SEARCH

SEARCH BY CITATION

Cited in:

CrossRef

This article has been cited by:

  1. 1
    Zhaomin Lv, Xuefeng Yan, Qingchao Jiang, Batch process monitoring based on just-in-time learning and multiple-subspace principal component analysis, Chemometrics and Intelligent Laboratory Systems, 2014, 137, 128

    CrossRef

  2. 2
    Jialin Liu, David Shan Hill Wong, Ding-Sou Chen, Bayesian filtering of the smearing effect: Fault isolation in chemical process monitoring, Journal of Process Control, 2014, 24, 3, 1

    CrossRef

  3. 3
    Yuan Li, Xinmin Zhang, Diffusion maps based k-nearest-neighbor rule technique for semiconductor manufacturing process fault detection, Chemometrics and Intelligent Laboratory Systems, 2014, 136, 47

    CrossRef

  4. 4
    Jialin Liu, Ding-Sou Chen, Fault isolation using modified contribution plots, Computers & Chemical Engineering, 2014, 61, 9

    CrossRef

  5. 5
    Bei Wang, Xuefeng Yan, Qingchao Jiang, Zhaomin Lv, Generalized Dice's coefficient-based multi-block principal component analysis with Bayesian inference for plant-wide process monitoring, Journal of Chemometrics, 2014, 28, 11
  6. You have free access to this content6
    Julien Boccard, Serge Rudaz, Harnessing the complexity of metabolomic data with chemometrics, Journal of Chemometrics, 2014, 28, 1
  7. 7
    Zhiqiang Ge, Improved two-level monitoring system for plant-wide processes, Chemometrics and Intelligent Laboratory Systems, 2014, 132, 141

    CrossRef

  8. 8
    Yingwei Zhang, Shuai Li, Modeling and monitoring of nonlinear multi-mode processes, Control Engineering Practice, 2014, 22, 194

    CrossRef

  9. 9
    Qingchao Jiang, Xuefeng Yan, Monitoring multi-mode plant-wide processes by using mutual information-based multi-block PCA, joint probability, and Bayesian inference, Chemometrics and Intelligent Laboratory Systems, 2014, 136, 121

    CrossRef

  10. 10
    Ahmed Alawi, Jie Zhang, Julian Morris, Multiscale Multiblock Batch Monitoring: Sensor and Process Drift and Degradation, Organic Process Research & Development, 2014, 140425083009008

    CrossRef

  11. 11
    Yan Liu, Yuqing Chang, Fuli Wang, Online process operating performance assessment and nonoptimal cause identification for industrial processes, Journal of Process Control, 2014, 24, 10, 1548

    CrossRef

  12. 12
    Xiaoqiang Zhao, Yongfei Xue, Output-relevant fault detection and identification of chemical process based on hybrid kernel T-PLS, The Canadian Journal of Chemical Engineering, 2014, 92, 10
  13. 13
    Qingchao Jiang, Xuefeng Yan, Plant-wide process monitoring based on mutual information–multiblock principal component analysis, ISA Transactions, 2014, 53, 5, 1516

    CrossRef

  14. 14
    Jeong Jin Hong, Jie Zhang, Julian Morris, Progressive multi-block modelling for enhanced fault isolation in batch processes, Journal of Process Control, 2014, 24, 1, 13

    CrossRef

  15. 15
    Zhiqiang Ge, Quality prediction and analysis for large-scale processes based on multi-level principal component modeling strategy, Control Engineering Practice, 2014, 31, 9

    CrossRef

  16. 16
    Zhengbing Yan, Chien-Ching Huang, Yuan Yao, Semi-supervised mixture discriminant monitoring for chemical batch processes, Chemometrics and Intelligent Laboratory Systems, 2014, 134, 10

    CrossRef

  17. 17
    Yingwei Zhang, Chuanfang Zhang, Wei Zhang, Statistical Analysis of Nonlinear Processes Based on Penalty Factor, Mathematical Problems in Engineering, 2014, 2014, 1

    CrossRef

  18. 18
    Chunhui Zhao, Furong Gao, Youxian Sun, Between-phase calibration modeling and transition analysis for phase-based quality interpretation and prediction, AIChE Journal, 2013, 59, 1
  19. 19
    Sahar Hassani, Mohamed Hanafi, El Mostafa Qannari, Achim Kohler, Deflation strategies for multi-block principal component analysis revisited, Chemometrics and Intelligent Laboratory Systems, 2013, 120, 154

    CrossRef

  20. 20
    Zhiqiang Ge, Zhihuan Song, Distributed PCA Model for Plant-Wide Process Monitoring, Industrial & Engineering Chemistry Research, 2013, 52, 5, 1947

    CrossRef

  21. 21
    Chudong Tong, Yu Song, Xuefeng Yan, Distributed Statistical Process Monitoring Based on Four-Subspace Construction and Bayesian Inference, Industrial & Engineering Chemistry Research, 2013, 52, 29, 9897

    CrossRef

  22. 22
    Yingwei Zhang, Lingjun Zhang, Renquan Lu, Fault Identification of Nonlinear Processes, Industrial & Engineering Chemistry Research, 2013, 52, 34, 12072

    CrossRef

  23. 23
    Nicolas Mouton, Olivier Devos, Michel Sliwa, Anna de Juan, Cyril Ruckebusch, Multivariate curve resolution – Alternating least squares applied to the investigation of ultrafast competitive photoreactions, Analytica Chimica Acta, 2013, 788, 8

    CrossRef

  24. 24
    Yan Liu, Fuli Wang, Yuqing Chang, Online Fuzzy Assessment of Operating Performance and Cause Identification of Nonoptimal Grades for Industrial Processes, Industrial & Engineering Chemistry Research, 2013, 52, 50, 18022

    CrossRef

  25. 25
    Chunhui Zhao, Furong Gao, Subspace Decomposition-Based Reconstruction Modeling for Fault Diagnosis in Multiphase Batch Processes, Industrial & Engineering Chemistry Research, 2013, 52, 41, 14613

    CrossRef

  26. 26
    S. Perk, Q.M. Shao, F. Teymour, A. Cinar, An adaptive fault-tolerant control framework with agent-based systems, International Journal of Robust and Nonlinear Control, 2012, 22, 1
  27. 27
    Xueqin Liu, Kang Li, Marion McAfee, Jing Deng, Application of nonlinear PCA for fault detection in polymer extrusion processes, Neural Computing and Applications, 2012, 21, 6, 1141

    CrossRef

  28. 28
    Hae Woo Lee, Andrew Christie, Jin Xu, Seongkyu Yoon, Data fusion-based assessment of raw materials in mammalian cell culture, Biotechnology and Bioengineering, 2012, 109, 11
  29. 29
    Mihajlo Grbovic, Weichang Li, Peng Xu, Adam K. Usadi, Limin Song, Slobodan Vucetic, Decentralized fault detection and diagnosis via sparse PCA based decomposition and Maximum Entropy decision fusion, Journal of Process Control, 2012, 22, 4, 738

    CrossRef

  30. 30
    Yingwei Zhang, Chi Ma, Decentralized fault diagnosis using multiblock kernel independent component analysis, Chemical Engineering Research and Design, 2012, 90, 5, 667

    CrossRef

  31. 31
    Yingwei Zhang, Shuai Li, Zhiyong Hu, Chonghui Song, Dynamical process monitoring using dynamical hierarchical kernel partial least squares, Chemometrics and Intelligent Laboratory Systems, 2012, 118, 150

    CrossRef

  32. 32
    Qiang Liu, Tianyou Chai, S. Joe Qin, Fault diagnosis of continuous annealing processes using a reconstruction-based method, Control Engineering Practice, 2012, 20, 5, 511

    CrossRef

  33. 33
    Jialin Liu, Fault diagnosis using contribution plots without smearing effect on non-faulty variables, Journal of Process Control, 2012, 22, 9, 1609

    CrossRef

  34. 34
    Yingwei Zhang, Shuai Li, Zhiyong Hu, Improved multi-scale kernel principal component analysis and its application for fault detection, Chemical Engineering Research and Design, 2012, 90, 9, 1271

    CrossRef

  35. 35
    Sahar Hassani, Harald Martens, El Mostafa Qannari, Mohamed Hanafi, Achim Kohler, Model validation and error estimation in multi-block partial least squares regression, Chemometrics and Intelligent Laboratory Systems, 2012, 117, 42

    CrossRef

  36. 36
    Yun Xu, Royston Goodacre, Multiblock principal component analysis: an efficient tool for analyzing metabolomics data which contain two influential factors, Metabolomics, 2012, 8, S1, 37

    CrossRef

  37. 37
    Ricardo Dunia, Thomas F. Edgar, Terry Blevins, Willy Wojsznis, Multistate analytics for continuous processes, Journal of Process Control, 2012, 22, 8, 1445

    CrossRef

  38. 38
    Chunhui Zhao, Furong Gao, Youxian Sun, Statistical Modeling and Online Monitoring Based on Between-Set Regression Analysis, Industrial & Engineering Chemistry Research, 2012, 51, 25, 8495

    CrossRef

  39. 39
    S. Joe Qin, Survey on data-driven industrial process monitoring and diagnosis, Annual Reviews in Control, 2012, 36, 2, 220

    CrossRef

  40. 40
    Chunhui Zhao, Furong Gao, Two-step Multiset Regression Analysis (MsRA) Algorithm, Industrial & Engineering Chemistry Research, 2012, 51, 3, 1337

    CrossRef

  41. 41
    Jason Chao-Hsien Pan, Damon HE Tai, A new strategy for defect inspection by the virtual inspection in semiconductor wafer fabrication, Computers & Industrial Engineering, 2011, 60, 1, 16

    CrossRef

  42. 42
    Sinem Perk, Fouad Teymour, Ali Cinar, Adaptive Agent-Based System for Process Fault Diagnosis, Industrial & Engineering Chemistry Research, 2011, 50, 15, 9138

    CrossRef

  43. 43
    Carlos F. Alcala, S. Joe Qin, Analysis and generalization of fault diagnosis methods for process monitoring, Journal of Process Control, 2011, 21, 3, 322

    CrossRef

  44. 44
    Mohamed Hanafi, Achim Kohler, El-Mostafa Qannari, Connections between multiple co-inertia analysis and consensus principal component analysis, Chemometrics and Intelligent Laboratory Systems, 2011, 106, 1, 37

    CrossRef

  45. 45
    Jialin Liu, Data-driven fault detection and isolation for multimode processes, Asia-Pacific Journal of Chemical Engineering, 2011, 6, 3
  46. 46
    Chunhui Zhao, Furong Gao, Dapeng Niu, Fuli Wang, Enhanced process comprehension and quality analysis based on subspace separation for multiphase batch processes, AIChE Journal, 2011, 57, 2
  47. 47
    Stéphanie Bougeard, El Mostafa Qannari, Nicolas Rose, Multiblock redundancy analysis: interpretation tools and application in epidemiology, Journal of Chemometrics, 2011, 25, 9
  48. 48
    Chunhui Zhao, Furong Gao, Multiphase calibration modeling and quality interpretation by priority sorting, Chemical Engineering Science, 2011, 66, 21, 5400

    CrossRef

  49. 49
    Yingwei Zhang, Zhiyong Hu, Multivariate process monitoring and analysis based on multi-scale KPLS, Chemical Engineering Research and Design, 2011, 89, 12, 2667

    CrossRef

  50. 50
    Yingwei Zhang, Zhiyong Hu, On-line batch process monitoring using hierarchical kernel partial least squares, Chemical Engineering Research and Design, 2011, 89, 10, 2078

    CrossRef

  51. 51
    Chunhui Zhao, Furong Gao, Fuli Wang, Spectra data analysis and calibration modeling method using spectra subspace separation and multiblock independent component regression strategy, AIChE Journal, 2011, 57, 5
  52. 52
    Q. Peter He, Jin Wang, Statistics pattern analysis: A new process monitoring framework and its application to semiconductor batch processes, AIChE Journal, 2011, 57, 1
  53. 53
    Ying-wei Zhang, Yong-dong Teng, Adaptive multiblock kernel principal component analysis for monitoring complex industrial processes, Journal of Zhejiang University SCIENCE C, 2010, 11, 12, 948

    CrossRef

  54. 54
    N. Dupuy, O. Galtier, D. Ollivier, P. Vanloot, J. Artaud, Comparison between NIR, MIR, concatenated NIR and MIR analysis and hierarchical PLS model. Application to virgin olive oil analysis, Analytica Chimica Acta, 2010, 666, 1-2, 23

    CrossRef

  55. 55
    Yingwei Zhang, Hong Zhou, S.J. Qin, Tianyou Chai, Decentralized Fault Diagnosis of Large-Scale Processes Using Multiblock Kernel Partial Least Squares, IEEE Transactions on Industrial Informatics, 2010, 6, 1, 3

    CrossRef

  56. 56
    Ying-Wei ZHANG, S. Joe QIN, Decentralized Fault Diagnosis of Large-scale Processes Using Multiblock Kernel Principal Component Analysis, Acta Automatica Sinica, 2010, 36, 4, 593

    CrossRef

  57. 57
    Ying-Wei ZHANG, Hong ZHOU, S. Joe QIN, Decentralized Fault Diagnosis of Large-scale Processes Using Multiblock Kernel Principal Component Analysis, Acta Automatica Sinica, 2010, 36, 4, 593

    CrossRef

  58. 58
    Richard P. Good, Daniel Kost, Gregory A. Cherry, Introducing a Unified PCA Algorithm for Model Size Reduction, IEEE Transactions on Semiconductor Manufacturing, 2010, 23, 2, 201

    CrossRef

  59. 59
    Qinghua Peter He, Jin Wang, Large-Scale Semiconductor Process Fault Detection Using a Fast Pattern Recognition-Based Method, IEEE Transactions on Semiconductor Manufacturing, 2010, 23, 2, 194

    CrossRef

  60. 60
    Cheng-Chih Li, Jyh-Cheng Jeng, Multiple sensor fault diagnosis for dynamic processes, ISA Transactions, 2010, 49, 4, 415

    CrossRef

  61. 61
    Ming Jing, Wensheng Cai, Xueguang Shao, Quantitative Determination of the Components in Corn and Tobacco Samples by Using Near-Infrared Spectroscopy and Multiblock Partial Least Squares, Analytical Letters, 2010, 43, 12, 1910

    CrossRef

  62. 62
    Diana L. S. Ferreira, Sila Kittiwachana, Louise A. Fido, Duncan R. Thompson, Richard E. A. Escott, Richard G. Brereton, Window consensus PCA for multiblock statistical process control: adaption to small and time-dependent normal operating condition regions, illustrated by online high performance liquid chromatography of a three-stage continuous process, Journal of Chemometrics, 2010, 24, 9
  63. 63
    Yuan Yao, Furong Gao, A survey on multistage/multiphase statistical modeling methods for batch processes, Annual Reviews in Control, 2009, 33, 2, 172

    CrossRef

  64. 64
    Simeone Zomer, Sarah J. Dixon, Yun Xu, Susanne P. Jensen, Huitu Wang, Clare V. Lanyon, Anthony G. O'Donnell, Anthony S. Clare, L. Morris Gosling, Dustin J. Penn, Richard G. Brereton, Consensus multivariate methods in gas chromatography mass spectrometry and denaturing gradient gel electrophoresis: MHC-congenic and other strains of mice can be classified according to the profiles of volatiles and microflora in their scent-marks, The Analyst, 2009, 134, 1, 114

    CrossRef

  65. 65
    Junghui Chen, Ren-Kai Tsai, Development of MBPLS based control for serial operation processes, Korean Journal of Chemical Engineering, 2009, 26, 4, 935

    CrossRef

  66. 66
    Hae Woo Lee, Min Woo Lee, Jong Moon Park, Multi-scale extension of PLS algorithm for advanced on-line process monitoring, Chemometrics and Intelligent Laboratory Systems, 2009, 98, 2, 201

    CrossRef

  67. 67
    Tao Chen, Yue Sun, Probabilistic contribution analysis for statistical process monitoring: A missing variable approach, Control Engineering Practice, 2009, 17, 4, 469

    CrossRef

  68. 68
    Shih-Wei Lin, Shih-Chieh Chen, PSOLDA: A particle swarm optimization approach for enhancing classification accuracy rate of linear discriminant analysis, Applied Soft Computing, 2009, 9, 3, 1008

    CrossRef

  69. 69
    Carlos F. Alcala, S. Joe Qin, Reconstruction-based contribution for process monitoring, Automatica, 2009, 45, 7, 1593

    CrossRef

  70. 70
    Gang LI, Si-Zhao QIN, Yin-Dong JI, Dong-Hua ZHOU, Total PLS Based Contribution Plots for Fault Diagnosis, Acta Automatica Sinica, 2009, 35, 6, 759

    CrossRef

  71. 71
    Gang LI, Si-Zhao QIN, Yin-Dong JI, Dong-Hua ZHOU, Total PLS Based Contribution Plots for Fault Diagnosis, Acta Automatica Sinica, 2009, 35, 6, 759

    CrossRef

  72. 72
    Zhiqiang Ge, Zhihuan Song, Two-level multiblock statistical monitoring for plant-wide processes, Korean Journal of Chemical Engineering, 2009, 26, 6, 1467

    CrossRef

  73. 73
    Jeong Jin Hong, Jie Zhang, Julian Morris, 19th European Symposium on Computer Aided Process Engineering, 2009,

    CrossRef

  74. 74
    T. Kourti, Comprehensive Chemometrics, 2009,

    CrossRef

  75. 75
    Jialin Liu, David Shan Hill Wong, Fault detection and classification for a two-stage batch process, Journal of Chemometrics, 2008, 22, 6
  76. 76
    Ashraf AlGhazzawi, Barry Lennox, Monitoring a complex refining process using multivariate statistics, Control Engineering Practice, 2008, 16, 3, 294

    CrossRef

  77. 77
    Chris W. L. Wong, Richard Escott, Elaine Martin, Julian Morris, The integration of spectroscopic and process data for enhanced process performance monitoring, The Canadian Journal of Chemical Engineering, 2008, 86, 5
  78. 78
    Q. Peter He, Jin Wang, Fault Detection Using the k-Nearest Neighbor Rule for Semiconductor Manufacturing Processes, IEEE Transactions on Semiconductor Manufacturing, 2007, 20, 4, 345

    CrossRef

  79. 79
    Chunhui Zhao, Fuli Wang, Ningyun Lu, Mingxing Jia, Stage-based soft-transition multiple PCA modeling and on-line monitoring strategy for batch processes, Journal of Process Control, 2007, 17, 9, 728

    CrossRef

  80. 80
    M. Hanafi, G. Mazerolles, E. Dufour, E. M. Qannari, Common components and specific weight analysis and multiple co-inertia analysis applied to the coupling of several measurement techniques, Journal of Chemometrics, 2006, 20, 5
  81. 81
    G.A. Cherry, S.J. Qin, Multiblock Principal Component Analysis Based on a Combined Index for Semiconductor Fault Detection and Diagnosis, IEEE Transactions on Semiconductor Manufacturing, 2006, 19, 2, 159

    CrossRef

  82. 82
    Q. Peter He, S. Joe Qin, Jin Wang, A new fault diagnosis method using fault directions in Fisher discriminant analysis, AIChE Journal, 2005, 51, 2
  83. 83
    Theodora Kourti, Application of latent variable methods to process control and multivariate statistical process control in industry, International Journal of Adaptive Control and Signal Processing, 2005, 19, 4
  84. 84
    Aleksander Jaworski, Kazimierz Wikiel, Hanna Wikiel, Application of Multiblock and Hierarchical PCA and PLS Models for Analysis of AC Voltammetric Data, Electroanalysis, 2005, 17, 15-16
  85. 85
    Young-Hak Lee, Minjin Kim, Chonghun Han, Application of Multivariate Statistical Models to Prediction of Emissions from Complex Industrial Heater Systems, Journal of Environmental Engineering, 2005, 131, 6, 961

    CrossRef

  86. 86
    Sang Wook Choi, In-Beum Lee, Multiblock PLS-based localized process diagnosis, Journal of Process Control, 2005, 15, 3, 295

    CrossRef

  87. 87
    Leo H. Chiang, Mark E. Kotanchek, Arthur K. Kordon, Fault diagnosis based on Fisher discriminant analysis and support vector machines, Computers & Chemical Engineering, 2004, 28, 8, 1389

    CrossRef

  88. 88
    Leo H. Chiang, Randy J. Pell, Genetic algorithms combined with discriminant analysis for key variable identification, Journal of Process Control, 2004, 14, 2, 143

    CrossRef

  89. 89
    Seongkyu Yoon, John F. MacGregor, Principal-component analysis of multiscale data for process monitoring and fault diagnosis, AIChE Journal, 2004, 50, 11
  90. 90
    Age K. Smilde, Johan A. Westerhuis, Sijmen de Jong, A framework for sequential multiblock component methods, Journal of Chemometrics, 2003, 17, 6
  91. You have free access to this content91
    Zdravko I. Stefanov, Karlene A. Hoo, Hierarchical multivariate analysis of cockle phenomena, Journal of Chemometrics, 2003, 17, 10
  92. 92
    Cheng-Chih Li, Hsiao-Ping Huang, Model Building by Merging Submodels Using PLSR, JOURNAL OF CHEMICAL ENGINEERING OF JAPAN, 2003, 36, 9, 1023

    CrossRef

  93. You have free access to this content93
    Dae Sung Lee, Peter A. Vanrolleghem, Monitoring of a sequencing batch reactor using adaptive multiblock principal component analysis, Biotechnology and Bioengineering, 2003, 82, 4
  94. 94
    Theodora Kourti, Multivariate dynamic data modeling for analysis and statistical process control of batch processes, start-ups and grade transitions, Journal of Chemometrics, 2003, 17, 1
  95. 95
    Xun Wang, Uwe Kruger, Barry Lennox, Recursive partial least squares algorithms for monitoring complex industrial processes, Control Engineering Practice, 2003, 11, 6, 613

    CrossRef

  96. 96
    S. Joe Qin, Statistical process monitoring: basics and beyond, Journal of Chemometrics, 2003, 17, 8-9
  97. 97
    Young-Hak Lee, Kyong-U Yun, Minjin Kim, Chonghun Han, Process Systems Engineering 2003, 8th International Symposium on Process Systems Engineering, 2003,

    CrossRef

  98. 98
    T. Kourti, Process analysis and abnormal situation detection: from theory to practice, IEEE Control Systems Magazine, 2002, 22, 5, 10

    CrossRef

  99. 99
    Yuan Yao, Furong Gao, Multivariate Statistical Process Control,
  100. 100
    Theodora Kourti, Pharmaceutical Manufacturing: The Role of Multivariate Analysis in Design Space, Control Strategy, Process Understanding, Troubleshooting, and Optimization,
  101. 101
    References,