SEARCH

SEARCH BY CITATION

Keywords:

  • sediment control;
  • filter strips;
  • water quality;
  • modelling;
  • vegetation cover

Abstract

Soil and water conservation practices have been promoted for a long time, in order to sustain agricultural activities and prevent environmental pollution. Vegetated filter strips (VFS) have been used to reduce sediment pollution into water bodies at or near the pollutant source. However, factors effecting VFS performance under natural conditions have not been well understood owing to the physical, time and financial limitations of field experiments. The use of well-validated simulation models to understand the performance of VFS and factors affecting sediment deposition is highly justified. The objective of this research is to investigate sediment trapping in VFS and to study various factors affecting VFS performance using the simulation model VFSMOD, which was developed by researchers at University of North Carolina. Recently, VFSMOD has been validated successfully by using 21 filters with varying length, slope and vegetated cover. A wide range of five parameters was selected for the simulations, namely filter length, filter slope, manning roughness coefficient, soil type and characteristics of incoming sediment from adjacent fields. Computer simulations revealed that the length of filter is the most significant factor affecting sediment trapping in VFS. The relative increase in trapping efficiencies was not linearly related to an increase in filter length. Inflow sediment class also has a major influence on sediment trapping in VFS. The trapping efficiency of clay sediments in a 15 m length VFS was 47% compared with 92% for silt from incoming sediment. Manning roughness coefficient had a moderate effect on sediment trapping and was more significant in short filters. Land slope and soil type of VFS had a minor influence on the performance of VFS. Copyright © 2001 John Wiley & Sons, Ltd.