Trickle-bed reactors: Tracer study of liquid holdup and wetting efficiency at high temperature and pressure

Cited in:

CrossRef

This article has been cited by:

1. 1
   Zhen-Min Cheng, Xiang-Ming Kong, Jun Zhu, Zhen-Yuan Wang, Jian Jin, Zi-Bin Huang, Hydrodynamic modeling on the external liquid–solid wetting efficiency in a trickling flow reactor, AIChE Journal, 2013, 59, 1

   Direct Link:

   • Abstract
   • Full Article (HTML)
   • PDF(1141K)
   • References
2. 2
   Jian Jin, Zhen-Min Cheng, Jing-Gang Li, Si-Cao Wu, Hydrodynamics of multiphase flow in a trickle-bed filled with small particles under the supercritical condition, Chemical Engineering Science, 2013,

   CrossRef

3. 3
   Modeling of Processes and Reactors for Upgrading of Heavy Petroleum, 2013,

   CrossRef

4. 4
   Anton Alvarez, Jorge Ancheyta, Transient behavior of residual oil front-end hydrodemetallization in a trickle-bed reactor, Chemical Engineering Journal, 2012, 197, 204

   CrossRef

5. 5
   Anna A. Lysova, Agnes von Garnier, Edme H. Hardy, Rainer Reimert, Igor V. Koptyug, The influence of an exothermic reaction on the spatial distribution of the liquid phase in a trickle bed reactor: Direct evidence provided by NMR imaging, Chemical Engineering Journal, 2011, 173, 2, 552

   CrossRef

6. 6
   F. Augier, A. Koudil, A. Royon-Lebeaud, L. Muszynski, Q. Yanouri, Numerical approach to predict wetting and catalyst efficiencies inside trickle bed reactors, Chemical Engineering Science, 2010, 65, 1, 255

   CrossRef

7. 7
   Fabián S. Mederos, Ignacio Elizalde, Jorge Ancheyta, Steady-State and Dynamic Reactor Models for Hydrotreatment of Oil Fractions: A Review, Catalysis Reviews, 2009, 51, 4, 485

   CrossRef

8. 8
   Markus Schubert, Günther Hessel, Cornelius Zippe, Rüdiger Lange, Uwe Hampel, Liquid flow texture analysis in trickle bed reactors using high-resolution gamma ray tomography, Chemical Engineering Journal, 2008, 140, 1-3, 332

   CrossRef

9. 9
   Loïc Baussaron, Carine Julcour-Lebigue, Anne-Marie Wilhelm, Henri Delmas, Christophe Boyer, Wetting topology in trickle bed reactors, AIChE Journal, 2007, 53, 7

   Direct Link:

   • Abstract
   • Full Article (HTML)
   • PDF(898K)
   • References
10. 10
    K.D.P. Nigam, F. Larachi, Process intensification in trickle-bed reactors, Chemical Engineering Science, 2005, 60, 22, 5880

    CrossRef

11. 11
    Bora Aydin, Faı¨çal Larachi, Trickle bed hydrodynamics and flow regime transition at elevated temperature for a Newtonian and a non-Newtonian liquid, Chemical Engineering Science, 2005, 60, 23, 6687

    CrossRef

12. 12
    Arunabha Kundu, K. D. P. Nigam, R. P. Verma, Catalyst wetting characteristics in trickle-bed reactors, AIChE Journal, 2003, 49, 9

    Direct Link:

    • Abstract
    • PDF(435K)
    • References
13. 13
    L J. I. Coleman, R R. Hudgins, P L. Silveston, 1st moment in the Colombo model used to calculate solid–liquid contacting effectiveness in trickle bed reactors, Chemical Engineering Science, 2002, 57, 14, 2875

    CrossRef

14. 14
    María A. Callejas, María T. Martínez, Evaluation of Kinetic and Hydrodynamic Models in the Hydroprocessing of a Trickle-Bed Reactor, Energy & Fuels, 2002, 16, 3, 647

    CrossRef

15. 15
    Milorad P. Duduković, Faical Larachi, Patrick L. Mills, Multiphase catalytic reactors: a perspective on current knowledge and future trends, Catalysis Reviews, 2002, 44, 1, 123

    CrossRef

16. 16
    G. G. Martens, G. B. Marin, Kinetics for hydrocracking based on structural classes: Model development and application, AIChE Journal, 2001, 47, 7

    Direct Link:

    • Abstract
    • PDF(1468K)
    • References
17. 17
    F. Larachi, L. Belfares, B.P.A. Grandjean, Prediction of liquid - solid wetting efficiency in trickle flow reactors, International Communications in Heat and Mass Transfer, 2001, 28, 5, 595

    CrossRef

18. 18
    H. J. Pant, Arunabha Kundu, K. D. P. Nigam, RADIOTRACER APPLICATIONS IN CHEMICAL PROCESS INDUSTRY, Reviews in Chemical Engineering, 2001, 17, 3

    CrossRef

19. 19
    I. Iliuta, F. Larachi, M. H. Al-Dahhan, Double-slit model for partially wetted trickle flow hydrodynamics, AIChE Journal, 2000, 46, 3

    Direct Link:

    • Abstract
    • PDF(204K)
    • References
20. 20
    I. Iliuta, F. Larachi, M.H. Al-Dahhan, Multiple-Zone Model for Partially Wetted Trickle Flow Hydrodynamics, Chemical Engineering Research and Design, 2000, 78, 7, 982

    CrossRef

21. 21
    I. Iliuta, F. Larachi, B.P. A. Grandjean, Catalyst Wetting in Trickle-Flow Reactors, Chemical Engineering Research and Design, 1999, 77, 8, 759

    CrossRef

22. 22
    Miryan C. Cassanello, Ana L. Cukierman, Osvaldo M. Martinez, General criteria to analyze the role of mass transfer and hydrodynamics in trickle-bed reactors, Chemical Engineering & Technology, 1996, 19, 5

    Direct Link:

    • Abstract
    • PDF(805K)
    • References
23. 23
    Meng-Shyang Fu, Chung-Sung Tan, Liquid holdup and axial dispersion in trickle-bed reactors, Chemical Engineering Science, 1996, 51, 24, 5357

    CrossRef

24. 24
    Muthanna H. Al-Dahhan, Milorad P. Duduković, Catalyst wetting efficiency in trickle-bed reactors at high pressure, Chemical Engineering Science, 1995, 50, 15, 2377

    CrossRef

25. 25
    B. A. Schofield, Z. E. Ring, R. W. Missen, Solubility of hydrogen in a white oil, The Canadian Journal of Chemical Engineering, 1992, 70, 4

    Direct Link:

    • Abstract
    • PDF(336K)
    • References
26. 26
    Reactor Modeling in the Petroleum Refining Industry,

    Direct Link:

    • Summary
    • PDF(3028K)
    • References