SEARCH

SEARCH BY CITATION

References

  • Adler, P. (1998). In Paul Landsbergis (Ed.), Lean production and worker health: A discussion. New Solutions, 8, 499523.
  • Adler, P., Goldoftas, B., & Levine, D. (1997). Ergonomic, employee involvement, and the Toyota production system: A case study of NUMMI's 1993 model introduction. Industrial and Labor Relations Review, 50, 416437.
  • American Conference for Governmental Industrial Hygienists (ACGIH). (2005). Hand activity level, 2005 TLV for chemical substances and physical agents and biological exposure limits. Cincinnati, ACGIH.
  • Armstrong, T. J., Fine, L. J., Goldstein, S. A., Lifshitz, Y. R., & Silverstein, B. A. (1987). Ergonomic considerations in hand and wrist tendonitis. Journal of Hand Surgery, 12A, 830837.
  • Babson, S. (1993). Lean or mean: The MIT model and lean production at Mazda. Labor Studies Journal, 18, 324.
  • Barnes, R. (1980). Motion and time study: Design and measurement of work. New York: Wiley.
  • Bernard, B. (Ed.). (1997). Musculoskeletal disorders and workplace factors: A critical review of the epidemiological evidence for work-related musculoskeletal disorders of the neck, upper extremity, and low back. Cincinnati, OH: U.S. Dept of Health, Education, and Welfare, Public Health Service, Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health.
  • Brenner, M., Fairris, D., & Ruser, J. (2004). Flexible work practices and occupational safety and health: Exploring the relationship between cumulative trauma disorders and workplace transformation. Industrial Relations, 43, 242264.
  • Burt, S., & Punnett, L. (1999). Evaluation of interrater reliability for posture observations in a field study. Applied Ergonomics, 30, 121135.
  • Ebersole, M., & Armstrong, T. J. (2002). Inter-rater reliability for hand activity level (HAL) and force metrics. Human Factor and Ergonomics Society Proceedings, Baltimore, MD.
  • Ebersole, M., & Armstrong, T. J. (2004). An analysis of task-based self-assessments of force. Human Factors and Ergonomics Society Proceedings, New Orleans, Louisiana.
  • Ebersole, M., & Armstrong, T. J. (2005). Analysis of an observational ratings scale for repetition, posture and force in selected manufacturing settings. Human Factors and Ergonomics Proceedings, Orlando, FL.
  • Ebersole, M., Lau, M., & Armstrong, T. J. (2005). Task-based measurement of force in automobile assembly using worker self-assessment, observational analysis and electromyography. Human Factors and Ergonomics Society Proceedings, Orlando, FL.
  • Frazer, M., Norman, R., Wells, R., & Neumann, W. (2003). The effects of job rotation on the risk of reporting low back pain. Ergonomics, 44, 904919.
  • Fucini, J., & Fucini, S. (1990). Working for the Japanese. New York: Free Press.
  • Genaidy, A. M., & Karwowski, W. (2003). Human performance in lean production environment: Critical assessment of research framework. Human Factors and Ergonomics in Manufacturing, 13, 317330.
  • Gittleman, M., Horrigan, M., & Joyce, M. (1998). “Flexible” workplace practices: Evidence from a nationally representative survey. Industrial and Labor Relations Review, 52, 99115.
  • Graham, L. (1995). On the line at Subaru-Isuzu: The Japanese model and the American worker. Ithaca, NY: ILR/Cornell University Press.
  • Jackson, P., & Martin, R. (1996). Impact of just-in-time on job content, employee attitudes, and well-being: A longitudinal study. Ergonomics, 39, 116.
  • Jorgensen, M., Davis, K., Kotowski, S., Aedla, P., & Dunning, K. (2005). Characteristics of job rotation in the Midwest US manufacturing sector. Ergonomics, 48, 17211733.
  • Juul-Kristensen, B., Hansson, G.-Å., Fallentin, N., Andersen, J. H., & Ekdahl, C. (2001). Assessment of work postures and movements using a video-based observation method and direct technical measurements. Applied Ergonomics, 32, 517524.
  • Krafcik, J. F. (1988). Triumph of the lean production system. Sloan Management Review, 30(1), 4152.
  • Landsbergis, P. (1999). The impact of lean production and related new system of work organization on worker health. Journal of Occupational Health Psychology, 4, 108130.
  • Landsbergis, P., Adler, P., Babson, S., Johnson, J., Kaminski, M., Lessin, N., et al. (1998). Lean production and worker health: A discussion. New Solutions, 8, 499523.
  • Latko, W. (1997). Development and evaluation of an observational method for quantifying exposure to hand activity and other physical stressors in manual work. University of Michigan, Ann Arbor.
  • Latko, W., Armstrong, T., Foulke, J., Herrin, G., Rabourn, R., & Ulin, S. (1997). Development and evaluation of an observational method for assessing repetition in hand tasks. American Industrial Hygiene Association Journal, 58, 278285.
  • Latko, W., Armstrong, T., Franzblau, A., Ulin, S., Werner, B., & Albers, J. (1999). Cross-sectional study of the relationship between repetitive work and the prevalence of upper limb musculoskeletal disorders. American Journal of Industrial Medicine, 36, 248259.
  • Leclerc, A., Franchi, P., Cristofari, M., Delemotte, B., Mereau, P., Teyssier-Cotte, C., et al. (1998). Carpal tunnel syndrome and work organization in repetitive work: A cross sectional study in France. Occupational & Environmental Medicine, 55, 180187.
  • Lewchuk, W., & Robertson, D. (1996). Working conditions under lean production: A worker-based benchmarking study. Asia Pacific Business Review, 2, 6081.
  • Liker, J. (Ed.). (1998). Becoming lean: Inside stories of U.S. manufacturers. Portland, OR: Productivity Press.
  • Liker, J. (2004). The Toyota way. New York: McGraw Hill.
  • Lowe, B. (2004a). Accuracy and validity of observational estimates of wrist and forearm posture. Ergonomics, 47, 527554.
  • Lowe, B. (2004b). Accuracy and validity of observational estimates of shoulder and elbow posture. Applied Ergonomics, 35, 159171.
  • MacDuffie, J. P. (1995). Workers' roles in lean production: The implications for worker representation. In SteveBabson (Ed.), Lean work: Employment and exploitation in the global auto industry (pp. 4153). Detroit: Wayne State University Press.
  • Marshall, M., & Armstrong, T. (2004). Observational assessment of forceful exertion and the perceived force demands of daily activities. Journal of Occupational Rehabilitation, 14, 281294.
  • National Institute for Occupational and Safety and Health (NIOSH). (1997). Elements of ergonomics programs: A primer based on workplace evaluations of musculoskeletal disorders. Department of Health and Human Services (NIOSH) Publication No. 97-117, Cincinnati, OH.
  • National Institute for Occupational and Safety and Health (NIOSH). (2002). The changing organization of work and the safety and health of working people: Knowledge gaps and research directions. Department of Health and Human Services (NIOSH) Publication No. 2002-116, Cincinnati, OH.
  • National Research Council and Institute of Medicine. (2001). Musculoskeletal disorders and the workplace: Low back and upper extremities. Panel on Musculoskeletal Disorders and the Workplace Commission on Behavioral and Social Sciences and Education National Research Council and Institute of Medicine, Washington, DC: National Academies Press.
  • Ohno, T. (1988). Toyota production system: Beyond large scale production. New York, NY: Productivity Press.
  • Osterman, P. (1994). How common is workplace transformation and who adopts it? Industrial and Labor Relations Review, 47, 173188.
  • Parker, M., & Slaughter, J. (1988). Management by stress. Technology Review, 91, 3644.
  • Parker, M., & Slaughter, J. (1995). Unions and management by stress. In SteveBabson (Ed.), Lean work: Employment and exploitation in the global auto industry (pp. 4153). Detroit: Wayne State University Press.
  • Parker, S. (2003). Longitudinal effects of lean production on employee outcomes and the mediating role of work characteristics. Journal of Applied Psychology, 88, 620634.
  • Schierhout, G. H., Meyers, J. E., & Bridger, R. S. (1995). Work related musculoskeletal disorders and ergonomic stressors in the South African workforce. Occupational & Environmental Medicine, 52, 4650.
  • Shingo, S. (1989). A study of the Toyota production system from an industrial engineering viewpoint. Cambridge, MA: Productivity Press.
  • Silverstein, B. A., Fine, L. J., & Armstrong, T. J. (1986). Hand wrist cumulative trauma disorders in industry. British Journal of Industrial Medicine, 43, 779784.
  • Suzaki, K. (1987). The new manufacturing challenge: Techniques for continuous improvement. New York: Free Press.
  • Womack, J., Jones, D., & Roos, D. (1990). The machine that changed the world. New York: Rawson Associates.
  • Womack, S. (2007). A multi-methodological study of the effects of lean manufacturing practices on work-related musculoskeletal disorder risk factors and other injuries. Unpublished doctoral dissertation, University of Michigan, Ann Arbor.
  • Womack, J., & Jones, D. (1996). Lean thinking: Banish waste and create wealth in your corporation. New York, NY: Simon and Schuster.