a circulated inert gas (pages 352–358)

      Dr.-Ing. Andrzej Jedrzejak

      Article first published online: 2 FEB 2004 | DOI: 10.1002/ceat.270110146

    39. The importance of corrosion prevention for the safety of chemical plants (pages 359–365)

      Prof. Dr. Hubert Gräfen

      Article first published online: 2 FEB 2004 | DOI: 10.1002/ceat.270110147

    40. Decoking of fixed-bed catalytic reactors (pages 367–375)

      Prof. Dr. Ir. K. Roel Westerterp, Ir. H. Jan Fontein and Drs. Frits P. H. van Beckum

      Article first published online: 2 FEB 2004 | DOI: 10.1002/ceat.270110148

    41. Model discrimination and parameter estimation in the kinetic study of methanol synthesis (pages 375–383)

      Dr. Ir. Jianguo Xu, Dr.-Ing. Thomas Rickert and Prof. Dr.-Ing. Ulrich Hoffmann

      Article first published online: 2 FEB 2004 | DOI: 10.1002/ceat.270110149

    42. Evaporation and pervaporation of a binary mixture from an inert carrier liquid (pages 384–391)

      Dipl.-Ing. Thomas Riede and Prof. Dr.-Ing. Dr. h.c. INPL Ernst Ulrich Schlünder

      Article first published online: 2 FEB 2004 | DOI: 10.1002/ceat.270110150

    43. Kinetic investigation of methacrylic acid synthesis on hetropoly-compounds (pages 392–402)

      Dr.-Ing. Thomas Haeberle and Prof. Dr.-Ing. Gerhard Emig

      Article first published online: 2 FEB 2004 | DOI: 10.1002/ceat.270110151

    44. A new regenerable process for the recovery of SO2 (pages 402–407)

      Prof. Dr.-Ing. Olav Erga

      Article first published online: 2 FEB 2004 | DOI: 10.1002/ceat.270110152

    45. Two-phase flow in porous media (pages 407–424)

      Prof. Dr. Francis A. L. Dullien

      Article first published online: 2 FEB 2004 | DOI: 10.1002/ceat.270110153

    46. A new appraisal of mass transfer processes in zeolites by transient methods (pages 432–438)

      Dipl.-Ing. Jean-René Authelin, Dr. Daniel Schweich and Prof. Dr. Jacques Villermaux

      Article first published online: 2 FEB 2004 | DOI: 10.1002/ceat.270110155

    47. Less known behaviour of gas-solid reactions: The expanding core model in catalytic and non-catalytic systems (pages 438–447)

      Prof. Laxmangudi K. Doraiswamy and Dr. Ashok N. Gokarn

      Article first published online: 2 FEB 2004 | DOI: 10.1002/ceat.270110156

SEARCH

SEARCH BY CITATION