The Canadian Journal of Chemical Engineering

Cover image for The Canadian Journal of Chemical Engineering

August 2007

Volume 85, Issue 4

Pages 386–557

  1. Articles

    1. Top of page
    2. Articles
    1. The Use of Simplified or Misspecified Models: Linear Case (pages 386–398)

      Shaohua Wu, T. J. Harris and K. B. Mcauley

      Article first published online: 19 MAY 2008 | DOI: 10.1002/cjce.5450850401

    2. Identification of Multivariable Delay Processes in Presence of Nonzero Initial Conditions and Disturbances (pages 399–407)

      Qing-Guo Wang, Chang Chieh Hang, Min Liu and Wei Tang

      Article first published online: 19 MAY 2008 | DOI: 10.1002/cjce.5450850402

    3. You have free access to this content
      Non-Linear Model Predictive Control: A Personal Retrospective (pages 408–415)

      B. Wayne Bequette

      Article first published online: 19 MAY 2008 | DOI: 10.1002/cjce.5450850403

    4. Characteristics-Based Model Predictive Control of a Catalytic Flow Reversal Reactor (pages 424–432)

      A. M. Fuxman, J. F. Forbes and R. E. Hayes

      Article first published online: 19 MAY 2008 | DOI: 10.1002/cjce.5450850405

    5. Integration of Design and Control: A Robust Control Approach Using MPC (pages 433–446)

      N. Chawankul, La Ricardez Sandoval, H. Budman and P. L. Douglas

      Article first published online: 19 MAY 2008 | DOI: 10.1002/cjce.5450850406

    6. Dependence of the Error in the Optimal Solution of Perturbation-Based Extremum Seeking Methods on the Excitation Frequency (pages 447–453)

      Moncef Chioua, Bala Srinivasan, Martin Guay and Michel Perrier

      Article first published online: 19 MAY 2008 | DOI: 10.1002/cjce.5450850407

    7. Reference Trajectory Optimization Under Constrained Predictive Control (pages 454–464)

      David K. Lam, Rhoda Baker and Christopher Le Swartz

      Article first published online: 19 MAY 2008 | DOI: 10.1002/cjce.5450850408

    8. Using Dynamic Optimization Technique to Study the Operation of Batch Reactors (pages 465–478)

      Daim-Yuang Sun, Pi-Min Lin and Shu-Ping Lin

      Article first published online: 19 MAY 2008 | DOI: 10.1002/cjce.5450850409

    9. On-Line Feedback Control for Optimal Periodic Control Problems (pages 479–489)

      Kai Höffner, Nicolas Hudon and Martin Guay

      Article first published online: 19 MAY 2008 | DOI: 10.1002/cjce.5450850410

    10. On Measuring Closed-Loop Non-Linearity: A Topological Approach (pages 490–505)

      Guan Tien Tan, Mihai Huzmezan and K. Ezra Kwok

      Article first published online: 19 MAY 2008 | DOI: 10.1002/cjce.5450850411

    11. Simulation-Based Design of Dual-Mode Controller for Non-Linear Processes (pages 506–511)

      Jong Min Lee and Jay H. Lee

      Article first published online: 19 MAY 2008 | DOI: 10.1002/cjce.5450850412

    12. Detection, Diagnosis and Root Cause Analysis of Sheet-Break in a Pulp and Paper Mill with Economic Impact Analysis (pages 512–525)

      S. A. Imtiaz, S. L. Shah, R. Patwardhan, H. A. Palizban and J. Ruppenstein

      Article first published online: 19 MAY 2008 | DOI: 10.1002/cjce.5450850413

    13. Fault Detection of Non-Linear Processes Using Kernel Independent Component Analysis (pages 526–536)

      Jong-Min Lee, S. Joe Qin and In-Beum Lee

      Article first published online: 19 MAY 2008 | DOI: 10.1002/cjce.5450850414

    14. Approximate Pole Placement with Dominance for Continuous Delay Systems by PID Controllers (pages 549–557)

      Qing-Guo Wang, Min Liu and Chang Chieh Hang

      Article first published online: 19 MAY 2008 | DOI: 10.1002/cjce.5450850416

SEARCH

SEARCH BY CITATION