The Canadian Journal of Chemical Engineering

Cover image for The Canadian Journal of Chemical Engineering

February 1997

Volume 75, Issue 1

Pages 3–272

  1. Editorial

    1. Top of page
    2. Editorial
    3. Articles
    4. Book Reviews
    1. Editorial (pages 3–4)

      Pierre J. Carreau

      Article first published online: 27 MAR 2009 | DOI: 10.1002/cjce.5450750101

    2. Éditorial (pages 3–4)

      Pierre J. Carreau

      Article first published online: 27 MAR 2009 | DOI: 10.1002/cjce.5450750102

  2. Articles

    1. Top of page
    2. Editorial
    3. Articles
    4. Book Reviews
    1. Chemical engineering research in pulp and paper introduction and overview (pages 5–7)

      Chad P. J. Bennington and Jacob H. Masliyah

      Article first published online: 27 MAR 2009 | DOI: 10.1002/cjce.5450750103

    2. A contribution to the modeling of kraft pulping (pages 8–15)

      Niraj Agarwal and Rick Gustafson

      Article first published online: 27 MAR 2009 | DOI: 10.1002/cjce.5450750104

    3. Chlorine dioxide delignification kinetics and eop extraction of softwood kraft pulp (pages 23–30)

      Patrick Tessier and Martin Savoie

      Article first published online: 27 MAR 2009 | DOI: 10.1002/cjce.5450750106

    4. Kinetics of the peracetic acid decomposition: Part II: pH effect and alkaline hydrolysis (pages 42–47)

      Z. Yuan, Y. Ni and A. R. P. Van Heiningen

      Article first published online: 27 MAR 2009 | DOI: 10.1002/cjce.5450750109

    5. Kinetics of hydrogen peroxide bleaching of ALCELL® derived pulp (pages 48–52)

      Y. Ni, C. Dixon and T. Ooi

      Article first published online: 27 MAR 2009 | DOI: 10.1002/cjce.5450750110

    6. Gas—liquid mass transfer in pulp suspension mixing operations (pages 53–61)

      C. P. J. Bennington, G. Owusu and D. W. Francis

      Article first published online: 27 MAR 2009 | DOI: 10.1002/cjce.5450750111

    7. Bleach activation of thermomechanical pulp (pages 62–69)

      M. M. Sain, C. Daneault and M. Parenteau

      Article first published online: 27 MAR 2009 | DOI: 10.1002/cjce.5450750112

    8. Optimizing refiner operation with statistical modelling (pages 79–87)

      G. Broderick, R. Lanovette and J. L. Valade

      Article first published online: 27 MAR 2009 | DOI: 10.1002/cjce.5450750114

    9. Removal of contaminants from recirculated white water by ultrafiltration and/or biological treatment (pages 88–94)

      P. Elefsiniotis, E. R. Hall and R. M. Johnson

      Article first published online: 27 MAR 2009 | DOI: 10.1002/cjce.5450750115

    10. Étude comparative de flux et de performances lors du traitement d'effluent papetiers par bioréacteur à membranes (pages 95–103)

      Robert Dufresne, R. E. Lebrun and H. C. Lavallée

      Article first published online: 27 MAR 2009 | DOI: 10.1002/cjce.5450750116

    11. Kinetics of organochlorine removal from bleached kraft pulp mill effluent during biological treatment (pages 104–112)

      Chandra S. Tripathi and D. Grant Allen

      Article first published online: 27 MAR 2009 | DOI: 10.1002/cjce.5450750117

    12. On the clean and efficient thermal treatment of de-inking solid residues (pages 113–120)

      Janusz A. Kozinski, Guohui Zheng, Raafat Saade and Sergio Di Lalla

      Article first published online: 27 MAR 2009 | DOI: 10.1002/cjce.5450750118

    13. Phenolic compounds from vacuum pyrolysis of wood wastes (pages 121–126)

      H. Pakdel, C. Roy, C. Amen-Chen and C. Roy

      Article first published online: 27 MAR 2009 | DOI: 10.1002/cjce.5450750119

    14. A new method to determine the composition of biomass by thermogravimetric analysis (pages 127–133)

      Valerio Cozzani, Aldo Lucchesi, Giusto Stoppato and Giuseppe Maschio

      Article first published online: 27 MAR 2009 | DOI: 10.1002/cjce.5450750120

    15. Performance assessment of multivariate control loops on a paper-machine headbox (pages 134–142)

      Biao Huang, Sirish L. Shah, K. Ezra Kwok and Jim Zurcher

      Article first published online: 27 MAR 2009 | DOI: 10.1002/cjce.5450750121

    16. MD-CD interaction modeling and control of paper machines (pages 143–151)

      K. Ezra Kwok and Ping Li

      Article first published online: 27 MAR 2009 | DOI: 10.1002/cjce.5450750122

    17. Multimodel-based minimum bias control of a benchmark paper machine process (pages 152–160)

      D. Y. Liu, D. G. Fisher, S. L. Shah and X. Liu

      Article first published online: 27 MAR 2009 | DOI: 10.1002/cjce.5450750123

    18. The role of poly (ethylene oxide)-water solution phase behaviour in the retention of fibre fines and clay (pages 161–166)

      Khizyr K H. Khoultchaev, Richard J. Kerekes and Peter Englezos

      Article first published online: 27 MAR 2009 | DOI: 10.1002/cjce.5450750124

    19. Fundamental characteristics of combined impingement and through air drying of paper (pages 167–175)

      G. Chen, R. H. Crotogino and W. J. M. Douglas

      Article first published online: 27 MAR 2009 | DOI: 10.1002/cjce.5450750125

    20. Quantitative analysis of combined impingement and through air drying of paper (pages 176–189)

      G. Chen, R. H. Crotogino and W. J. M. Douglas

      Article first published online: 27 MAR 2009 | DOI: 10.1002/cjce.5450750126

    21. Cold flow velocity measurements in recovery boilers: Part I: Interaction of primary and secondary air flows (pages 190–195)

      I. Karidio, V. Uloth, C. Markovic and P. Thorn

      Article first published online: 27 MAR 2009 | DOI: 10.1002/cjce.5450750127

    22. Hardwood fibre fractionation using rotating cone (pages 196–204)

      V. B. Rewatkar and J. H. Masliyah

      Article first published online: 27 MAR 2009 | DOI: 10.1002/cjce.5450750128

    23. Micro- and macroscopic aspects of polymer bonded paper (pages 205–213)

      R. G. Jonasson and D. Henry

      Article first published online: 27 MAR 2009 | DOI: 10.1002/cjce.5450750129

    24. Kinetics of the heterogeneous catalytic decomposition of methane (pages 229–237)

      Sandor Kristyan

      Article first published online: 27 MAR 2009 | DOI: 10.1002/cjce.5450750131

    25. Sequential design including initial experimental runs for a kinetic study of propylene oxidation (pages 238–244)

      T. T. Akiti, Jr. L. D. Bircumshaw and R. E. Eckert

      Article first published online: 27 MAR 2009 | DOI: 10.1002/cjce.5450750132

  3. Book Reviews

    1. Top of page
    2. Editorial
    3. Articles
    4. Book Reviews

SEARCH

SEARCH BY CITATION