Erratum to “CFD simulation of GAS–Solid bubbling fluidized bed: A new method for adjusting drag law”

Authors

  • Farshid Vejahati,

    1. Environmental Systems Engineering, Faculty of Engineering, University of Regina, 3737 Wascana Parkway, Regina, Saskatchewan, Canada, S4S 0A2
    Search for more papers by this author
  • Nader Mahinpey,

    Corresponding author
    1. Department of Chemical and Petroleum Engineering, Schulich School of Engineering, University of Calgary, 2500 University Drive NW Calgary, Alberta, Canada, T2N 1N4
    • Environmental Systems Engineering, Faculty of Engineering, University of Regina, 3737 Wascana Parkway, Regina, Saskatchewan, Canada, S4S 0A2
    Search for more papers by this author
  • Naoko Ellis,

    1. Department of Chemical and Biological Engineering, University of British Columbia, 2216 Main Mall, Vancouver, British Columbia, Canada, V6T 1Z4
    Search for more papers by this author
  • Mehrdokht B. Nikoo

    1. Environmental Systems Engineering, Faculty of Engineering, University of Regina, 3737 Wascana Parkway, Regina, Saskatchewan, Canada, S4S 0A2
    Search for more papers by this author

Errata

This article corrects:

  1. CFD simulation of gas–solid bubbling fluidized bed: A new method for adjusting drag law Volume 87, Issue 1, 19–30, Article first published online: 25 February 2009

The authors have discovered a typo in Equation (35); in the denominator, the gas viscosity must be squared. The article was published in The Canadian Journal of Chemical Engineering, Volume 87, Issue 1, pages 19–30, February 2009. This has now been corrected as shown below. We apologize for any inconvenience this may have caused.

equation image

Ancillary