SEARCH

SEARCH BY CITATION

References

  • Abad, J. D., and M. H. Garcia (2006), RVR Meander: A toolbox for re-meandering of channelized streams, Comput. Geosci., 32, 92101, doi:10.1016/j.cageo.2005.05.006.
  • Abad, J. D., and M. H. Garcia (2009), Experiments in a high-amplitude Kinoshita meandering channel: 2. Implications of bend orientation on bed morphodynamics, Water Resour. Res., 45, W02402, doi:10.1029/2008WR007017.
  • Allen, J. R. L. (1978), Van Bendegom: A neglected innovator in meander studies, in Fluvial Sedimentology, edited by A. D. Miall, pp. 199209, University of Calgary, Calgary, Alberta, Canada,Canadian Society of Petroleum Geologists Memoir 5.
  • Blanckaert, K. (2009), Saturation of curvature-induced secondary flow, energy losses, and turbulence in sharp open-channel bends: Laboratory experiments, analysis, and modeling, J. Geophys. Res., 114, F03015, doi:10.1029/2008JF001137.
  • Blanckaert, K. (2010), Topographic steering, flow recirculation, velocity redistribution, and bed topography in sharp meander bends, Water Resour. Res., 46, W09506, doi:10.1029/2009WR008303.
  • Blanckaert, K., and H. J. de Vriend (2003), Nonlinear modeling of mean flow redistribution in curved open channels, Water Resour. Res., 39(12), 1375, doi:10.1029/2003WR002068.
  • Blanckaert, K., and H. J. de Vriend (2010), Meander dynamics: A nonlinear model without curvature restrictions for flow in open-channel bends, J. Geophys. Res., 115, F04011, doi:10.1029/2009JF001301.
  • Blanckaert, K., and W. H. Graf (2004), Momentum transport in sharp open-channel bends, J. Hydraul. Eng., 130(3), 186198.
  • Bolla Pittaluga, M., G. Nobile, and G. Seminara (2009), A nonlinear model for river meandering, Water Resour. Res., 45, W04432, doi:10.1029/2008WR007298.
  • Camporeale, C., P. Perona, A. Porporato, and L. Ridolfi (2007), Hierarchy of models for meandering rivers and related morphodynamic processes, Rev. Geophys., 45, RG1001, doi:10.1029/2005RG000185.
  • Crosato, A. (2008), Analysis and modelling of river meandering, Ph.D. thesis, Delft University of Technology.
  • de Vriend, H. J. (1977), A mathematical model of steady flow in curved shallow channels, J. Hydraul. Res., 15(1), 3754.
  • de Vriend, H. J., and N. Struiksma (1984), Flow and bed deformation in river bends, in River Meandering, edited by C. M. Elliot, pp. 810828, ASCE, New Orleans, Louisiana,ISBN 0-87262-393-9.
  • Engelund, F. (1974), Flow and bed topography in channel bends, J. Hydraul. Div., 100(11), 16311648.
  • Engelund, F. (1975), Instability of flow in a curved channel, J. Fluid Mech., 72, 145160.
  • Engelund, F., and E. Hansen (1967), A Monographon Sediment Transport in Alluvial Streams, Danish Technical Press, Copenhagen.
  • Fargue, L. (1868), Étude sur la corrélation entre la configuration du lit et la profondeur d'eau dans les rivières á fond mobile, Annales Des Ponts Et Chaussées., 38, 3492.
  • Finnie, J., B. Donnell, J. Letter, and R. S. Bernard (1999), Secondary flow correction for depth-averaged flow calculations, J. Eng. Mech., 125(7), 848863.
  • Francalanci, S., and L. Solari (2007), Gravitational effects on bed load transport at low shields stress: Experimental observations, Water Resour. Res., 43, W03424, doi:10.1029/2005WR004715.
  • Friedkin, J. F. (1945), A laboratory study of the meandering of alluvial rivers, Tech. Rep., U.S. Waterways Experiment Station, Mississippi.
  • Fryirs, K. A., and G. J. Brierly (2013), Geomorphic Analysis of River Systems: An Approach to Reading the Landscape, John Wiley & Sons, Ltd, Chichester,ISBN 978-1-4051-9275-0.
  • Hager, W. H. (2003), Fargue, founder of experimental river engineering, J. Hydraul. Res., 41(3), 227233, doi:10.1080/00221680309499967.
  • Hasegawa, K. (1984), Hydraulic research on planimetric forms. Bed topographies and flow in alluvial rivers, Ph.D. thesis, Hokkaido University.
  • Ikeda, S. (1982), Lateral bed load transport on side slopes, J. Hydraul. Div. ASCE, 108(HY11), 1369373.
  • Ikeda, S., G. Parker, and K. Sawai (1981), Bend theory of river meanders. - 1. Linear development, J. Fluid Mech., 112, 363377.
  • Johannesson, H., and G. Parker (1989), Velocity redistribution in meandering rivers, J. Hydraul. Eng., 115(8), 10191039.
  • Lambe T., and R. V. Whitman (eds.) (1979), Soil Mechanics: SI Version Wiley, New York.
  • Lancaster, S. T., and R. L. Bras (2002), A simple model of river meandering and its comparison to natural channels, Hydrol. Process., 16, 126, doi:10.1002/hyp.273.
  • Mosselman, E. (2005), Basic equations for sediment transport in CFD for fluvial morphodynamics, in Computational Fluid Dynamics; Applications in Environmental Hydraulics, edited by P. D. Bates, S. N. Lane, and R. I. Ferguson, chap. 4, pp. 7189, John Wiley & Sons, Ltd, Chichester.
  • Nanson, R. A. (2010), Flow fields in tightly curving meander bends of low width-depth ratio, Earth Surf. Processes Landforms, 35(2), 119135, doi:10.1002/esp.1878.
  • Nunner, W. (1956), Wärmeübergang und Druckabfall in rauhen Rohren, Tech. Rep. 455, VDI-Forschungsheft, Series B, Band 2.
  • Odgaard, A. J. (1981), Transverse bed slope in alluvial channel bends, J. Hydraul. Div. ASCE, 107(HY12, Proc. Paper 16750), 16771694.
  • Odgaard, A. J. (1989), River-meander model. I: Development, J. Hydraul. Eng., 115(11), 14331450.
  • Olesen, K. W. (1987), Bed topography in shallow river bends, Ph.D. thesis, Delft University of Technology.
  • Ottevanger, W., K. Blanckaert, and W. S. J. Uijttewaal (2012), Processes governing the flow redistribution in sharp river bends, Geomorphology, 163-164, 4445, Meandering Channels, doi:10.1016/j.geomorph.2011.04.049.
  • Parker, G., and E. D. Andrews (1985), Sorting of bed load sediment by flow in meander bends, Water Resour. Res., 21(9), 13611373.
  • Parker, G., G. Seminara, and L. Solari (2003), Bed load at low shields stress on arbitrarily sloping beds: Alternative entrainment formulation, Water Resour. Res., 39(7), 1183, doi:10.1029/2001WR001253.
  • Rozovskii, I. L. (1957), Flow of Water in Bends of Open Channels, Academy of Sciences of the Ukrainian SSR, Israel Program for Scientific Translation, 1961.
  • Rüther, N., and N. R. B. Olsen (2007), Modelling free-forming meander evolution in a laboratory channel using three-dimensional computational fluid dynamics, Geomorphology, 89(3-4), 308319, doi:10.1016/j.geomorph.2006.12.009.
  • Schnauder, I., and A. N. Sukhodolov (2012), Flow in a tightly curving meander bend: Effects of seasonal changes in aquatic macrophyte cover, Earth Surf. Processes Landforms, 37, 11421157, doi:10.1002/esp.3234.
  • Sekine, M., and G. Parker (1992), Bed-load transport on transverse slope. I, J. Hydraul. Eng. - ASCE, 118(4), 513535.
  • Seminara, G., L. Solari, and G. Parker (2002), Bed load at low shields stress on arbitrarily sloping beds: Failure of the Bagnold hypothesis, Water Resour. Res., 38(11), 1249, doi:10.1029/2001WR000681.
  • Struiksma, N. (1983a), Rivers—Point bar initiation in bends of alluvial rivers with dominant bed transport: Report on theoretical investigation, Tech. Rep. R657-XVII/W308-III, WL|Delft Hydraulics, Delft, Netherlands.
  • Struiksma, N. (1983b), Rivers—Results of movable bed experiments in the DHL curved flume: Report on experimental investigation, Tech. Rep. R657-XVIII/M1771, WL|Delft Hydraulics, Delft, Netherlands.
  • Struiksma, N. (1988), RIVCOM: A summary of results of some test computations, Tech. Rep., WL|Delft Hydraulics, Q794.
  • Struiksma, N., and A. Crosato (1989), Analysis of a 2 D bed topography model for rivers, in River Meandering, vol. 12, edited by S. Ikeda, G. Parker, pp. 153180, AGU, ISBN 0-87590-316-9, Washington, D.C.
  • Struiksma, N., K. W. Olesen, C. Flokstra, and H. J. de Vriend (1985), Bed deformation in curved alluvial channels, J. Hydraul. Res., 23(1), 5779.
  • Talmon, A., and J. -U. Wiesemann (2006), Influence of grain size on the direction of bed-load transport on transverse sloping beds, in Third. Int. Conf. on Scour and Erosion, pp. 632639, Nov 1-3, Amsterdam, ISBN-10 90-376-0503-6, ISBN-13 978-90-376-0503-7, CURTNET, Gouda.
  • Talmon, A. M., M. C. L. M. van Mierlo, and N. Struiksma (1995), Laboratory measurements of the direction of sediment transport on transverse alluvial-bed slopes, J. Hydraul. Res., 33(4), 495517.
  • van Bendegom, L. (1947), Some considerations on river morphology and river improvement, De Ingenieur, 59(4), B1B11.
  • van Rijn, L. C. (1984a), Sediment transport, part I: Bed load transport, J. Hydraul. Eng. - ASCE, 110(10), 14311456.
  • van Rijn, L. C. (1984b), Sediment transport, part II: Suspended load transport, J. Hydraul. Eng. - ASCE, 110(11), 16131641.
  • Vardy, A. (1990), Fluid Principles, McGraw-Hill, London.
  • Wu, W., W. Rodi, and T. Wenka (2000), 3D numerical modeling of flow and sediment transport in open channels, J. Hydraul. Eng., Am. Soc. Civ. Eng., 126(1), 415.
  • Zeng, J. (2006), Fully 3D non-hydrostatic model to compute flow, sediment transport and bed morphology changes for alluvial open channel bends, Ph.D. thesis, The Univ. of Iowa, Iowa City, Iowa.
  • Zeng, J., G. Constantinescu, and L. Weber (2005), Validation of a computational model to predict suspended and bed load sediment transport and equilibrium bed morphology in open channels, in River, Coastal and Estuarine Morphodynamics Conference, edited by M. Garcia, G. Parker, pp. 829836, Univ. of Illinois, Urbana Champaign .
  • Zeng, J., G. Constantinescu, K. Blanckaert, and L. Weber (2008), Flow and bathymetry in sharp open channel bend: Experiments and predictions, Water Resour. Res., 44(9), w09401, doi:10.1029/2007WR006303.
  • Zimmerman, C., and J. F. Kennedy (1978), Transverse bed slopes in curved alluvial streams, ASCE J. Hydraul. Div., 104(1), 3348.
  • Zolezzi, G., and G. Seminara (2001), Downstream and upstream influence in river meandering. Part 1. General theory and application to overdeepening, J. Fluid Mech., 438, 183211.