SEARCH

SEARCH BY CITATION

REFERENCES

  • Akita, K. and F. Yoshida, “Gas Holdup and Volumetric Mass Transfer Coefficient in Bubble Columns-Effects of Liquid Properties,” Ind. Eng. Chem. Proc. Des. Dev. 12(1), 7680 (1973).
  • Anabtawi, M. Z. A., S. I. Abu-Eishah, N. Hilal and M. B. W. Nabhan, “Hydrodynamic Studies in Both Bi-Dimensional and Three-Dimensional Bubble Columns with a Single Sparger,” Chem. Eng. Process. 42, 403408 (2003).
  • Bando, Y. M., S. Chaya, K. Hamano, M. Yasuda, K. Nakamura and M. Osada, “Effect of Liquid Height on Flow Characteristics in Bubble Column using Highly Viscous Liquid,” J. Chem. Eng. Jpn 36(5), 523529 (2003).
  • Behkish, A., R. Lemoine, L. Sehabiague, R. Oukaci and B. I. Morsi, “Prediction of the Gas Holdup in Industrial-Scale Bubble Columns and Slurry Bubble Column Reactors using Back-Propagation Neural Networks,” Int. J. Chem. Reactor Eng. 3, 135 (2005).
  • Behkish, A., R. R. Lemoine, B. Oukaci and B. I. Morsi, “Novel Correlations for Gas Holdup in Large-Scale Slurry Bubble Column Reactors Operating under Elevated Pressures and Temperatures,” Chem. Eng. J. 115, 157171 (2006).
  • Bhaga, D., B. B. Pruden and M. E. Weber, “Gas Holdup in a Bubble Column Containing Organic Liquid Mixtures,” Can. J. Chem. Eng. 49(3), 417420 (1971).
  • Botton, R., D. Cosserat and J. C. Charpentier, “Influence of Column Diameter and High Gas Throughputs on the Operation of a Bubble Column,” Chem. Eng. J. 16, 107115 (1978).
  • Braulik, W. J., J. R. Fair and B. J. Lerner, “Mass Transfer in a Sparged Contactor: Part 1. Physical Mechanisms and Controlling Parameters,” AlChE J. 11(1), 7379 (1965).
  • Buchholz, R., J. Tsepetonides, J. Steincmann and U. Onken, “Influence of Gas Distribution on Interfacial Area and Mass Transfer in Bubble Columns,” Ger. Chem. Eng. 2, 105113 (1978).
  • Buchholz, R., J. Tsepetonides, J. Steincmann and U. Onken, “Influence of Gas Distribution on Interfacial Area and Mass Transfer in Bubble Columns,” Ger. Chem. Eng. 6, 105113 (1983).
  • Bukur, D. B. and J. G. Daly, “Gas Hold-up in Bubble Columns for Fischer-Tropsch Synthesis,” Chem. Eng. Sci. 42(12), 29672969 (1987).
  • Camarasa, E., C. Vial, S. Poncin, G. Wild, N. Midoux and J. Bouillard, “Influence of Coalescence Behaviour of the Liquid and of Gas Sparging on Hydrodynamics and Bubble Characteristics in a Bubble Column,” Chem. Eng. Process. 38, 329344 (1999).
  • Chabot, J. and H. I. de Lasa, “Gas Holdups and Bubble Characteristics in a Bubble Column Operated at High Temperature,” Ind. Eng. Chem. Res. 32, 25952601 (1993).
  • Chang, C.-C. and C.-J. Lin, “LIBSVM: A library for Support Vector Machines,” Software available at http://www.csie.ntu.edu.tw/∼cjlin/libsvm (2001).
  • Chaumat, H., A. M. Billet-Duquenne, F. Augier, C. Mathieu and H. Delmas, “Mass Transfer in Bubble Column for Industrial Conditions-Effects of Organic Medium, Gas and Liquid Flow Rates and Column Design,” Chem. Eng. Sci. 60, 59305936 (2005).
  • Clark, K. N., “The Effect of High Pressure and Temperature on Phase Distribution in a Bubble Column,” Chem. Eng. Sci. 45(8), 23012307 (1990).
  • Daly, J. G., S. A. Patel and D. B. Bukur, “Measurement of Gas Holdup and Sauter Mean Bubble Diameters in Bubble Column Reactors by Dynamic Gas Disengagement Method,” Chem. Eng. Sci. 47(13–14), 36473654 (1992).
  • Deckwer, W. D., R. Burckhart and G. Zoll, “Mixing and Mass Transfer in Tall Bubble Columns,” Chem. Eng. Sci. 3, 21772188 (1974).
  • Deckwer, W. D., I. Adler and A. Zaidi, “Comprehensive Study on CO2-Interphase Mass Transfer in Vertical Cocurrent and Countercurrent Gas–Liquid Flow,” Can. J. Chem. Eng. 56(1), 4355 (1978).
  • Deckwer, W. D., K. Nguyen-Tien, A. Schumpe and Y. Serpemen, “Oxygen Mass Transfer into Aerated CMC Solutions in a Bubble Column,” Biotechnol. Bioeng. 24, 461472 (1982).
  • Desai, K., Y. Badhe, S. S. Tambe and B. D. Kulkarni, “Soft-Sensor Development for Fed-Batch Bioreactors using Support Vector Regression,” Biochem. Eng. J. 27, 225239 (2006).
  • Devine, W., Y. Shah and B. Morsi, “Liquid Phase Axial Mixing in a Bubble Column with Viscous non-Newtonian Liquids,” Can. J. Chem. Eng. 63(1), 195201 (1985).
  • Eickenbusch, H. P., O. Brunn and A. Schumpe, “Mass Transfer into Viscous Pseudoplastic Liquid in Large-Diameter Bubble Columns,” Chem. Eng. Pro. 34, 479485 (1995).
  • Eissa, S. H. and L. K. Schugerl, “Holdup and Back Mixing Investigations in Co Current and Countercurrent Bubble Columns,” Chem. Eng. Sci. 30, 12511256 (1975).
  • Ellenberger, J. and R. Krishna, “A Unified Approach to the Scale-up of Gas-Solid Fluidized Bed and Gas–Liquid Bubble Column Reactors,” Chem. Eng. Sci. 49(248), 53915411 (1994).
  • Fair, J. R., A. J. Lambright and J. W. Andersen, “Heat Transfer and Gas Holdup in a Spargerd Contactor,” Ind. Eng. Chem. Res. 1(1), 3336 (1962).
  • Fransolet, E., M. Crine, P. Marchot and D. Toye, “Analysis of Gas Hold-up in Bubble Columns with Non-Newtonian Fluid Using Electrical Resistance Tomography and Dynamic Gas Disengagement Technique,” Chem. Eng. Sci. 60, 61186125 (2005).
  • Gandhi, A. B., J. B. Joshi, V. K. Jayaraman and B. D. Kulkarni, “Development of Support Vector Regression (SVR)-Based Correlation for Prediction of Overall Gas Hold-Up in Bubble Column Reactors for Various Gas–Liquid Systems,” Chem. Eng. Sci. 62, 70787085 (2007).
  • Gharat, S. D. and J. B. Joshi, “Transport Phenomena in Bubble Column Reactors II: Pressure Drop,” Chem. Eng. J. 48, 153166 (1992).
  • Godbole, S. P., M. F. Honath and Y. T. Shah, “Holdup Structure in Highly Viscous Newtonian and Non-Newtonian Liquids in Bubble Columns,” Chem. Eng. Commun. 16, 119134 (1982).
  • Godbole, S. P., A. Schumpe, Y. T. Shah and N. L. Carr, “Hydrodynamics and Mass Transfer in non-Newtonian Solutions in a Bubble Column,” AIChE J. 30, 213223 (1984).
  • Goldberg, D. E., “Genetic Algorithms in Search, Optimization and Machine Learning,” Kluwer Academic Publishers, Boston, MA (1989).
  • Grund, G., A. Schumpe and W.-D. Deckwer, “Gas–Liquid Mass Transfer in a Bubble Column with Organic Liquids,” Chem. Eng. Sci. 47(13–14), 35093516 (1992).
  • Gupta, P. P., S. S. Merchant, A. U. Bhat, A. B. Gandhi, S. S. Bhagwat, J. B. Joshi, V. K. Jayaraman and B. D. Kulkarni, “Development of Correlations for Overall Gas Hold-Up, Volumetric Mass Transfer Coefficient and Effective Interfacial Area in Bubble Column Reactors Using Hybrid Genetic Algorithm-Support Vector Regression Technique: Viscous Newtonian and non-Newtonian Liquids,” Ind. Eng. Chem. Res. 48, 96319654 (2009).
  • Guy, C., J. Carreau and J. Paris, “Mixing Characteristic and Gas Hold-Up of a Bubble Column,” Can. J. Chem. Eng. 64(1), 2335 (1986).
  • Han, L. and M. H. Al-Dahhan, “Gas–Liquid Mass Transfer in a High Pressure Bubble Column Reactor with Different Sparger Designs,” Chem. Eng. Sci. 62(1–2), 131139 (2007).
  • Haque, M., K. Nigam and J. B. Joshi, “Hydrodynamics and Mixing Studies in Highly Viscous Pseudo-Plastic Non-Newtonian Solutions in Bubble Column,” Chem. Eng. Sci. 41, 23212331 (1986).
  • Hikita, H. and H. Kikukuwa, “Liquid-Phase Mixing in Bubble Columns: Effect of Liquid Properties,” Chem. Eng. J. 8, 191197 (1974).
  • Hikita, H., S. Asai, K. Tanigawa, K. Segawa and M. Kitao, “Gas Hold-Up in Bubble Columns,” Chem. Eng. J. 20, 5967 (1980).
  • Hugmark, G. A., “Holdup and Mass Transfer in Bubble Columns,” Ind. Eng. Chem. Res. 6(2), 218220 (1988).
  • Istadi, N. and A. S. Amin, “Hybrid Artificial Neural Network-Genetic Algorithm Technique for Modeling and Optimization of Plasma Reactor,” Ind. Eng. Chem. Res. 45, 66556665 (2006).
  • Jamialahmadi, M. and H. Muller-Steinhagen, “Effect of Electrolyte Concentration on Bubble Size and Gas Hold-up in Bubble Columns,” Chem. Eng. Res. Des. 68(2), 202204 (1990).
  • Jordan, U. and A. Schumpe, “The Gas Density Effect on Mass Transfer in Bubble Columns with Organic Liquids,” Chem. Eng. Sci. 56, 62676272 (2001).
  • Joshi, J. B., U. P. Veera, C. V. Prasad, D. V. Phanilumar, N. S. Deshphande, S. S. Thakre and B. N. Thorat, “Gas Hold-Up Structures in Bubble Column Reactors,” PINSA 64(A), 441567 (1998).
  • Kastanek, F., M. Zahradnik and R. J. Kratochvil, “Scaling-up of Bubble Column Reactors on Basis of Laboratory Data,” Chem. Eng. Sci. 35, 456462 (1980).
  • Kataoka, H., H. Takeuchi, K. Nakao, H. Yagi, T. Tadaki, T. Otake, T. Miyauchi, K. Washimi, K. Watanabi and F. Yoshida, “Mass Transfer in a Large Bubble Column,” J. Chem. Eng. Jpn 12(2), 105110 (1979).
  • Kato, Y. and A. Nishiwaki, “Longitudinal Dispersion Coefficient of a Liquid in a Bubble Column,” Int. Chem. Eng. 12(1), 182187 (1972).
  • Kato, Y., A. Nishiwai, T. Kago, T. Fukuta and S. Tanaka, “Gas Holdup and Overall Volumetric Absorption Coefficient in Bubble Columns with Suspended Solid Particles. Absorption Rate of Oxygen by an Aqueous Solution of Sodimu Sulfite,” Int. Chem. Eng. 13(3), 562567 (1973).
  • Kawase, Y., and M. Moo-Young, “Oxygen Transfer Inslurry Bioreactors,” Biotechnol. Bioeng. 37, 960966 (1991).
  • Kawase, Y., and M. Moo-Young, “Turbulence Intensity in Bubble Columns,” The Chem. Eng. J. 40(1), 5558 (1987).
  • Kelkar, B. G., S. R. Phulgaonkar and Y. T. Shah, “The Effect of Electrolyte Solutions on Hydrodynamics and Back Mixing Characteristics in Bubble Columns,” Chem. Eng. J. 27, 125133 (1983).
  • Kluytmans, J. H. J., B. G. M. van Wachem, B. F. M. Kuster and J. C. Schouten, “Gas Holdup in a Slurry Bubble Column: Influence of Electrolyte and Carbon Particles,” Ind. Eng. Chem. Res. 40, 53265333 (2001).
  • Koide, K., S. Morooka, K. Ueyama, A. Matsuura, F. Yamashita, S. Iwamoto, Y. Kato, H. Inque, M. Shigeta, S. Suzuki and T. Akehata, “Behavior of Bubbles in Large Scale Bubble Column,” J. Chem. Eng. Jpn 12(2), 98104 (1979).
  • Koide, K., A. Takazawa, M. Komura and H. Matsunaga, “Gas Holdup and Volumetric Liquid-Phase Mass Transfer Coefficient in Solid-Suspended Bubble Columns,” J. Chem. Eng. Jpn 17(6), 459466 (1984).
  • Kojima, H., J. Sawai and H. Suzuki, “Effect of Pressure on Volumetric Mass Transfer Coefficient and Gas Holdup in Bubble Column,” Chem. Eng. Sci. 52(21–22), 41114116 (1997).
  • Krishna, R. and J. Ellenberger, “Gas Holdup in Bubble Column Reactors Operating in the Churn-Turbulent Flow Regime,” AIChE J. 42(9), 26272634 (1996).
  • Krishna, R., P. M. Wilkinson and L. L. Van dierendonck, “A Model for Gas Holdup in Bubble Columns Incorporating the Influence of Gas Density on Flow Regime Transitions,” Chem. Eng. Sci. 46(10), 24912496 (1991).
  • Krishna, R., M. I. Urseanu and A. J. Dreher, “Gas Hold-Up in Bubble Columns: Influence of Alcohol Addition Versus Operation at Elevated Pressures,” Chem. Eng. Process. 39, 371378 (2000).
  • Lakota, A., “Effect of Highly Viscous Non-Newtonian Liquids on Gas Hold-Up in a Concurrent Upflow Bubble Column,” Acta Chim. Slov. 54, 678685 (2007).
  • Lau, R., W. Peng, L. G. Velazquez-Vargas, G. Q. Yang and L. S. Fan, “Gas–Liquid Mass Transfer in High-Pressure Bubble Columns,” Ind. Eng. Chem. Res. 43, 13021311 (2004).
  • Lemoine, R., A. Behkish and B. I. Morsi, “Hydrodynamic and Mass-Transfer Characteristics in Organic Liquid Mixtures in a Large-Scale Bubble Column Reactor for the Toluene Oxidation Process,” Ind. Eng. Chem. Res. 43, 61956212 (2004).
  • Letzel, H. M., J. C. Schouten, R. Krishna and C. M. van den Bleek, “Gas Holdup and Mass Transfer in Bubble Column Reactors Operated at Elevated Pressure,” Chem. Eng. Sci. 54, 22372246 (1999).
  • Li, H., A. Prakash, A. Margaritis and M. A. Bergougnou, “Effects of Micron-Sized Particles on Hydrodynamics and Local Heat Transfer in a Slurry Bubble Column,” Powder Technol. 133, 171184 (2003).
  • Lin, T. J., K. Tsuchiya, and L. S. Fan, “Bubble Flow Characteristics in Bubble Columns at Elevated Pressure and Temperature,” AIChE J. 44, 545550 (1998).
  • Luo, X., P. Jiang, and L. -S. Fan, “High-Pressure Three-Phase Fluidization: Hydrodynamics and Heat Transfer,” AICHE J. 43(10), 24322445 (1997).
  • Luo, Y., J. Wen, M. Liu and Z. Hu, “Measuring and Modeling of Gas Holdup and Liquid Axial Velocity in a Countercurrent Bubble Column,” Int. J. Chem. Reactor Eng. 14(1), 111119 (1998).
  • Mouza, A. A., G. K. Dalakoglou and S. V. Paras, “Effect of Liquid Properties on the Performance of Bubble Column Reactors with Fine Porous Spargers,” Chem. Eng. Sci. 60, 14651475 (2005).
  • Nandi, S., Y. Badhe, J. Lonari, U. Sridevi, B. S. Rao, S. S. Tambe and B. D. Kulkarni, “Hybrid Process Modeling and Optimization Strategies Integrating Neural Networks/Support Vector Regression and Genetic Algorithms: Study of Benzene Isopropylation on Hbeta Catalyst,” Chem. Eng. J. 97, 115129 (2004).
  • Oels, U., J. Lucke, R. Buchholz and K. Schugerl, “Influence of Gas Distributor Type and Composition of Liquid on the Behavior of a Bubble Column Bioreactor,” Ger. Chem. Eng. 1, 115129 (1978).
  • Ohki, Y. and H. Inque, “Longitudinal Mixing of the Liquid Phase in Bubble Columns,” Chem. Eng. Sci. 25, 126 (1970).
  • Oyevaar, M. H., R. Bos and K. R. Westerterpx, “Interfacial Areas and Gas Hold-Ups in Gas–Liquid Contactors at Elevated Pressures from 0.1 to 0.8 Mpa,” Chem. Eng. Sci. 46, 12171231 (1991).
  • Ozturk, S. S., A. Schumpe and W.-D. Deckwer, “Organic Liquids in a Bubble Column: Holdups and Mass Transfer Coefficients,” AIChE J. 33(9), 14731480 (1987).
  • Pandit, A. B. and J. B. Joshi, “Mixing in Mechanically Agitated Gas–Liquid Contactors, Bubble Columns, and Modified Bubble Columns,” Chem. Eng. Sci. 38(8), 11891215 (1983).
  • Popovic, M. and C. W. Robinson, “The Specific Interfacial Area in External Circulation Loop Airlifts and a Bubble Column I. Aqueous Sodium Sulphite Solution,” Chem. Eng. Sci. 42(12), 28112824 (1987).
  • Posarac, D. and M. N. Tekic, “Gas Holdup and Volumetric Mass Transfer Coefficient in Bubble Columns with Dilute Alcohol Solutions,” AIChE J. 33(3), 497499 (1987).
  • Reilly, I. G., D. S. Scott, T. J. W. De Bruijin and J. Piskorz, “A Correlation for Gas Holdup in Turbulent Coalescing Bubble Columns,” Can. J. Chem. Eng. 64(5), 705717 (1986).
  • Reilly, I. G., D. S. Scott, T. J. W. De Bruijin and D. MacIntyre, “The Role of Gas Phase Momentum in Determining Gas Holdup and Hydrodynamic Flow Regimes in Bubble Column Operations,” Can. J. Chem. Eng. 72(1), 312 (1994).
  • Reith, T., S. Renken and B. A. Israel, “Gas Hold-Up and Axial Mixing in the Fluid Phase of Bubble Columns,” Chem. Eng. Sci. 23, 619629 (1968).
  • Renjun, Z., X. Jiang, B. Li, Y. Zu and L. Zhang, “Studies on Gas Holdup in a Bubble Column Operated at Elevated Temperatures,” Ind. Eng. Chem. Res. 27, 19101916 (1988).
  • Ruzicka, M. C., M. M. Vecer, S. Orvalho and J. Drahoš, “Effect of Surfactant on Homogeneous Regime Stability in Bubble Column,” Chem. Eng. Sci. 63(4), 951967 (2008).
  • Salvacion, L. J., M. Muruyama, K. Ohtaguchi and K. Koide, “Effects of Alcohols on Gas Holdup and Volumetric Liquid Phase Mass Transfer Coefficient in Gel-Particle-Suspended Bubble Column,” J. Chem. Eng. Jpn 28(4), 434441 (1995).
  • Schügerl, K., J. Lücke, and U. Oels, “Bubble Column Bioreactors:Tower Bioreactors Without Mechanical Agitation,” Adv. Biochem. Eng. Biotechnol. 7, 184 (1977).
  • Schumpe, A. and W. D. Deckwer, “Comparison of the Photographic and the Sulfite Oxidation Method for Interfacial Area Determination in Bubble Columns,” Chem. Eng. Commun. 17, 313324 (1982).
  • Schumpe, A. and G. Grund, “Gas Disengagement Technique for Studying Gas Holdup Structure in Bubble Columns,” Can. J. Chem. Eng. 64(6), 891896 (1986).
  • Shaikh, A. and M. Al-Dahhan, “Development of an Artificial Neural Network Correlation for Prediction of Overall Gas Holdup in Bubble Column Reactors,” Chem. Eng. Process. 42, 599610 (2003).
  • Sharma, M. M., R. A. Mashelkar and V. D. Mehta, “Mass Transfer in Plate Columns,” Brit. Chem. Eng. 14(1), 7076 (1969).
  • Smola, A. J. and B. Scholkopf, “A Tutorial on Support Vector Regression,” Stat. Comput. 14, 199222 (2004).
  • Stegeman, D. P. A., A. J. Knop, K. R. Wijnands and P. Westerter, “Interfacial Area and Gas Hold-Ups in Bubble Column Reactors at Elevated Pressures,” Ind. Eng. Chem. Res. 35, 38423853 (1996).
  • Tarmy, B. L., M. Chang, C. A. Coulaloglou and P. R. Ponzi, “The Three Hydrodynamic Characteristics of the EDS Coal Liquefaction Reactors: Their Development and Use in Reactor Scaleup,” I. Chem. E Symposium Series 87, 303–317 (1984).
  • Thorat, B. N., A. V. Shevade, K. R. Bhilegaonkar, R. H. Agalave, U. Parasu Veera, S. S. Thakre, A. B. Pandit, S. B. Sawant and J. B. Joshi, “Effect of Sparger Design and Height to Diameter Ratio on Gas Hold-up in Bubble Column Reactors,” Trans. Inst. Chem. Eng. A: Chem. Eng. Res. Des. 76, 823834 (1998).
  • Ueyama, K., S. Morooka, K. Koide, H. Kaji and T. Miyauchi, “Behavior of Gas Bubbles in Bubble Columns,” Ind. Eng. Chem. Res. 19(4), 592599 (1980).
  • Urseanu, M. I., R. P. M. Guit, A. Stankiewicz, G. van Kranenburg and J. H. G. M. Lommen, “Influence of Operating Pressure on the Gas Hold-up in Bubble Columns for High Viscous Media,” Chem. Eng. Sci. 60, 14651475 (2003).
  • Ustun, B., W. J. Melssen, M. Oudenhuijzen and L. M. C. Buydens, “Determination of Optimal Support Vector Regression Parameters by Genetic Algorithms and Simplex Optimization,” Anal. Chim. Acta 544, 292297 (2005).
  • Vapnik, V., S. Golowich and A. J. Smola, “Support Vector Method for Function Approximation, Regression Estimation and Signal processing,” Adv. Neural Inform. Process. Syst. 9, 281287 (1996).
  • Vatai, G. Y., and M. N. Tekic, “Gas Hold-up in Bubbles Columns with Non-Newtonian Liquids,” Chem. Eng. Sci. 42(1), 166169 (1987).
  • Walter, J. F. and H. W. Blanch, “Liquid Circulation Patterns and Their Effect on Gas Hold-Up and Axial Mixing in Bubble Columns,” Chem. Eng. Commun. 19, 243262 (1983).
  • Wang, K. and L. Fan, “Mass Transfer in Bubble Columns Packed with Motionless Mixers,” Chem. Eng. Sci. 33, 945952 (1978).
  • Wilkinson, P. M., A. P. Spek and L. L. van Dierendonck, “Design Parameters Estimation for Scale-Up of High Pressure Bubble Columns,” AICHE J. 38(4), 544554 (1992).
  • Wilkinson, P. M., H. Haringa, L. L. Van dierendonck, “Mass Transfer and Bubble Size in a Bubble Column under Pressure,” Chem. Eng. Sci. 49(9), 14171427 (1994).
  • Yang, G. Q. and L. S. Fan, “Axial Liquid Mixing in High-Pressure Bubble Columns,” AICHE J. 49(8), 19952008 (2003).
  • Yoshida, F. and K. Akita, “Performance of Gas Bubble Columns: Volumetric Liquid Phase Mass Transfer Coefficient and Gas Holdup,” AIChE J. 11, 913 (1965).
  • Zahradnik, J. and F. Kastanek, “Gas Holdup in Uniformly Aerated Bubble Column Reactors,” Chem. Eng. Commun. 3(4–5), 413429 (1979).
  • Zahradnik, J., J. Kratochvil, F. Kastanek and M. Rylek, “Energy Effectiveness of Bubble-Column Reactors With Sieve Tray and Ejector Type Gas Distributors,” Chem. Eng. Commun. 15(1–4), 2740 (1982).
  • Zahradnik, J., R. Peter and F. Kastanek, “The Effect of Liquid Phase Properties on Gas Hold-up in Bubble Column Reactors,” Coll. Czech. Chem. Commun. 52, 336342 (1987).
  • Zahradnik, J., M. Fialova, F. Kastanek, K. D. Green and N. H. Thomas, “The Effect of Electrolyte on Bubble Columns Coalescence and Gas Holdup in Bubble Column Reactors,” Trans. Inst. Chem. Eng. 73(A), 341346 (1995).
  • Zahradnik, J., M. Fialova, M. Ruzicka, J. Drahos, F. Kastanek and N. H. Thomas, “Duality of Gas–Liquid Flow Regimes in Bubble Column Reactors,” Chem. Eng. Sci. 52(21–22), 38113826 (1997).