SEARCH

SEARCH BY CITATION

REFERENCES

  • 1
    Schmalzried TP, Fowble VA, Bitsch RG, et al. 2007. Total hip resurfacing. In: CallaghanJJ, RosenbergAG, RubashHE, editors. The adult hip. 2nd ed. Philadelphia, PA: Lippincott; p 969979.
  • 2
    Hing C, Back D, Shimmin A. 2007. Hip resurfacing: indications, results, and conclusions. Instr Course Lect 56: 171178.
  • 3
    Orthopedic Network News. 2007; 18 http://www.orthopedicnetworknews.com
  • 4
    Rieker CB, Schön R, Köttig P. 2004. Development and validation of a second-generation metal-on-metal bearing. Laboratory studies and analysis of retrievals. J Arthrop 19 (Suppl 3): 511.
  • 5
    Semlitsch M, Willert HG. 1997. Clinical wear behaviour of UHMWPE cups paired with metal and ceramic ball heads in comparison to metal-on-metal pairings of hip joint replacements. Proc Inst Mech Eng [H] 211: 7388.
  • 6
    Chan FW, Bobyn JD, Medley JB, et al. 1999. Wear and lubrication of metal-on-metal hip implants. Clin Orthop Rel Res 369: 1024.
  • 7
    Rasquinha VJ, Ranawat CS, Weiskopf J, et al. 2006. Serum metal levels and bearing surfaces in total hip arthroplasty. J Arthroplasty 21 (Suppl 2): 4752.
  • 8
    Hallab NJ, Mikecz K, Vermes C, et al. 2001. Differential lymphocyte reactivity to serum-derived metal–protein complexes produced from cobalt-based and titanium-based implant alloy degradation. J Biomed Mater Res 56: 427436.
  • 9
    Doorn PF, Campbell PA, Worrall J, et al. 1998. Metal wear particle characterization from metal on metal total hip replacements: transmission electron microscopy study of periprosthetic tissues and isolated particles. J Biomed Mater Res 42: 103111.
  • 10
    Catelas I, Campbell PA, Bobyn JD, et al. 2006. Wear particles from metal-on-metal total hip replacements: effects of implant design and implantation time. Proc Inst Mech Eng [H] 220: 195208.
  • 11
    Brown C, Williams S, Tipper JL, et al. 2007. Characterisation of wear particles produced by metal on metal and ceramic on metal hip prostheses under standard and micro-separation simulation. J Mater Sci Mater Med 18: 819827.
  • 12
    Korovessis P, Petsinis G, Repanti M, et al. 2006. Metallosis after contemporary metal-on-metal total hip arthroplasty. Five to nine-year follow-up. J Bone Joint Surg Am 88: 11831191.
  • 13
    Miloŝev I, Trebŝe R, Kovac S, et al. 2006. Survivorship and retrieval analysis of Sikomet metal-on-metal total hip replacements at a mean of seven years. J Bone Joint Surg Am 88: 11731182.
  • 14
    Jacobs JJ, Hallab NJ. 2006. Loosening and osteolysis associated with metal-on-metal bearings: a local effect of metal hypersensitivity? Bone Joint Surg Am 88: 11711172.
  • 15
    Lachiewicz PF. 2007. Metal-on-metal hip resurfacing: a skeptic's view. Clin Orthop Relat Res 465: 8691.
  • 16
    Wimmer MA, Loos J, Nassutt R, et al. 2001. The Acting wear mechanisms on metal-on-metal hip joint bearings—in vitro results. Wear 250: 129139.
  • 17
    Wimmer MA, Sprecher C, Hauert R, et al. 2003. Tribochemical reaction on metal-on-metal hip joint bearings—a comparison between in-vitro and in-vivo results. Wear 255: 10071014.
  • 18
    Wimmer MA, Fischer A. 2007. Tribology. In: CallaghanJJ, RosenbergAG, RubashHE, editors. The adult hip. 2nd ed. Philadelphia, PA: Lippincott; p 215–226.
  • 19
    Büscher R, Täger G, Dudzinski W, et al. 2005. Subsurface microstructure of metal-on-metal hip joints and its relation to wear particles generation. J Biomed Mater Res Part B Appl Biomater 72B: 206214.
  • 20
    Sprecher CM, Schneider E, Wimmer MA. 2005. Verschleisserscheinungsformen und – mechanismen von explantierten Metall–Metall Hüftendoprothesen in Relation zur Lebensdauer. Zeitschrift Mater 47: 96100.
  • 21
    Täger KH. 1976. Untersuchungen an Oberflächen und Neogelenkkapseln getragener McKee-Farrar Endoprothesen. Arch Orthop Unfall-Chir 86: 101113.
  • 22
    Büscher R, Gleising B, Dudzinski W, et al. 2004. The effects of subsurface deformation on the sliding wear behaviour of a microtextured high-nitrogen steel surface. Wear 257: 284291.
  • 23
    Wimmer MA, Nassutt R, Sprecher C, Loos J, Täger G, Fischer A. 2006. Investigation of stick phenomena in metal-on-metal hip joints after resting periods. Proc Inst Mech Eng [H] 220: 219227.
  • 24
    Dowson D, Hardaker C, Flett M, et al. 2004. A hip joint simulator study of the performance of metal-on-metal joints: Part II: design. J Arthroplasty 19 (Suppl 3): 124130.
  • 25
    Täger G, Euler E, Plitz W. 1997. Changes in shape of the McKee-Farrar hip endoprosthesis. Orthopäde 26: 142151.
  • 26
    Plitz W, Huber J, Refior HJ. 1997. Experimentelle Untersuchungen an Metall–Metall-Gleitpaarungen und ihre Wertigkeit hinsichtlich eines zu erwartenden in-vivo-Verhaltens. Orthopäde 26: 135141.
  • 27
    Chan FW, Bobyn JD, Medley JB, et al. 1996. Engineering issues and wear performance of metal on metal hip implants. Clin Orthop 333: 96107.
  • 28
    McKellop H, Park SH, Chiesa R, et al. 1996. In vivo wear of 3 types of metal-on-metal hip prostheses during 2 decades of use. Clin Orthop 329: 128140.
  • 29
    Semlitsch M, Streicher RM, Weber H. 1989. Verschleißverhalten von Pfannen und Kugeln aus CoCrMo-Gußlegierung bei langzeitig implantierten Ganzmetall Hüftprothesen. Orthopäde 18: 377381.
  • 30
    Lin IJ, Nadiv S, Grodzian DJM. 1975. Changes in the state of solids and mechano-chemical reactions in prolonged communition processes. Minerals Sci Eng 7: 313336.
  • 31
    Lauer JL, Fung SS. 1982. Microscopic contour changes of tribological surfaces by chemical and mechanical action. Trans ASLE 26: 430436.
  • 32
    Quinn TFJ. 1983. NASA interdisciplinary collaboration in tribology. A review of oxidational wear. NASA Contractor Report 3686.
  • 33
    Sullivan JL. 1987. The role of oxides in the protection of tribological surfaces. In: Proc. Conf. “Tribology—friction, lubrication, and wear. Fifty years on, 1.-3.7.1987.London: IMechE Publ. Ltd. p 283301.
  • 34
    Igual Muñoza A, Mischler S. 2007. Interactive effects of albumin and phosphate ions on the corrosion of CoCrMo implant alloy. J Electrochemical Soc 154: C562C570.
  • 35
    Yan Y, Neville A, Dowson D. 2006. Biotribocorrosion—an appraisal of the time dependence of wear and corrosion interactions: II. Surface analysis. J Phys D Appl Phys 39: 32063212.
  • 36
    Universal Protein Resource, UniProtKnowledgebase (UniProtKB), Section Swiss-Prot (UniProtKB/Swiss- Prot), P02768 (ALBU_HUMAN), Isoform 1 [UniParc], http://www.uniprot.org/uniprot/P02768
  • 37
    Odunuga S, Li Y, Kraschnotchekov P, et al. 2005. Forced chemical mixing in alloys driven by plastic deformation. Phys Rev Lett 95: 045901-1045902-4.
  • 38
    Rigney DA, Hammerberg JE. 1998. Unlubricated sliding behavior of metals. MRS Bull 23: 3236.
  • 39
    Rigney DA, Hammerberg JE. 1999. Mechanical mixing and the development of nanocrystalline material during the sliding of metals. Proc TMS Fall Meet 465474.
  • 40
    Rigney DA. 2000. Transfer, mixing and associated chemical and mechanical processes during the sliding of ductile materials. Wear 245: 19.
  • 41
    Subramanian K, Wu JH, Rigney DA. 2004. The role of vorticity in the formation of tribomaterial during sliding. Mater Res Soc Symp Proc 821: 97102.
  • 42
    Karthikeyan S, Kim HJ, Rigney DA. 2005. Velocity and strain-rate profiles in materials subjected to unlubricated sliding. Phys Rev Lett 95: 14.
  • 43
    Venkataraman B, Sundararajan G. 2000. Correlation between the characteristics of the mechanically mixed layer and wear behaviour of aluminium, Al-7075 alloy and Al-MMCs. Wear 245: 2238.
  • 44
    Singh JB, Cai W, Bellon P. 2007. Dry sliding of Cu–15 wt%Ni–8 wt%Sn bronze: wear behaviour and microstructures. Wear 263: 830841.
  • 45
    Hahn M, Gleising B, Dudzinski W, et al. 2008. Electron microscopical investigationof thermally sprayed coatings of cylinder walls after motor tests. Metallography (in press).
  • 46
    Karthikeyan S, Wu JH, Rigney DA. 2004. The role of vorticity in the formation of tribomaterial during sliding. In: AndersonPM, FoeckeT, MisraA, RuddRE, editors. Proceedings Symposium on Nanoscale Materials and Modeling-Relations among Processing, Microstructure, and Mechanical Properties. Vol. 821 Warrendale, PA: MRS; p 961966.
  • 47
    Pourzal R, Theissmann R, Morlock M, et al. 2009. Micro-structural alterations within different areas of articulating surfaces of a metal-on-metal hip resurfacing system. Wear DOI: 10.1016/j.wear.2009.01.012; (in press).
  • 48
    Mosey NJ, Müser MH, Woo TK. 2005. Molecular mechanisms for the functionality of lubricant additives. Science 307: 16121615.