International Journal of Energy Research

Cover image for Vol. 38 Issue 1

January 2014

Volume 38, Issue 1

Pages 1–138

  1. Review Paper

    1. Top of page
    2. Review Paper
    3. Research Articles
    4. Short Communication
    1. You have full text access to this OnlineOpen article
      Vacuum insulated panels for sustainable buildings: a review of research and applications (pages 1–19)

      Sultan Sanat Alotaibi and Saffa Riffat

      Version of Record online: 9 OCT 2013 | DOI: 10.1002/er.3101

      Thumbnail image of graphical abstract

      Vacuum insulation panels are the state-of-the-art insulation materials that are just appearing on the market for building insulation. Silica-based VIPs with multilayered envelope structure provide low thermal conductivity rates (4–10 mW/mK) and have relatively long service lifetime of about 60 years for standard 50 × 50 cm panels with 20 mm thickness. However, VIPs are also very expensive in comparison with other insulating materials with costs running up to €2000/m3, which makes them feasible only in cases of rental costs starting at around €2400/m2.

  2. Research Articles

    1. Top of page
    2. Review Paper
    3. Research Articles
    4. Short Communication
    1. Heat losses from parabolic trough solar collectors (pages 20–28)

      A. Mohamad, J. Orfi and H. Alansary

      Version of Record online: 11 FEB 2013 | DOI: 10.1002/er.3010

    2. Adapting the pinch point analysis to improve the ORC design process (pages 29–40)

      Michał Ryms, Tadeusz Pyś and Ewa Klugmann-Radziemska

      Version of Record online: 29 JAN 2013 | DOI: 10.1002/er.3011

      Thumbnail image of graphical abstract
    3. Enhanced performance of direct methanol fuel cells: a study on the combined effect of various supporting electrolytes, flow channel designs and operating temperatures (pages 41–50)

      Piyush Kumar, Kingshuk Dutta and Patit Paban Kundu

      Version of Record online: 5 APR 2013 | DOI: 10.1002/er.3034

      Thumbnail image of graphical abstract

      In the presence of acids (2M sulphuric or 2M phosphoric acid), the poisoning effect on the surface of catalyst, is lower at low temperature (60 & 70°C), this leads to higher electrical efficiency. The better stack design for acidic fuel is A5SF2, having channel length of 650mm and an open ratio 52%. Maximum power density is achieved for fuel containing sulphuric acid is 42 mW cm−2 and for phosphoric acid is 36 mW cm−2.

    4. Nanofluids with encapsulated tin nanoparticles for advanced heat transfer and thermal energy storage (pages 51–59)

      Sreeram Cingarapu, Dileep Singh, Elena V. Timofeeva and Michael R. Moravek

      Version of Record online: 5 JUN 2013 | DOI: 10.1002/er.3041

      Thumbnail image of graphical abstract

      Addition of engineered phase change nanomaterials to heat transfer fluids is demonstrated to provide dual advantage: (i) by improving thermal conductivity and (ii) by increasing the thermal storage capacity due to the latent heat of nanomaterials phase change. Both properties are critical for increasing the efficiency and reducing the costs of energy production at Concentrated Solar Power Plants. Ceramic shells provide chemical stability to the tin cores and also prevent nanoparticle coalescence when the cores are melted.

    5. Understanding the significance of in situ coal properties for CO2 sequestration: An experimental and numerical study (pages 60–69)

      P. N. K. De Silva and P. G. Ranjith

      Version of Record online: 1 JUL 2013 | DOI: 10.1002/er.3062

      Thumbnail image of graphical abstract

      An advanced core flooding apparatus is used to investigate the in situ effects on CO2 storage. Experimental flow rate reductions of 70% and 98% are observed corresponding to pressures of 2 and 4 MPa, respectively. Flow rate and injection pressure has shown to follow, y = 1.4652(x)−0.798, with respect to numerical and experimental results.

    6. Development and application of vanadium oxide/polyaniline composite as a novel cathode catalyst in microbial fuel cell (pages 70–77)

      Khadijeh Beigom Ghoreishi, Mostafa Ghasemi, Mostafa Rahimnejad, Mohd Ambar Yarmo, Wan Ramli Wan Daud, Nilofar Asim and Manal Ismail

      Version of Record online: 23 JUL 2013 | DOI: 10.1002/er.3082

    7. Numerical investigation of thermal disassociation of ZnO for hydrogen production: Parametric study and reactor configuration (pages 78–93)

      Furqan Ahmad Khan and Kamran Siddiqui

      Version of Record online: 18 SEP 2013 | DOI: 10.1002/er.3097

      Thumbnail image of graphical abstract

      The study presents 3D numerical modeling of ZnO/Zn reduction step in a reactor. It proposes optimal reactor design by investigating the effect of different parameters and reactor configurations on the extent of ZnO reduction. It also discusses how flow velocity, temperature distribution, and ZnO particle residence time influence the extent of reduction. The figure shows contours of zinc gas concentration (kmol/m3) inside different reactor configurations.

    8. Performance and material selection of nanocomposite bipolar plate in proton exchange membrane fuel cells (pages 94–105)

      Reza Taherian and Mohammad Nasr

      Version of Record online: 10 SEP 2013 | DOI: 10.1002/er.3109

      Thumbnail image of graphical abstract

      Highlights

      • Manufacturing a triple-filler composite reinforced by carbon fiber cloth
      • Investigation on mechanical and physical properties of the developed composite
      • Assembling and testing the single-cell PEMFC made of the developed composite bipolar plate
      • Optimizing the cell-body-temperature, H2 and O2 inlet temperatures, and back-pressure
      • Material selection upon eleven bipolar plate materials using the SAWM approach
    9. Effects of magnetic field and pulse potential on hydrogen production via water electrolysis (pages 106–116)

      Ming-Yuan Lin and Lih-Wu Hourng

      Version of Record online: 21 SEP 2013 | DOI: 10.1002/er.3112

      Thumbnail image of graphical abstract

      Water electrolysis affected by magnetohydrodynamics and pulse potential is explored. Magnetic field affects the flow direction of bubbles during electrolysis, and pulse potential accelerates the bubbles to leave the surface of the electrode. Maximum increase of current density is about 38%.

    10. A comparison of operating strategies to reduce DMFC degradation (pages 117–124)

      F. Bresciani, A. Casalegno, J. L. Bonde, M. Odgaard and R. Marchesi

      Version of Record online: 1 OCT 2013 | DOI: 10.1002/er.3115

      Thumbnail image of graphical abstract
      • DMFC degradation has two components: permanent and temporary degradation that can be recovered and determines a strong recoverable performance reduction. Temporary degradation is maximized during steady-state operation;
      • The use of operating strategies involving OCV and cathode air interruption is a key point to reduce DMFC temporary degradation;
      • An experimental methodology to calculate DMFC degradation performing operating strategies is presented.
  3. Short Communication

    1. Top of page
    2. Review Paper
    3. Research Articles
    4. Short Communication
    1. Simulation of a localized heating system for broiler brooding to improve energy performance (pages 125–138)

      Omar El Mogharbel, Kamel Ghali, Nesreen Ghaddar and Mohamad G. Abiad

      Version of Record online: 30 MAR 2013 | DOI: 10.1002/er.3023

      Thumbnail image of graphical abstract

      This work evaluates the performance of a localized solar-assisted pen heating system for brooding using a 3D computational model of the heated space. The warm air-curtained pen ensures acceptable temperature and air velocity that meet the heat requirements of 100 chicks. Results show that air supplied at 40°C is capable of delivering the desired microenvironment at bird level. The localized heating system for a prototype of 16 pens consumed one third of the energy required by conventional system.

SEARCH

SEARCH BY CITATION