This article is part of a special section on CVD of Biomaterials.
Bio-integration Ceramics on 3D Specimens by Pulsed-Pressure Metal-Organic CVD†
Version of Record online: 4 MAR 2010
Copyright © 2010 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim
Chemical Vapor Deposition
Volume 16, Issue 1-3, pages 15–18, March 2010
How to Cite
Krumdieck, S., Siriwongrungson, V., Reyngoud, B. and Barnett, A. (2010), Bio-integration Ceramics on 3D Specimens by Pulsed-Pressure Metal-Organic CVD. Chem. Vap. Deposition, 16: 15–18. doi: 10.1002/cvde.200904284
- Issue online: 22 MAR 2010
- Version of Record online: 4 MAR 2010
- Manuscript Revised: 20 JAN 2010
- Manuscript Received: 3 DEC 2009
- 3D Deposition;
A number of biocompatible rods were coated with calcium phosphate and TiO2 using PP-MOCVD with one end heated to 600 °C. Films of both materials coated the length of the 3-D rod shape. The Ca:P material had an interesting spherical morphology as observed by SEM, had a Ca:P ratio in the range for hydroxyapitite as measured by EDS, and exhibited no crystalline peaks in XRD analysis.