Torrefaction of biomass has attracted considerable attention as a means to reduce biomass weight by 70% through removal of water and the hemicellulosic fractions while retaining most of the original high-energy cellulose and lignin content. Current torrefied wood pellets or briquettes cannot be shipped in open containers exposed to precipitation because they are not highly water resistant. A highly water repellent pelletized product is required to allow bulk shipping of torrefied wood pellets or briquettes via open railcar or by barge. We have recently developed a binder produced from biomass components that imparts the water repellent quality required to produce a torrefied product that is able to be shipped in open containers. Crushing strength of the pellets produced with this binder are high at between approximately 700 and 1100 psi. Water repellency tests indicate that upon total immersion the pellets absorb water into available pores up to 2–5%. The pellets can then be dried without unacceptable loss of strength. © 2012 American Institute of Chemical Engineers Environ Prog, 2012
If you can't find a tool you're looking for, please click the link at the top of the page to "Go to old article view". Alternatively, view our Knowledge Base articles for additional help. Your feedback is important to us, so please let us know if you have comments or ideas for improvement.