By continuing to browse this site you agree to us using cookies as described in About Cookies
Notice: Wiley Online Library will be unavailable on Saturday 7th Oct from 03.00 EDT / 08:00 BST / 12:30 IST / 15.00 SGT to 08.00 EDT / 13.00 BST / 17:30 IST / 20.00 SGT and Sunday 8th Oct from 03.00 EDT / 08:00 BST / 12:30 IST / 15.00 SGT to 06.00 EDT / 11.00 BST / 15:30 IST / 18.00 SGT for essential maintenance. Apologies for the inconvenience.
Invited for this month′s cover is the group of Gregory Parsons at North Carolina State University. The image shows one cycle of TiO2atomic layer deposition (ALD), in which the sequential dosing and purging of TiCl4and H2O forms ultrathin and conformal TiO2films on rough FTO glass. Pinhole-free ALD TiO2forms a blocking layer to impede electron–hole recombination at the FTO/electrolyte interface in dye-sensitized solar cells. The ALD process allows discrete tuning of the blocking-layer thickness to maximize performance improvement. Read the full text of the article at 10.1002/cssc.201300067
What is the most significant result of this study?
12We find that a 5 nm thick ALD blocking layer is sufficient to suppress electron–hole recombination in dye-sensitized solar cells. The best-performing ALD blocking layer is thinner than layers formed by other thin film deposition methods, allowing good charge transport into the FTO to be maintained.
What time-consuming dead-ends delayed the results before this breakthrough?
It was difficult to obtain reliable and consistent results in each thickness. We had to standardize fabrication methods and then strictly follow the method for every sample preparation. Each device result reported represents the average of three devices made under the same conditions. We know, therefore, that the reported trends are readily reproducible.
What future opportunities do you see?
ALD blocking layers demonstrate how vapor-phase nanoscale material engineering can be important in an electrochemical system. We see significant new opportunities for ALD materials and processes in other photoelectrochemical and photoelectro-synthesis cell structures.
The authors acknowledge support from the U.S. Department of Energy Project (8NT0001925).