International Journal of Energy Research

Cover image for Vol. 37 Issue 8

25 June 2013

Volume 37, Issue 8

Pages 781–990

  1. Accelerated Publications

    1. Top of page
    2. Accelerated Publications
    3. Review Paper
    4. Research Articles
    5. Technical Notes
  2. Review Paper

    1. Top of page
    2. Accelerated Publications
    3. Review Paper
    4. Research Articles
    5. Technical Notes
    1. Boron-based hydrides for chemical hydrogen storage (pages 825–842)

      Georges Moussa, Romain Moury, Umit B. Demirci, Tansel Şener and Philippe Miele

      Article first published online: 2 MAR 2013 | DOI: 10.1002/er.3027

      Thumbnail image of graphical abstract

      Boron-based materials have shown a reviving interest over the past two decades in materials chemistry. Indeed, they are very promising as chemical hydrogen storage materials. The recent progresses have notably shown their attractive properties. This is surveyed herein.

  3. Research Articles

    1. Top of page
    2. Accelerated Publications
    3. Review Paper
    4. Research Articles
    5. Technical Notes
    1. Exergy and Energy Analysis of Combined Cycle systems with Different Bottoming Cycle Configurations (pages 899–912)

      Sanjay

      Article first published online: 15 FEB 2012 | DOI: 10.1002/er.2892

      Thumbnail image of graphical abstract

      Component-wise exergy destruction in heat recovery steam generator (HRSG) is lowest for B3P (0.9%) followed by B2P (1.23%) and B1P (3.2%) as a result of reduction of irreversibility associated with heat transfer in HRSG due to increase in number of pinch points with increase in number of HRSG pressure levels that leads to the decrease in temperature of heat transfer.

    2. Performance assessment and optimization of industrial pasta drying (pages 913–922)

      Neslihan Colak, Zafer Erbay and Arif Hepbasli

      Article first published online: 13 FEB 2012 | DOI: 10.1002/er.2895

      Thumbnail image of graphical abstract

      A four-step drying system in a farfalle pasta production line was exergetically analyzed for assessing and improving the efficiency of the drying process and the entire system along with its main components. Actual operational data were used in the analysis. The exergy efficiency values varied between 0.25% and 5.27% from the predrying to the final drying section, being 2.96% for the entire drying system. The highest exergetic improvement in potential rate (IP) was 165.54 kW for the first dryer section.

    3. You have free access to this content
    4. Success factors of energy management in energy-intensive industries: Development priority of energy performance measurement (pages 936–951)

      Leena Sivill, Jussi Manninen, Ilkka Hippinen and Pekka Ahtila

      Article first published online: 21 FEB 2012 | DOI: 10.1002/er.2898

      Thumbnail image of graphical abstract

      Energy-intensive industries have followed a learning curve in energy management. This paper identifies energy performance measurement as the third development priority of energy management, behind resource and commitment issues. Only by overcoming the found information gaps, energy performance can become a true organisational goal across all organisational levels and management functions.

    5. Investigation of adsorption properties of geological materials for CO2 storage (pages 952–958)

      Tanja Tajnik, Lučka Kajfež Bogataj, Egon Jurač, Cvetka Ribarič Lasnik, Jakob Likar and Brane Debelak

      Article first published online: 21 FEB 2012 | DOI: 10.1002/er.2901

  4. Technical Notes

    1. Top of page
    2. Accelerated Publications
    3. Review Paper
    4. Research Articles
    5. Technical Notes
    1. Techno-economic assessment for energy generation using bagasse: case study (pages 982–990)

      Farnaz Amin Salehi, Mohammad Ali Abdoli, Hossein Shokouhmand and Hamid Reza Jafari

      Article first published online: 14 MAR 2012 | DOI: 10.1002/er.2907

SEARCH

SEARCH BY CITATION